Official APEX Wheels Showroom Gallery Thread

[rich8566]

What's the widest setup of ARC 8 wheels can I use for a square setup on my 2011 E90 335i with M-Sport can I use?

Sent from my iPhone using BF.com

[3MPowered]

What's the widest setup of ARC 8 wheels can I use for a square setup on my 2011 E90 335i with M-Sport can I use?

Sent from my iPhone using BF.com

Willtheyfit.com
It's your best friend.
find your current wheel's specs and compare what you're after. I wouldn t go too wide in the front or you'll lose all steering feel.

[chucho1026]

18x9.5 et35, 245/35 square,

they are also for sale, brand new, mounted only

Aaron

I'm interested send me an email to chuchomanee@gmail.com if the wheels are still available.

[Phil G]

18x9.5 et 35, 12mm spacer in the front,5mm spacer in the back with 245/35 hankook v12.

[sammycm3]

I want to put the concavity ARC-8s on my E36 M3 coupe 18s by 9.5 square. How difficult will it be to make the 9.5 width fit the front and back? I know there is some fender rolling and pulling but how much? I just don't want my fenders to look ghetto and ugly because they were rolled and pulled so much.

[jdauria]

I want to put the concavity ARC-8s on my E36 M3 coupe 18s by 9.5 square. How difficult will it be to make the 9.5 width fit the front and back? I know there is some fender rolling and pulling but how much? I just don't want my fenders to look ghetto and ugly because they were rolled and pulled so much.

A lot depends on your suspension setup as well, not just rolling the fenders

[sammycm3]

I am planning to go with ground control full coilover set up street/touring package as well. My current coilovers are shot....

[Ape]

Hmm.. I don't think I'v posted in here..

This thread makes me what to put these back on.

[ahardm3]

I want to put the concavity ARC-8s on my E36 M3 coupe 18s by 9.5 square. How difficult will it be to make the 9.5 width fit the front and back? I know there is some fender rolling and pulling but how much? I just don't want my fenders to look ghetto and ugly because they were rolled and pulled so much.

Well try our flares here is a pic with the same wheel setup

[mpr3ssiv]

Hmm.. I don't think I'v posted in here..

This thread makes me what to put these back on.

very nice! wheels specs?

[Ape]

very nice! wheels specs?

Thanks man,

Wheels are 18x9.5 ET35

[sammycm3]

Did you have a lot of fender rolling and pulling modification done to make these wheels fit Ape?

Sent from my iPhone using BF.com

[Chigga]

Anyone has an Ti with the low offset version?

[doyle]

I want to put the concavity ARC-8s on my E36 M3 coupe 18s by 9.5 square. How difficult will it be to make the 9.5 width fit the front and back? I know there is some fender rolling and pulling but how much? I just don't want my fenders to look ghetto and ugly because they were rolled and pulled so much.

if you don't put the car on the floor and be sure to heat the paint above the fenders before rolling them you should have no problem squeezing out a little more clearance with a tire around 245-255/40r17, with about a 1/2" of gap (maybe 1/4") I have no problems with running my 9" kosei k1s with (245/40/17's and barely any rubbing at all except for huge bumps, relatively speaking with my ccw's, the ccw's are 17x9 with the same tires, toyo r888 245/40-17

18x9.5 et 35, 12mm spacer in the front,5mm spacer in the back with 245/35 hankook v12.

phil that car looks awesome, exactly what I'm aiming for with my Daytona '95, I can't wait to install my ltw front tray and pick up the Abrahams ltw spoiler once I get some money pulled together, I got your car saved now in my personal inspiration library haha, by the way what roll bar are you using? Is it a weld in or bolt in? I'm using a harness bar for my 4pts on my recaros, but now that the car is used less on the street, limited to weekends and mostly used for hpde and autox I'm not as worried about safety issues of an accident where I could hit my head without a helmet

[Eddy@ApexRaceParts]

Check out this photo from our last Wallpaper Wednesday:



It is our shop E90 M3 with ARC-8's in 18x10" ET25 square and 275/35/18 Hankook R-S3's. This is the ideal track setup for this platform and best of all, it's a direct fit! No spacers, camber, or fender rolling required; just plug and play!

[nike001]

This is me waiting for a concave ARC-8 set-up for non-m's

[gtsdwys]

[Frank@AchillesMotorsports]

Another happy Apex Dealer!

We've punished these wheels throughout the years and they are still rolling stong!


2013 NASA 25 Hours Of Thunderhill by achillesmotorsports, on Flickr


Nice Cold and Frosty one from this years 25 Hours of Thunderhill

2013 NASA 25 Hours Of Thunderhill - Ice Cold Apex ARC-8 by achillesmotorsports, on Flickr

[TigerJohnny1974]

j/k
the ARC-8 are nice Wheels

[RCL]

My e92! 18x8.5/9.5

[Phil G]

phil that car looks awesome, exactly what I'm aiming for with my Daytona '95, I can't wait to install my ltw front tray and pick up the Abrahams ltw spoiler once I get some money pulled together, I got your car saved now in my personal inspiration library haha, by the way what roll bar are you using? Is it a weld in or bolt in? I'm using a harness bar for my 4pts on my recaros, but now that the car is used less on the street, limited to weekends and mostly used for hpde and autox I'm not as worried about safety issues of an accident where I could hit my head without a helmet

Sorry for the late reply, I just saw it! Thanks for those nice words, I appreciate it
My roll bar is custom made by Kirk. It's a 4points bolt in.Hope it can help, cant wait to see your daytona once its done!

[Spec3HOR]

Another happy Apex Dealer!

We've punished these wheels throughout the years and they are still rolling stong!


2013 NASA 25 Hours Of Thunderhill by achillesmotorsports, on Flickr

May I ask what rear flares you used for that?

[Geoff.T]

Here is a terrible pic of my new track setup: 18x10"square, 275/35r18s all around. 20mm spacers in front to clear the coilovers.

[puma1824]

18x9.5 et 35, 12mm spacer in the front,5mm spacer in the back with 245/35 hankook v12.

Nice! What color are these rims? Are they the Race Silver, Hyper Silver, or Anthracite?

[Eddy@ApexRaceParts]

Some great looking cars being posted in here. Thank you for sharing your photos.