I laughed at it.
Then slapped in some fog light deletes.
Oh and I went drifting on some dirt backroads. I like the new look.
Replaced rear trailing arm bushing with 6 inch hack saw, screw driver, hammer, some nuts bolts and washers......pain in the A$$!!!!!!!! Put in the Rogue Engeneering bushings. Man what a difference!
bottomed out
Changed all belts and flushed out the power steering fluid.
BJ
Swapped in a diff (3.15LSD)
I ummm bought it
I went over it with the Cali duster.
oil change and new front bumper molding
Tooke halo lights out.
blinker mod.
hopefully tomorrow getting M3 bumper and/or fog light deletes
Converted my Cosmos M3's interior from Dove to black, I'll be posting a whole thread soon. . . here's the sneak peak
http://www.flickr.com/photos/christi...7618891110061/
E82
Looks good Filler.
Did you get the seats recovered?
If not how much for the Dove seats?
oil change, new plugs, wash, detail, wax, now on to my wife's 5 errrr
Recharged the A/C.
'14 Evora S - Chrome Orange/Ebony
'02 M5 - Carbon Black/Silverstone
'15 M235i xDrive - Mineral Grey/Black
I was missing a Radiator mount bushing, so I replaced both of them. Those mounts are a PITA until you figure them out, then they are stupid easy. $2.50 from the stealer for both.
I painted my DDM M3 bumper last night, so I am sanding the crap out of it today. Granted, I am not experienced with a paint gun, but this was a really cheap turd that came with a Husky air compressor, but I am a whiz with a rattle can. I blame me 25% and the gun 75%. About half way through it just started spitting out tons of paint in globs. Live and learn, if I am going to do it again, I am going to buy a decent gun.
Oh yeah, and I took the glass off my drivers side mirror since the ebay seller I bought the new glass from decided to "upgrade" me to wide angle glass. Could not get used to it on the drivers side. The new glass looks great on the passenger side though.
And I am debating buying a set of Tein springs to lower my new 328i just an inch or so.
Last edited by Gross328i; 05-30-2009 at 02:01 PM.
^did you have a in line filter, if not you were getting condensation water from your compressor through your gun.
New ICV hose. Deleted fuel breather vacuum hose.
M50 3.1L Stroker - TC Kline D/A
New pads all around, balaced tires, rad hoses, oil change and spark plugs
My Previous Vehicle - In the Edmonton/Northern AB Area? We're having a meet... Click Here
Bought 3 more 15 spoke wheels(standard on late 90's vert) for $100(one had a new tire on it), giving me a total of 10. Glued a not-so-bad-looking hood emblem on the gold one. Picked up some bolts for a future rear suspension swap on the blue one.
Replaced the Comfort Relay.
Bookmarks