u owe my mule an apology
now thats more like it!
86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
best time 9.06 @ 151.8 mph, best 60 foot 1.30
#1 o-ring fan
That'll cure the boredom below 4000 rpm in the morning holy f---!
Where have I been? Astral projecting.
Originally Posted by jszy25
Member
Turbo V8 in an e36 chassis.
When is the expected completion date?
Fast lookin' but slow movin'
237 rwhp N/A power
Surfs up
Duuuuuuuude... noice!
senior LOUNGE creator
This is nuts.
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
License Revoked
Nice setup how is that f1 Clutch setup working out for you? I Have the stage 3 kit with the flywheel. I'm going Trm stg 2 and hoping that the F1 kit will hold up.
Member
There's an easier way to remove that asphalt mat sound deadening; an air chisel, really??
A little bit of heat from my Milwaukee heat gun, and it lifts right off. Spray some carb cleaner (or use lacquer thiiner) and the residue wipes right off. I do this all the time...
Oh, and cool build; BMW + sbc + turbo = big fun!
Surfs up
Git rid of the radiator. It's in the way
#1 o-ring fan
Seems as if there is a lot of room on either side of the frame rails in front for a single on one side or smaller twins (one on each side). It will be interesting how you have the turbo in front of the rad and if the exhaust heat will effect cooling temps. I'd personally put the turbo to the side and away from that rad. That way you could even toss in A/C.
Otherwise...sick setup!
Where have I been? Astral projecting.
Member
As for the air chisel, sometimes it is just a grab the closest tool and do work kind of day! Heat gun, dry ice.. lot's of different ways to go about it!
That is not where the turbo is going to sit! Plenty more fabrication to come!
Last edited by dmb882; 01-19-2020 at 10:52 PM.
11.75 @ 131 6262 2.8l TRM Tuning e36 m3 - 2011 http://dragtimes.com/BMW-M3-Timeslip-23541.html
Facebook.com/LUXFAB
senior LOUNGE creator
Sadness awaits in the spring
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Member
Love it. Need more pics!
"Believe nothing you hear, half of what you read"
Member
So you've changed everything again? lol
Need more pics, this car is awesome.
"Believe nothing you hear, half of what you read"
Surfs up
Turbo on the steering side? Why?
Member
bit more room and the exhaust is going to go out of the hood!
ßMW///MµrÐêr§þðr†
Illness
senior LOUNGE creator
Is this a part out thread
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Member
no its a feeler to take the chassis and all parts
if there is no interest, it will get a 5.0 swap and the other parts will be listed.
--
PNNS2631.jpeg
Last edited by dmb882; 01-11-2020 at 07:04 PM.
11.75 @ 131 6262 2.8l TRM Tuning e36 m3 - 2011 http://dragtimes.com/BMW-M3-Timeslip-23541.html
Posting Permissions
Reply With Quote
Bookmarks