Project Wannabe M3
shit, I need you to teach me your ways, if your willing too, Feb 24th. cant waitOriginally Posted by Team Neverlift
its a nice unit. cant believe how cheap they are compared to others like zion ones.
and mishi is out of the question for me.
Stubborn Approach Racing
Make sure to pre grid in my lead/follow group for the 1st session, and come see me after that at any point in the day.
Brake ducting and door pulls ordered, also put my hat in the ring for a 0 mile 3 clutch LSD that should be made available after the 1st of the year.
Project Wannabe M3
Sounds good, let me know when you'll have the backing plates for sale, I'm willing to help remove them, I like wrenching on cars if you ever need a helping hand
Stubborn Approach Racing
They are held on with (3) 10mm bolts each iirc, should only take 10 minutes to get them off, and 9 of that is jacking the car up and taking the wheels off. No biggie. I might even pull them off when I finally unload the car, lol.
I am pretty lazy when it comes to wrenching these days, so I definitely appreciate the gesture.
Last edited by Team Neverlift; 12-18-2017 at 02:49 PM. Reason: lulz
Stubborn Approach Racing
I apologize for the lighting, but located some Titan mirrors, wont have to worry about painting the ones I have now....
Member
New belt tensioner (was about to explode) and a used tonneau cover motor that I found on ebay for $100. Works great and finally the full auto top lives again. Although I do still need to do the bungee cord fix so it folds properly and stops barely hitting the cover on the way down.
Member
Niiiice, thinking about entering the dark side and going for an M front bumper...I apologize for the lighting, but located some Titan mirrors, wont have to worry about painting the ones I have now....
Stubborn Approach Racing
You will have the ability to raise your ride height soon, so your m3 bumper isnt hitting everything.
Member
I know where a Titansilber M3 front bumper is.
The problem is, it comes with a 328i rolling chassis for a $650 asking price.
Member
This is true! But im building a drift car so having a bumper scraping on everything is part of the funYou will have the ability to raise your ride height soon, so your m3 bumper isnt hitting everything.
Buy the Roller and send me the Bumper!
Member
If I bought the roller you could get your own bumper lol.This is true! But im building a drift car so having a bumper scraping on everything is part of the fun
Buy the Roller and send me the Bumper!
Member
It's a 323 my mistake. It's actually a pretty nice chassis, no motor or trans but it has glass projectors and a really good body. The dash is in great shape but the seats are roached.
Sent from my SM-G955U using Tapatalk
Member
haha yeah i was being smart. Not sure if the paying for the bumper + Shipping from GA to CA would be worth it for me. I will just have to wait for a rear-ended Cosmos to pop up.
Project Wannabe M3
wanna sell me your old mirrors?I apologize for the lighting, but located some Titan mirrors, wont have to worry about painting the ones I have now....
Member
No, only worth buying stuff local. Being near Atlanta there are tons of BMW's and parts in the surrounding areas
I need to pick up a M3 rear bumper myself, it's the only piece I'm missing. I know where one is but it's a little far out.
Project Wannabe M3
like that poor Dakar yellow m3 on FB... that's my biggest fear when racing are the dumb asses around me. lol
- - - Updated - - -
you should see if your parts guy has a 3.38 m3 lsd he wants to sell then you can ship it to me
Member
I'm sure he either has one or could find one. Local pickup only... It would only cost you probably $450 in gas.like that poor Dakar yellow m3 on FB... that's my biggest fear when racing are the dumb asses around me. lol
- - - Updated - - -
you should see if your parts guy has a 3.38 m3 lsd he wants to sell then you can ship it to me
Member
like that poor Dakar yellow m3 on FB... that's my biggest fear when racing are the dumb asses around me. lol
- - - Updated - - -
you should see if your parts guy has a 3.38 m3 lsd he wants to sell then you can ship it to me
That is so sadSo many people already all over that ad so i will just wait.
Funny, as i am looking to trade my 3.15 LSD for an open so i can weld it. Would you be interested? Is yours the stock 2.93?
Project Wannabe M3
yessir stock 2.93 I just put fresh redline fluid in it. I would just need to swap the covers as I have revshift bushings.That is so sad
Funny, as i am looking to trade my 3.15 LSD for an open so i can weld it. Would you be interested? Is yours the stock 2.93?
you can pm me on FB and we can work out the deets
Last edited by Ajaxx1989; 12-19-2017 at 08:54 PM.
Member
One of the local M3 partout ads.
Sent from my SM-G955U using Tapatalk
Project Wannabe M3
if I'm gonna buy a diff, I want a 3.38, but I will trade my non lsd for a lsd anyday lol
Member
To be clear, i am interested in trading w/ cash on top (on your end), 200?
Should i still PM you on FB?
Also recently serviced and refinished , its a 6 bolt so you'd have to check yours.
Member
If I was 30 years younger and closer I'd buy that and swap my 328 drivetrain in, mine has a case of tinworm from too much time in the rust belt.It's a 323 my mistake. It's actually a pretty nice chassis, no motor or trans but it has glass projectors and a really good body. The dash is in great shape but the seats are roached.
Sent from my SM-G955U using Tapatalk
Gave away my BMWs, driving a VW and an Audi now.
Member
Drove home from work in some nasty snow and ice, boy do dedicated winter tires make a difference
Sent from my SM-G955U using Tapatalk
Member
Lugbolt broke... I really hate Les Schwab.
Posting Permissions
Reply With Quote
Bookmarks