Page 12 of 21 FirstFirst ... 23456789101112131415161718192021 LastLast
Results 276 to 300 of 512

Thread: E30 GT35 m52 street/track demo car

  1. #276
    Join Date
    Aug 2003
    Location
    Asheville NC
    Posts
    4,678
    My Cars
    2013 x1, 99 cherokee
    Quote Originally Posted by DTRguy View Post
    Ah... Actually, to be with me it is a prerequisite to know of and care about what is going on with our cars. She still misses the Golf and the attention it got (just like a woman LOL). She is truly coming around to the BMW though because it is not only going to be faster, it just looks way better doing it!


    My kind of woman!
    Luke
    03 330i

  2. #277
    Join Date
    Jul 2004
    Location
    Pluto
    Posts
    14,460
    My Cars
    93 325iS
    Quote Originally Posted by BadBoostedBmwM3 View Post
    You are prolly right around 375-400hp on setup with the custom intake manifold... I say this because you say you still going easy on timing.

    Awesome idea...
    So, do you all think that the cam blocks and flywheel are not accurate enough?? I have also before stuck a long extension down cyl. 1 sprak plug hole to find TDC.... which in the end made right at 20"hg in vacuum at idle, so it must be real close.
    I fully agree with the HP estimate.

    No, Jay uses the wheel to dial in base timing for a standalone. Not needed with a DME

  3. #278
    Join Date
    Jul 2002
    Location
    Delaware, OH
    Posts
    135
    My Cars
    SpecE30, 325iT, 335
    Just saw the car on it's way to MidO. Kevin walked me through some of the underhood work.

    This car is sick! I need to get another E30.
    Jeremy Lucas
    91 SpecE30, 84 911, 01 325iT, 07 335, 04 2500HD,
    Past Cars: 91 325iX, 95 M3, 02 Z06, 04 S2000, 01 STi Wagon, 01 Miata, 95 EG Si, 02 Boxster S, 87 535is, 06 HCH, 03 Golf TDi
    FastTechLimited.com - DL1/DASH3, Video4, Schroth, RaceLogic, Race-Keeper, Aim SOLO

  4. #279
    Join Date
    Jul 2008
    Location
    Boston, MA
    Posts
    5,661
    My Cars
    Alpine 97 328is
    Good lord this is a sweet build. Your car's exhaust note is otherworldly, especially considering it's an M52.
    1997 BMW 328is Alpine White // Dove Grey
    ZF Swapped | 3.23 LSD | FK Coilovers | 17x8.5 Borbet Type C | 75mm Wheel Studs | 12mm Vorshlag Spacers | 5000k HIDs | Euro Taillights | Suede Headliner/Pillars

  5. #280
    Join Date
    Aug 2004
    Location
    Dexter, MI
    Posts
    1,822
    My Cars
    BMW M235iR / SpecE30
    (This is Kevin signed in under Anthony's name...)

    Quote Originally Posted by SiGmA View Post
    I fully agree with the HP estimate.

    No, Jay uses the wheel to dial in base timing for a standalone. Not needed with a DME
    Really? Which estimate? Just FYI, the timing that is conservative is in and around the torque peak area not on top. So, I am only losing a little area under the curve where honestly makes it just a little easier to drive.

    Oh and yeah I had to tell my ECU where TDC was so my timing map numbers were in fact what my timing is.

    Quote Originally Posted by Jeremy Lucas View Post
    Just saw the car on it's way to MidO. Kevin walked me through some of the underhood work.

    This car is sick! I need to get another E30.
    Great meeting you Jeremy! And I am glad you liked it!

    Quote Originally Posted by EThirtySicks View Post
    Good lord this is a sweet build. Your car's exhaust note is otherworldly, especially considering it's an M52.

    Thanks! Yeah we love the exhaust note as well... kinda wish it revved higher
    -Anthony Magagnoli
    #80 BMW M235i Racing - Pirelli World Challenge TC - 2017 Rookie of the Year
    Rooster Hall Racing / FCP Euro
    '87 BMW SpecE30 #007 - 2012 NASA SpecE30 NATIONAL CHAMPION
    '08 BMW "130i" 6MT, '01 Z3 3.0i Coupe 5MT
    '88 Pontiac Fiero GT 5MT (my childhood dream car!)
    Send Your Teens to Street Survival

    Drive Faster Now

  6. #281
    Join Date
    Nov 2005
    Location
    06478
    Posts
    2,983
    My Cars
    2 e30's and an e34
    Quote Originally Posted by Z3SpdDmn View Post
    Thanks! Yeah we love the exhaust note as well... kinda wish it revved higher
    Whats your r3v limit now? Its pretty amazing what people are revving to these days. I KNOW i hit 8000-8200 on my STOCK NV valve train (and block :-X) at least TWICE...

