Can't wait till spring to order mine. Me and a buddy will be ordering two kits and doing them the same day! Looks like a GREAT product Eric!
329097_10151144875184101_1020786818_o by boomersooner523, on Flickr
Past:
1995 Hellrot E36 M3: JBR LTW flywheel, TRM chip, Dinan exhaust and CAI
1999 Cosmos E36 M3 Engine: TRM Tune, M50 manifold, B&B Exhaust, BW ASC delete, AFe CAI and LOTS of other stuff
New: 2002 E46 M3, Imola, 6spd, KW V2, Stoptech BBK, Agency Power exhaust, Mason Engineering Strut bar
Just ordered a black kit for the MZ3. Thanks!
"If the Corvette is a rebellious child of the extended automotive family, the M coupe is the blackest of sheep." - via Car & Driver
I need to apologize to all of my customers who have ordered lately...it's about 20 of you guys. I am so sorry your orders have been delayed due to me being out of town. I have been in many other countries besides the good ole USA since the 9th. Normally I would have kits already built and ready to go for special occasions such as this which has only happened once or twice in the last few years. This time I was out of parts right when I got the call to leave town and couldn't prepare.
Please understand that this is a very unusual occurrence. I will do my best to get all the kits out the day after I return and I will use the most expeditious form of shipping I can afford for the kit you have purchased.
Very sorry for this unusually long delay.
-Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Ordered mine yesterday, Eric. Very excited!
329097_10151144875184101_1020786818_o by boomersooner523, on Flickr
Past:
1995 Hellrot E36 M3: JBR LTW flywheel, TRM chip, Dinan exhaust and CAI
1999 Cosmos E36 M3 Engine: TRM Tune, M50 manifold, B&B Exhaust, BW ASC delete, AFe CAI and LOTS of other stuff
New: 2002 E46 M3, Imola, 6spd, KW V2, Stoptech BBK, Agency Power exhaust, Mason Engineering Strut bar
Just ordered mine today!!! Pumped..
So... what if I install my M50 mani using the original t-body gasket?
Hey, Eric I just order my kit. I'm also installing a VF supercharger at the same time. I was wondering Is there anything special I have to do, when installing this kit with a supercharger? Air temp Location? Oil Separator/Cvclone Separator/Crankcase vent valve removal?
Thanks,
Omar
Hey Eric can you message me back when you get a chance. Thanks
I just ordered my kit yesterday. I'm PUMPED!!!
Just awaiting shipping details.
I bought a 96 328is a few months back and the guy gave me this kit with it, not installed yet saying he never got to it. He did forget to give me the instructions however if anyone coould help me get this thing on i would really appreciate it. or maybe digital copy of instructions from eric?
If I order are the kits being shipped quickly?
appreciate the comments.
sometimes shipping is much faster than other times. like now for instance, I have been trying to get my silicone hoses all week from my supplier...and they still don't come. so some people may have to wait depending on what color they order and if it is in stock at the time. I usually stock 10 of each color but I had a huge run on all colors in march and april that wiped my supplier out. so we're still trying to catch up with the increased demand.
hope this helps.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
No prob.
Hey eric my kit did not come with instructions any way you can supply those to me?
That's very odd. Send your email address to sales@m50manifold.com. I'll send you the URL to the full instructions.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Hi Eric,
I've already written an email but got no response.
I want to buy the M50 Manifold Kit # 3 package.
You for sending them to Germany?
How much does shipping cost?
Greetings Clyde
I have a European distributor in Belgium. Please contact them via email. Although I haven't heard from them in a while. See the link on my website. http://www.m50manifold.com
If you don't have any luck with that let me know and we'll figure something out.
-Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
I've already written two emails to Apec but I have so far received no reply.
I'm going to wait a few days should not happen, I will get back to you.
Hi Eric,
Still no message from apec.Kann I order directly from you.
Hey Eric,
After a couple of years researching the M50 manifold conversion and reviewing your web site, I was conviced this is an upgrade I want to do.....Today, I ordered the #3 full kit from you. What is the current lead time on shipping? Also, do the M52 fuel rails still need to be shimmed to seal the injectors properly. I only ask because your complete kit did not seem to have any washers in it.
Looking forward to doing the conversion!
S52, AA C38-81 stage 2 aftercooled supercharger (14 PSI), Meth injection, Gatorback belts, Provent 200 oil separator, ARP studs, VAC MLS head gasket, SAP delete, ASC delete, TB heating delete, CCV delete, post cat O2 sensors delete, vanos mechanical jam delete, M50 intake mani, Mishimoto radiator, 155f thermostat, Stewart pump, euro diesal fan, CES overflow tank, AEM digital gauges, Bavarian coils, BMP tuned headers, Magnaflow true duals exhaust, E60 530i ZF manual 6 speed, UUC EVO 3 shifter, stage 2 E46 UUC clutch with Fidanza FW, M3 front brakes/spindles, E46 328i rear brakes, adjustable rear camber arms, adjustable camber plates on Yellow DPS coil-overs, M3 crossbrace, Staggered 255/45Z and 235/40Z BF Goodrich G-Force Sport 2's on 17's, 3.91 LSD, MM aluminum underpanel, Z3 steering rack, UUC sways.
]]]
Anyone here knows what the user E36M3E (Eric) going on.
For days, no answer.
Last edited by Clyde1234; 06-11-2012 at 10:48 AM.
emails are better than thread posts. sales@m50manifold.com
I am working on a new EU distributor. As of now, if you can't get a kit from APEC I don't have a solution for you.
I believe I already answered the question about lead time and shimming the fuel rail via email to the purchaser.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Eric,
you have Email.
Just ordered on Sunday. Looking forward to the kit!
Yeah I ordered Saturday! Can't wait! Should I be expecting a confirmation email or anything? Or can I just assume it's gone through and everything if it shows up as paid on my paypal? Either way, I trust Eric, he has a great rep for selling these things. Can't wait to see the difference it makes!
Bookmarks