HMS
13751 Beach Blvd.
Westminster, CA 92683
P: 714.379.7770
Tell them I sent ya.
Hi Mami.
Hardparking Ricer club member #69
Hands down best place, US Wheel in El Cajon. Ask for Carlos, tell him Kim sent you.
Went from this:
To this:
For only $75/wheel (nogaro silver paint costs extra).
'94 325is #94 IP/GTS3 Mauritius Blue Metallic
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
Fastforwardwheels.com
Stay away from magmasters.
'94 325is #94 IP/GTS3 Mauritius Blue Metallic
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
I had a bad experience with U.s. wheels.They took way longer than they promised.They refused to remount my tires after promising to when i dropped them off.A huge headache for me.The work was pretty good though.I know Kim likes them a lot.
hello
'94 325is #94 IP/GTS3 Mauritius Blue Metallic
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
Yeah, go to US Wheels I just had them refinish one of my SSR's did a damn good job, and they finished on time (for me at least)
'94 325is #94 IP/GTS3 Mauritius Blue Metallic
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
I've used US wheel a few times for re-finishing and bends...good prices, not the best quality re-finish in the world but you pay for what you get. I will be taking my BBS RKII's to get re-done before I mount them.
M2CS 6-spd
the wheel zone in Chula Vista. Ask for Danny.
'94 325is #94 IP/GTS3 Mauritius Blue Metallic
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
Ben and I used US wheel and were both very happy with the work they did. Maybe he'll post the pics.
My E39 528iT as I bought it. You can't see, but all 4 wheels are bent to hell.
And after Carlos @ US Wheel did his magical things to them:
And Kellie's 325iX:
Before:
After:
Do they just paint or do they offer Powder Coat?
John
'95 Hellrot M3 w/Dove
AA Euro HFM Stage II (w/21# Injectors & Software) W/Gen III Exhaust - URI Crank Pully - FDM w/3 Row M Coupe Rad - 3.23 LSD - Vogtland Club Spec/Koni SA - UUC Red w/Enforcers - TMS Shims/Rear Camber Bars w/QA1 inners/Sways - VMC F/TMS R End Links - X-Brace - Perf Ultimate/SS Brake Lines - GC Tower Mounts/RTAB Shims - ZKW's w/5000K Hid - Fog Delete - Alpine 9847/Pioneer TS-C130R Kevlar Components/Pioneer PRS-X340/Stealth Box's/Wired Zune 120GB - OE LTW CF Sills/Glove Box Plate - Staggered Black M-Spoke II's w/235/40 (front), 255/40 (Rear) Nitto NT05's - Rolled Fenders!
***Got a '95 M3? (actually pretty common on all years! Even happened to Racer Seth Thomas! ) Check Your LSD! http://forums.bimmerforums.com/forum...d.php?t=390209
'94 325is #94 IP/GTS3 Mauritius Blue Metallic
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
Bookmarks