    Ive heard of people spinning stock m52's to at LEAST 7200 with out issues. Obviously not romping on the rev limiter but still, 7200 is impressive. I plan on finding out how long my m52 will last at that r3v limit... Well see what they dyno says, if she keeps making power i might go a little higher
    -Chris

  7. #282
    Join Date
    Oct 2009
    Location
    Panhandle Florida
    Posts
    18
    My Cars
    E21 320is Hennarot
    My stock M50 single Vanos Valve springs let go at 7200! Be carefull in those upper RPMS ranges! This was a Stock Motor with only 68k on the Clock as well!

    Buttbump

  8. #283
    Join Date
    Jan 2008
    Location
    Louisville, KY
    Posts
    10,141
    My Cars
    turbo m3
    Quote Originally Posted by BadBoostedBmwM3 View Post
    You are prolly right around 375-400hp on setup with the custom intake manifold... I say this because you say you still going easy on timing.





    Awesome idea...
    So, do you all think that the cam blocks and flywheel are not accurate enough?? I have also before stuck a long extension down cyl. 1 sprak plug hole to find TDC.... which in the end made right at 20"hg in vacuum at idle, so it must be real close.
    My estimate.

    Quote Originally Posted by Z3SpdDmn View Post
    (This is Kevin signed in under Anthony's name...)



    Really? Which estimate? Just FYI, the timing that is conservative is in and around the torque peak area not on top. So, I am only losing a little area under the curve where honestly makes it just a little easier to drive.

    Oh and yeah I had to tell my ECU where TDC was so my timing map numbers were in fact what my timing is.



    Great meeting you Jeremy! And I am glad you liked it!




    Thanks! Yeah we love the exhaust note as well... kinda wish it revved higher
    My estimate.
    Last edited by BadBoostedBmwM3; 10-24-2009 at 01:43 PM. Reason: Automerged Doublepost
    This is my signature....

  9. #284
    Join Date
    Jul 2006
    Location
    Florence, KY, USA
    Posts
    713
    My Cars
    90 325is,89 325i24v
    AND WE'RE BACK! And... In one piece! I'll let Anthony describe his thoughts and opinions. We have TONS of video from every angle... Stay tuned! Oh and on the power... the consensus of pretty much everyone at the track was WELL OVER 400hp FWIW.

    Dreams To Reality Performance One Lap of America 2010 GT2SB winner, 4th Overall, car build http://forums.bimmerforums.com/forum/showthread.php?t=1268384

  10. #285
    Join Date
    Nov 2005
    Location
    06478
    Posts
    2,983
    My Cars
    2 e30's and an e34
    Good to hear everything went well! Definitely excited to see her in action!
    -Chris

  11. #286
    Join Date
    Dec 2007
    Location
    Provo, Utah
    Posts
    3,847
    My Cars
    66 chevelle, 89 turbo.
    Excellent! I am excited to see the vids!

  12. #287
    Join Date
    Jul 2004
    Location
    Pluto
    Posts
    14,460
    My Cars
    93 325iS
    Quote Originally Posted by Z3SpdDmn View Post
    (This is Kevin signed in under Anthony's name...)

    Really? Which estimate? Just FYI, the timing that is conservative is in and around the torque peak area not on top. So, I am only losing a little area under the curve where honestly makes it just a little easier to drive.

    Oh and yeah I had to tell my ECU where TDC was so my timing map numbers were in fact what my timing is.

    Great meeting you Jeremy! And I am glad you liked it!

    Thanks! Yeah we love the exhaust note as well... kinda wish it revved higher
    Ethon's estimate of 375-400. At 15psi on a 2.8L with a 35R you should be in that ballpark at least. I have a 8:1CR 3L stroked M50/52, and with 13* (realllly soft) of timing I made 382/402@15psi. I'm using an SC61 which shares the 35R's compressor map, its just non-DBB.
    Quote Originally Posted by DTRguy View Post
    AND WE'RE BACK! And... In one piece! I'll let Anthony describe his thoughts and opinions. We have TONS of video from every angle... Stay tuned! Oh and on the power... the consensus of pretty much everyone at the track was WELL OVER 400hp FWIW.
    I want to see the videos!

