Results 1 to 3 of 3

Thread: Please help me figure out vacuum to carbs!

  1. #1
    Join Date
    Jan 2010
    Location
    Grand Rapids, Mich. usa
    Posts
    56
    My Cars
    72 Bavaria, 94 Jeep,

    Please help me figure out vacuum to carbs!

    I am trying to smooth out the basic running of this car, but in the process found some interesting vacuum routing done by p/o. First off I found both of the two way solenoid valves (7-11) completely bypassed, and it would appear the vacuum lines running fromt the distributor are reversed from those in this diagram. Does that matter?
    BTW thanks xatlas0 for the manual!
    autobooks_manual_044

    IndexPreviousNext
    Last edited by Buffarea; 03-24-2010 at 05:22 PM.

  2. #2
    Join Date
    Sep 2004
    Location
    Alpharetta, Columbus GA
    Posts
    6,079
    My Cars
    94 540,72 3.0CS,'13 WRX
    That depends. Do you want to repair the emissions system, or bypass it?

  3. #3
    Join Date
    Jan 2010
    Location
    Grand Rapids, Mich. usa
    Posts
    56
    My Cars
    72 Bavaria, 94 Jeep,
    Not concerned with emissions so I will assume the 2 solenoids are not important, so onto the 2 vac lines. the advance was drawn from the manifold base and the retard was from the carb. There is also a seperate manifold vac line that runs down to a vac res under the battery, is this for the brakes?
    ?
    Last edited by Buffarea; 03-24-2010 at 09:27 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •