FS: M50TU M52 bare cylinder head

[NickG]

For Sale: one M50TU / M52 bare aluminum cylinder head. The head has been pressure tested for cracks (passed) and was resurfaced flat to remove any imperfections (.005" taken off). Perfect to replace that overheated/warped/cracked/damaged cylinder head. $400 plus shipping. Email me with any questions at nick@tech-nick.net

[D_ALPINE_M]

still available?

[NickG]

actually, that one was sold, but I may have another one coming in. How soon do you need one? Email me: nick@tech-nick.net

[D_ALPINE_M]

Sent email.

Thanks,
Jeff

[ClubSport332ti]

M50/S50/M52/S52 all heads are the same.

[Carrerax]

Clubsport, does that go for non vanos M50's? Is the head sacting the same?

[ClubSport332ti]

not sure on that one, but I assume all the bare heads are the same for all the motors in this line as BMW limited there production costs by only changing very little stuff. Internals should be different but i really dowbt the bare heafs are different

[ClubSport332ti]

not sure on that one, but I assume all the bare heads are the same for all the motors in this line as BMW limited there production costs by only changing very little stuff. Internals should be different but i really doubt the bare heafs are different

[D_ALPINE_M]

So in other words will a 325 bare head fit an m3 or no?

[NickG]

Originally posted by JAYSWHITESEDAN
So in other words will a 325 bare head fit an m3 or no?

yes, as long as the 325 had vanos (93+, designated as M50TU).

[binh]

Hey nick, totally off topic but would you have teh base plate for the tensioner pulley for an e36 m3?

the one all the way to the right:

[NickG]

Originally posted by binh
Hey nick, totally off topic but would you have teh base plate for the tensioner pulley for an e36 m3?

the one all the way to the right:

nope.