  13. #288
    Join Date
    Jul 2006
    Location
    Florence, KY, USA
    Posts
    713
    My Cars
    90 325is,89 325i24v
    Quote Originally Posted by SiGmA View Post
    Ethon's estimate of 375-400. At 15psi on a 2.8L with a 35R you should be in that ballpark at least. I have a 8:1CR 3L stroked M50/52, and with 13* (realllly soft) of timing I made 382/402@15psi. I'm using an SC61 which shares the 35R's compressor map, its just non-DBB.I want to see the videos!
    I am running more timing than that FWIW.

    First video. The only one I have on my camera (which sux) Saturday, third session, damp and drizzling on the front straight of Mid O Crushing a GT3 cup car

    [ame]http://s223.photobucket.com/albums/dd315/DTRGuy/?action=view&current=MVI_1726.flv[/ame]

    Big thanks go out to Bimmertools.com for coming through for us! I know I felt a lot safer in the car! Don't think we could have done it without the help! Thanks again!
    Last edited by DTRguy; 10-26-2009 at 10:18 AM.

    Dreams To Reality Performance One Lap of America 2010 GT2SB winner, 4th Overall, car build http://forums.bimmerforums.com/forum/showthread.php?t=1268384

  14. #289
    Join Date
    May 2006
    Location
    Suffolk, VA
    Posts
    1,969
    My Cars
    99 Mcoupe|12 X5D|11 335D
    SOOOO BADASS!!! What were guys response after the runs?

  15. #290
    Join Date
    Jul 2006
    Location
    Florence, KY, USA
    Posts
    713
    My Cars
    90 325is,89 325i24v
    Quote Originally Posted by badluckM3 View Post
    SOOOO BADASS!!! What were guys response after the runs?
    I'd like Anthony to have a chance to chime in... But, the common theme from what I heard was basically something to the effect of "Damn that car is FAST!" was really cool to hear I have to say. (I was actually either too scared, or nervous or both to ride in the car for all six sessions )

    Dreams To Reality Performance One Lap of America 2010 GT2SB winner, 4th Overall, car build http://forums.bimmerforums.com/forum/showthread.php?t=1268384

  16. #291
    Join Date
    Oct 2009
    Location
    Panhandle Florida
    Posts
    18
    My Cars
    E21 320is Hennarot
    Nice! Can't wait to show the boys in our local Porsche Club!

    Buttbump

  17. #292
    Join Date
    Jul 2006
    Location
    Florence, KY, USA
    Posts
    713
    My Cars
    90 325is,89 325i24v
    Quote Originally Posted by buttbump View Post
    Nice! Can't wait to show the boys in our local Porsche Club!

    Buttbump
    Hopefully the incar of us humbling the 996TT comes in nice and clear too!

    Dreams To Reality Performance One Lap of America 2010 GT2SB winner, 4th Overall, car build http://forums.bimmerforums.com/forum/showthread.php?t=1268384

  18. #293
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    sick car guys! I'd love to see it on the strip

    Oh and don't put a big stupid spoiler on it. It would ruin the clean lines of the car which you perfected.
    Last edited by someguy2800; 10-26-2009 at 12:29 PM.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  19. #294
    Join Date
    Jul 2006
    Location
    Florence, KY, USA
    Posts
    713
    My Cars
    90 325is,89 325i24v
    Quote Originally Posted by someguy2800 View Post
    sick car guys! I'd love to see it on the strip

    Oh and don't put a big stupid spoiler on it. It would ruin the clean lines of the car which you perfected.

    No spoiler... WING. And sorry it's getting one. You would want it too at 180!... In fact we could have used it this weekend! The tires spun at around 110mph in the kink in FOURTH gear! Um, downforce is needed.

    Dreams To Reality Performance One Lap of America 2010 GT2SB winner, 4th Overall, car build http://forums.bimmerforums.com/forum/showthread.php?t=1268384

  20. #295
    Join Date
    Dec 2007
    Location
    Provo, Utah
    Posts
    3,847
    My Cars
    66 chevelle, 89 turbo.
    SO Sick!

  21. #296
    Join Date
    Aug 2003
    Location
    San Diego,CA,USA
    Posts
    24,275
    My Cars
    1997 Turbo M3 Coupe
    I apologize for not adding this to the Tried & Tested thread sooner. This car is AWESOME!

    I can't wait to see MOAR!!!!
    Where have I been? Astral projecting.

