Results 1 to 7 of 7

Thread: E91 non start after tinkering with BMW Cables

  1. #1
    Join Date
    Sep 2020
    Location
    Paisley
    Posts
    15
    My Cars
    2006 BMW E91

    E91 non start after tinkering with BMW Cables

    Hi, was clearing airbag warning light and decided to do a nosey, went into NCS Expert just looking about next thing ABS light, tyre pressure monitor light, steering wheel lock symbol all on, after that non start then no ignition lights. I disconnected the battery for a while, then got ignition lights but no start just clicking, clicking coming from the rear window area and fuse box. I've disconnected the battery to stop the clicking, before anyone says I know it was stupid to tinker but that's what I do, any help gratefully accepted. Jim
    The older I get the wrong bits gets stiff.

  2. #2
    Join Date
    Aug 2019
    Location
    tirana
    Posts
    30
    My Cars
    e91 330xd
    Can you check with inpa what faults you have?

  3. #3
    Join Date
    Sep 2020
    Location
    Paisley
    Posts
    15
    My Cars
    2006 BMW E91
    Hi and thanks for the quick response, I cannot connect diagnostic cable as I don't have any ignition lights on, that is pressing the start button without touching the brake pedal.
    The older I get the wrong bits gets stiff.

  4. #4
    Join Date
    Jul 2004
    Location
    Houston, TX
    Posts
    12,529
    My Cars
    36 Cylinders
    Is it possible your battery is dead?
    -Abel

    - E36 328is ~210-220whp: Lots of Mods.
    - 2000 Z3: Many Mods.
    - 2003 VW Jetta TDI Manual 47-50mpg
    - 1999 S52 Estoril M Coupe
    - 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
    - 2019 M2 Competition, self-tuned, 504whp
    - 2016 Mini Cooper S

  5. #5
    Join Date
    Aug 2019
    Location
    tirana
    Posts
    30
    My Cars
    e91 330xd
    Or fuse

  6. #6
    Join Date
    Sep 2020
    Location
    Paisley
    Posts
    15
    My Cars
    2006 BMW E91
    Battery appears to be OK I disconnected straight away, I'll give it a charge just incase. I'm going to check the fuses later today, thanks for your input. Jim
    The older I get the wrong bits gets stiff.

  7. #7
    Join Date
    Sep 2020
    Location
    Paisley
    Posts
    15
    My Cars
    2006 BMW E91
    Hi, thanks all for your help, was a bad battery after all, been replaced all is well, thanks again. Jim
    The older I get the wrong bits gets stiff.

Similar Threads

  1. E46 320d Non start after head change
    By scottcollin in forum 1999 - 2006 (E46)
    Replies: 0
    Last Post: 10-03-2016, 02:47 PM
  2. BMW 740i 95' Will not start after work under console. HELP!
    By 740iaultimate in forum 1995 - 2001 (E38)
    Replies: 11
    Last Post: 05-14-2014, 02:53 PM
  3. 320d non start after fuel filter change
    By 55320d in forum General BMW Mechanical Help sponsored by RM European Auto Parts
    Replies: 2
    Last Post: 10-01-2011, 02:37 AM
  4. BMW X3 2005 won't start after sitting a few weeks
    By X3 RON in forum 1999+ X5, X6 (E53, E70, E71, F15, F16, G05, G06)
    Replies: 1
    Last Post: 02-22-2010, 01:45 PM
  5. car wont start after new motor!! bmw pros help
    By spitvenom in forum 1992 - 1999 M3 (E36)
    Replies: 8
    Last Post: 11-24-2006, 11:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •