Who has the whitest wheels...?
10.5's look like this:
'88 s54 e30, '00 m5
2001 E53 X5 - 5.3 Procharged, 4L80E RWD, Brembo, 20" alloy, EBC race, Forge, A2W intercooled, Alcantara interior, 3.62 LSD and more!
2005 E53 X5 - 6.0TT, 4L80E RWD, 20" alloy, EBC race, Forge, A2W intercooled, Alcantara interior, 3.62 LSD and more!
1996 E36 335ti - N54b30, A2W intercooled, ZF 6speed rwd, 4.10Lsd, Speedline magnesium rims, Brembo, S55 exhaust, 245/40/17-295/30/18, idrive, Forge, logic 7
1999 E36 360ti - 6.0, ls6 springs, ls6 cam, hardened pushrods, trunion, racing baffle, t56, ls7 clutch, m3 brakes, 4.10lsd
Ok, just making sure... this is, after all, a thread about wheel width, and you posted a pic improperly measuring the width of the wheel.
Wasnt improper based on its needs when it was taken.
2001 E53 X5 - 5.3 Procharged, 4L80E RWD, Brembo, 20" alloy, EBC race, Forge, A2W intercooled, Alcantara interior, 3.62 LSD and more!
2005 E53 X5 - 6.0TT, 4L80E RWD, 20" alloy, EBC race, Forge, A2W intercooled, Alcantara interior, 3.62 LSD and more!
1996 E36 335ti - N54b30, A2W intercooled, ZF 6speed rwd, 4.10Lsd, Speedline magnesium rims, Brembo, S55 exhaust, 245/40/17-295/30/18, idrive, Forge, logic 7
1999 E36 360ti - 6.0, ls6 springs, ls6 cam, hardened pushrods, trunion, racing baffle, t56, ls7 clutch, m3 brakes, 4.10lsd
Sigh....no more commenting from me.
2001 E53 X5 - 5.3 Procharged, 4L80E RWD, Brembo, 20" alloy, EBC race, Forge, A2W intercooled, Alcantara interior, 3.62 LSD and more!
2005 E53 X5 - 6.0TT, 4L80E RWD, 20" alloy, EBC race, Forge, A2W intercooled, Alcantara interior, 3.62 LSD and more!
1996 E36 335ti - N54b30, A2W intercooled, ZF 6speed rwd, 4.10Lsd, Speedline magnesium rims, Brembo, S55 exhaust, 245/40/17-295/30/18, idrive, Forge, logic 7
1999 E36 360ti - 6.0, ls6 springs, ls6 cam, hardened pushrods, trunion, racing baffle, t56, ls7 clutch, m3 brakes, 4.10lsd
If the deal goes through on a set of wheels I'm looking at, I'm going to attempt 17x10 on all 4 corners with 255's on each wheel.
Wish me luck
18x10 is a waste for only a 255. You'd be better off w/ 275's. A 9" wide wheel is ideal for 255's...
LOL, I just realized that he said 17x10. Oh well. Even so...
My new favorite thread!
So just so i have this right, 17X10 ET30 with 225-45-17's fit in the rear of an E36 without rolling the fenders? Is there any room for a wider tire? How low is this car and what is the offset and size of the front wheels and tires? Are you running anything outside of factory alignment settings? I really like the look of this car. Thanks!
Last edited by TyKBlue82; 01-30-2009 at 06:03 PM. Reason: Automerged Doublepost
Maybe no the widest wheels and rims but I wouldn't go any wider because as of now I think the rim is flush perfect and looks mean from the rear. 18 x 10 Ch with BF Gforce TA 255's et 40
Nutshell:
9.0:1 JE Pauter
GT35R TT Stage II @ 13
(68' Camaro, stolen)
(93' 5.0 stolen)
(95' E36 M Euro S50B32 Swap w/ Gruppe N ECU Totaled)
Hi Everybody
Widest I've seen on stock fenders were 10" wide ET40. And it wasn't with some gay tires, it had like 255s or something.
Current:
Alpine White E46 325i Touring S54 6MT
Titanium Silver E39 540i Touring M-Sport S62 6MT
Past:
Alpine White E46 330i ZHP Sedan S54 6MT
Interlagos Blue E85 Z4 M Roadster 6MT
Le Mans Blue E92 M3 6MT
Japan Red E46 325i Touring S54 6MT
Estoril Blue Individual E46 M3 Coupe 6MT
Cosmos Black E36 M3 Coupe S54 6MT
Alpine White E92 M3 6MT
Alpine White E90 M3 6MT
Laguna Seca Blue E46 M3 Coupe 6MT
Jet Black E36 325is S52 5MT
Lagoon Green E36 325is 5MT
Bookmarks