    Quote Originally Posted by jszy25 View Post
    Get drunk with Mike Radowski they said, it'll be fun they said...A broken toe, the worst hangover known to man, and bite marks in my arm said otherwise

  22. #297
    Join Date
    Jul 2004
    Location
    Pluto
    Posts
    14,460
    My Cars
    93 325iS
    If you're running more timing I almost promise you're over the 400 mark. My numbers were with flat timing from 4k up. By adding 4* at redline (advancing as rpms go up) thr car pulls far harder, shaving nearly a second off of the 69-121 time with no other changes. Would you mind sending me your timing map? I'm just curious as to what you're running.

    NICE vid Kevin!

  23. #298
    Join Date
    Aug 2004
    Location
    Dexter, MI
    Posts
    1,822
    My Cars
    BMW M235iR / SpecE30
    A couple quick comments... Then gotta get back to work.

    I was not expecting to be able to drive this car as I wished this weekend. After such a lengthy build, I was fully expecting to have some sort of major issue that would either prevent us from running the whole weekend or having to drive around some issue. The fact was, that, after the ~5 lap damp warm up session, it was only a couple laps before I started driving this thing like it wasn't mine. Oh, wait.....

    The car had enormous power and picked off cars at will. I can promise over 400 hp... The question is HOW much over?

    The brakes had great power. Too much, in fact, and had 0 feel due to the stock master cylinder. We will be swapping it out for a bigger unit. We also need better tires to help haul us down. The tires were really the sore point of the car, since they just didn't have much grip. The tires we choose for One Lap will be much, much stickier (likely Dunlop Star Specs).

    The car handled quite well in balance, and by the end of the weekend, I was able to roll into the power pretty hard from the apex (rather than waiting until I was almost straight). Peak power in 3rd gear would ONLY be tolerated under perfectly dry, warm conditions while going STRAIGHT. It was challenging to find the point that I could roll into full throttle and not hit peak power before track-out. It was one of those challenges that is really fun if it doesn't kill you

    Overall, I am hugely impressed by the car. We identified several small issues to work on and have developed a strategy to improve the handling and be able to put more power down. I'm really hoping that we get a chance to test before the One Lap on the tires that we'll run in it. I'm sure neither of us want to be screwing with suspension settings through the event.

    Comments from passengers who rode with me were rather short and simple. No one could really talk much. They were mostly in the form of "OMG this is absolutely rediculous". I personally haven't driven a car that has made me giggle this much. I've driven fun cars, but not one that has made me burst out into a 20 second long giggle. It instills Permagrin The rate at which we'd suck in and pass cars was rediculous. There was this poor E46 M3 (with mods) who was on R-Comps. He was quick in the turns, so I let him go so he could have his fun. As he was passing me (I was off throttle), I gunned it and jumped ahead, then fell back, then gunned it and jumped ahead again, just to play with him. He was flat to the floor the whole way, and I could just toy with him!

    The powerband on the car is sweet. It builds power very progressively all the way to the redline. It flattens a touch after 6800 rpm, but I constanly pulled to 7k. I guess I'll have to post some video soon

    Was it mean that I scared the car owner?
    Last edited by Z3SpdDmn; 10-26-2009 at 01:46 PM.
    -Anthony Magagnoli
    #80 BMW M235i Racing - Pirelli World Challenge TC - 2017 Rookie of the Year
    Rooster Hall Racing / FCP Euro
    '87 BMW SpecE30 #007 - 2012 NASA SpecE30 NATIONAL CHAMPION
    '08 BMW "130i" 6MT, '01 Z3 3.0i Coupe 5MT
    '88 Pontiac Fiero GT 5MT (my childhood dream car!)
    Send Your Teens to Street Survival

    Drive Faster Now

  24. #299
    Join Date
    May 2006
    Location
    Suffolk, VA
    Posts
    1,969
    My Cars
    99 Mcoupe|12 X5D|11 335D
    Sounds like a blast. And the Direzza Star Specs are a great tire. I recently put them on my e36, and they're very sticky, I highly suggest them.

  25. #300
    Join Date
    Jul 2006
    Location
    Florence, KY, USA
    Posts
    713
    My Cars
    90 325is,89 325i24v
    Yeah Anthony you meany! Honestly though folks... Anthony "the Ringer" did an absolutely AMAZING job! No ASR, no Traction control, No ABS... Just balls! Brought the car home in one piece! All the while clicking off times maybe 4 seconds slower than the fastest race cars there on crappy z rated summer tires. AMAZING! Can't say enough about my boy!

    And yeah! Edit and post up the videos!!!!

    Dreams To Reality Performance One Lap of America 2010 GT2SB winner, 4th Overall, car build http://forums.bimmerforums.com/forum/showthread.php?t=1268384

Page 12 of 21 FirstFirst ... 23456789101112131415161718192021 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •