i have 18x8.5" wheels on the back of my 1995 m3.
i have a BONE STOCK suspension setup, i am NOT lowered at all.
will i rub with 265/35/18 tires on the rear?
1995 hellrot red ///M3: 06.25.04 sold! =(
texas longhorns
What's the offset on the wheels?
ill go check the offset on the wheels.
however b/c i am on stock suspensnion, i am NOT tucking at all.
if i am NOT tucking, it's impossible for my to rub right?
1995 hellrot red ///M3: 06.25.04 sold! =(
texas longhorns
You can rub on the inside... Depending on your camber, thrust angle, and the rim offset.
it all depends man....on the car, the offset, the tire (bridgestones run wide), the suspension (softer suspension will travel more), camber, etc...but yeah probably.
18x8.5 all around u should run 235's all around.
You should have a wider rim to run the 265s. I think most tire MFGs recommend 255s as the widest fitment on a 18x8.5" rim. FWIW, I run 255/35s on my Hartges (18x8.5).
Nick
1998 M3 Estoril • 2000 323it TiAg sport 5 spd
That will be a no go. Add passengers back there and you will be all over your fenders. Not pretty. 265s take a lot of work to fit....besides that is a little too big of a tire for an 8.5" rim.
Go with the 255.35.18, you will never be able to tell the difference in width, and you won't have near the rubbing issues (although you will still probably have to roll your fenders)
Rob Birkhead | Principal
okay thanks for the replies guys. i ended up going with 255/40/18 michelin pilot sports.
im about to go to the tire place to have 'em mounted!
1995 hellrot red ///M3: 06.25.04 sold! =(
texas longhorns
I hope you mean 255/35/18...If you have 40s...your in for some fun...
Engine & Driveline: ICS Stage 4 SC * 8 Rib * 15+psi * xx# injectors * Schrick Cams * Larger HFM * Port & Polished Head * 3 Angle Valve Job * VAC MLS .140 HG * E36TD Fan Setup * Shorty Headers * Track Pipe * UUC UDPs * S54 Oil Cooler * OEM S54 Radiator * S54 Guibo * Stromung Exhaust * ACS Delete * UUC SSK * Rouge WSR * UUC TME
Chasis Tuning: GC COs * UUC Sways * X-Brace * Rouge RSM * GC RTAB * AA DSB * Z3 Steering Rack * BBS RC 18x8.5 ET38/ 255/35/18s @ all 4* Front Strut Brace * RaceLogic * 3.38 LSD
Exterior: DEEP BLACK PAINT * Rolled Fenders * Custom Vented Hood * RD Diffuser * Red DDEs * 8,000K HIDs * Smoked Markers
Coming Soon: Finish ICE * 6-sp Trans * 6 Pot 13.6 Fr, 4 Pot 12.9 Rr BBK
4 Sale: M3 S52 Cams * M3 Rear Seats * 99 M3 Fan&Clutch, Intake Manifold, Headers * Alum Therm Housing * 42# Injectors * Dresmann Rear Kit * Tilton/ICS Flywheel & Clutch * LED, Smoked & OEM Taillights * & More
Wheels & Tires: Custom 18x8.5 BBS RCs * 3 17x8 Grey OZ Superleggeras * RD RGS 17x8
Ive got 255/35/18 in rears on 9" wheel, stock suspension with no problems.
--Jeff
255/40 is the wrong size. WAY too tall.
:sun
:
With 235/40-18's on my 18 x 8.5" CH's, I had to, ahem, encourage my inner fender lip a little for clearance. Keep in mind that the offset on these is a little funky at 35mm...
Hopefully Rasta Mon is right and that you didn't go with the 40's....
Bookmarks