I'm all caught up on my back orders guys. Have everything ready to go except the used fuel rail covers. Those will probably never come back. I sell the new covers now for $105 and they are modified for this application.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
99 Alpine/Gutted ///M3
98 Estoril/M-Technic cloth ///M3
- RIP http://forums.bimmerforums.com/forum....php?t=1191513
I finished installing one of Eric's kits yesterday on a bone-stock 98 M3 sedan with 88K miles and am quite impressed. The instructions are clear, the quality of the supplied hardware is excellent, and the support is unbeatable. I started the install Sunday night and had a question regarding one of the vacuum hoses but didn’t want to call Eric at 9PM on Easter and was in no rush to complete the install so I emailed instead, figuring I’d hear back in a day or so. He replied with an answer in under 10 minutes.
When I finished up on Monday the car started surprisingly easy for having an empty fuel rail, idles great, and has no CEL or codes. I think it idles smoother than before the mod. I was shocked once I got it warmed up and nailed it on an open road – 6500 rpm comes up quick! I can’t imagine any other mod in the same price range that is as effective.
S54 swap DME flashing - $100
S54 swap CAN interface board (for proper A/C & check engine light) - $275
e36 SAP sim/secondary air pump simulator: $75 - standard or $170 - plug & play
e36 post-cat O2 sims: $115 shipped, plug & play
^^ sounds like you had a great experience. good to hear. I installed mine a couple weeks ago as well. great upgrade, couple that with a ltw flywheel and i'm sure you will really see 6500 before you know it!
Is this GB price still good? 155 to lower 48? If not, can you get another one going? I have the manifold but want to get the kit minus FRC.
Last edited by adamnur; 04-26-2011 at 08:23 PM.
sorry, no, the 155 price is gone. prices are on my website.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
I made up my mind and decided ill order from you soon. Hopefully next month. I just picked up a manifold.
Hello, i would like to buy one of your conversion kits, please can u msg me, i live in the uk and can use paypal.
www.uniqueintegrations.co.uk
has anyone had any trouble with this kit?
Lots of people have trouble with my kit. Then they call me and I help them and all is well.
I am in the process of rewriting the instructions...sorry its taking so long.
Any questions email me: sales@m50manifold.com
-Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
if you are good at following directions exactly and take the time to label everything you should have no problems. its when people rush through is when problems occur. great kit IMO.
Just curious, has anyone ran into a CA smog tech that noticed there was something different installed?
I absolutely don't see myself running into a problem where I live. Most smog stations around me are ran by redneck hicks.
-Mobile Device-
My car was smogged 3 different times by 3 different places since I have had the M50 manifold. they worried about my ECIS intake even though the CARB sticker was right there. but never a mention of the manifold. it looks perfectly stock...and quite frankly...it blows cleaner #s with the older manifold.
And I haven't had a customer tell me that they had smog probs on the visual.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Just ordered my kit. Cant wait to do this.
I have started a install trouble shooting guide. It's on the front page of my website: www.m50manifold.com http://www.m50manifold.com front page... downloadable PDF.
It is in the works now though. Not complete. A good start and will eventually incorporate most problems that can occur when doing this modification.
Hope this helps. Thanks.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
subscribed
hey wow ive been looking to swap in an M50 into my car for a while, started looking to collect parts. this package looks very clean and comprehensive. this is definitely going to be my M50 choice.
all the positive feedback definitely helps.
BMW 1995 E36 M3 Luxury Pkg. (Bostongruen Metallic 275)
BMW 1999 E36 323is Sport Pkg. (Orientblau Metallic 317)
iSociety
I'm interested in this kit. Pm sent.
I'm interested in this kit. Pm sent.
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Just bought a kit this morning!! Can't wait to try it out
97 E36 M3 PT6870 847whp
Bookmarks