just replaced my transmission mounts in my 2003 540/6 with 115k miles. Somewhat of a waste as neither mount had any tears/rips/cracks. Visually the new replacements (Lemforders) werent as compressed as the old originals, but that's common when comparing new mounts to old. And within a short amount of time,the new ones will compress downward a bit as that's normal.
Zero difference in anything since the replacement.
I suggest inspecting (easy) the transmission mounts before blindly changing. May be wasting money
Motor mounts were replaced over a year ago. One of those was definitely torn/leaking.
Nice writeup - does anybody still have the pics?
Good morning! The photos are stuck in Photobucket which changed their photo sharing policies. I’m not positioned for $500 a year for photo sharing. 🤪
I have to move a couple of thousand pictures and recover/repost. Just need time to move them over. The fun will be trying to recall which picture went to which post over my various DIY posts.
I’ll see what I can recover over the next month. Lotsa posts in lotsa forums...
Sent from my iPhone using Tapatalk
Last edited by BlackBMWs; 11-22-2017 at 10:09 AM.
1999 540it - Schwartz II/Sand Beige, style 5 rims, Conti DWS 235/45 tires, Billy HD/Sports, Stoptech S/S BL, F1 Pinacle 35% tint, Zionsville Cooling kit
1998 318ti Cali Sport - Schwartz II/Schwartz Anthratz, staggered style 23
1997 318ti Sport - Schwartz II/Schwartz Anthratz, staggered style 68 ,
1995 318ti Active - Alpineweib III/Schwartz, squared style 32
1994 325i - Bostongrau/Tan, Billy Sports, H&R springs
1991 318ic - Schwarz/Anthratz Stoff, Bilstien HD, Z4 3.0 SS, Magnaflow, S/S Stress bar, x-brace, M20 FW, Elipsoid/HID, K&N
BMWCCA# 160411
1995 318ti Sport Schwartz II/Schwartz Anthratz - Sold
1985 635CSI - Schwartz\Sand - Sold
1984 533i "Max" - Schwarz/Schwarz, - Sold
1984 318i - Champagne/Tan, Stock - Sold
All good, probably no need to do all that since it's written up pretty well. I'm gonna start this project today...
The bentley manual is worthless for this job, can't find any mention on motor mounts whatsoever!
***** EDIT *****
Do you guys replace the motor mount nuts as well? I want to reuse old ones....
Last edited by fullthrottle540; 11-24-2017 at 01:15 PM.
I reused all the old nuts.
Front mount replacement info....
You may have to remove the clutch fan, depends on how high you need to jack the motor up, I've got an electric fan so I didn't need to.
Remove the top nuts first, then jack the car up, remove the lower engine cover, then 2 nuts on the bottom of the mounts.
If you have the engine up high enough the mounts will come right out.
Last edited by JimLev; 11-26-2017 at 07:48 AM.
How were the tranny mounts? They typically all fail together...
Sent from my iPhone using Tapatalk
1999 540it - Schwartz II/Sand Beige, style 5 rims, Conti DWS 235/45 tires, Billy HD/Sports, Stoptech S/S BL, F1 Pinacle 35% tint, Zionsville Cooling kit
1998 318ti Cali Sport - Schwartz II/Schwartz Anthratz, staggered style 23
1997 318ti Sport - Schwartz II/Schwartz Anthratz, staggered style 68 ,
1995 318ti Active - Alpineweib III/Schwartz, squared style 32
1994 325i - Bostongrau/Tan, Billy Sports, H&R springs
1991 318ic - Schwarz/Anthratz Stoff, Bilstien HD, Z4 3.0 SS, Magnaflow, S/S Stress bar, x-brace, M20 FW, Elipsoid/HID, K&N
BMWCCA# 160411
1995 318ti Sport Schwartz II/Schwartz Anthratz - Sold
1985 635CSI - Schwartz\Sand - Sold
1984 533i "Max" - Schwarz/Schwarz, - Sold
1984 318i - Champagne/Tan, Stock - Sold
Reviving an old thread. E38 M62TU44 - left engine support snapped. I was going to change mounts anyway, but anyone changed left support?
Bookmarks