The car is in southern indiana hit pretty hard in the front end. The hood and fenders are toast as well as headlights grille and f bumper. The seats have been sold already. Its black on black. The motor obtained damage to the oil pan, alternator bracket and oil filter housing. The tranny is still good. The motor could also be used but the items detailed would have to be swapped out from the core motor...The trunk lid was also damaged. I would prefer local pickup on large items. Just let me know if you guys need anything...I may be able to help? Take Care...
Sorry I posted this in the wrong area could the mod please move this for me...Thank You...
Last edited by awd5sp; 10-10-2008 at 10:40 PM.
dibs on all black interior pieces! if you can have it all out by thursday, i'll pick it up then. PM me.
How is the wood trim? do you have all the pieces.
Mod list if curious: http://forums.bimmerforums.com/forum...2&postcount=50
How about a few pics of the car ???
2003 540i M-Sport - Sterling Grey/Black LeatherGPS | PP | Rear Shades | Intravee II | Valentine 1 | 35w ProLumen HID Fog Lights w/3000k bulbs | 35% Formula One Pinnacle Series Ceramic Tint | Eisenmann Race Exhaust 2 x 83mm | Eibach Rear Sway Bar | Weichers Front Strut Tower Brace | Racing Dynamics CAI | Stealthone | Sound by Focal/JL Audio/Arc Audio
DPE Wheels for Sale....
http://forums.bimmerforums.com/forum...5#post26952145
I'm looking for the vent piece behind the arm rest and the slot underneath it, might be a cupholder. PM me if youve got it in good shape
hey what about the interior? let me know. Also, i need the trunk ligt in the trunk lid, the one that comes on when you open the trunk.
Can I get the rails that run front to back on the left and right sides of the roof?
Also I'm assuming the car is jet black, not carbon black?
Thanks!
Current Bimmer: '89 E30 DD, '89 E30 ProjectFormer Bimmers: '09 E9 M3, '99 E39 540i, Dinan Stg. V | Dinan CAI, Dinan MAF, Dinan TB, Dinan S/W, Pre-VANOS "Dinan" intake manifold, Magnaflow exhaust, res. delete, M3 SSK| M5 3.15 LSD, Koni FSD w/Eibach Pro Kit, Eibach Sway bars, Powerflex bushings, Rogue tranny mounts, 18x9 ASA AR1's, 275 General Ex UHP's at each corner | M5 Brake system, Stoptech SS Lines, Axxis ULTs F&R, Stoptech Slotted rotors, ATE Super Blue...
I need A/C buttons temp. up and down, left and right sides.
Thanks,
SBD
the option to pm you isn't there. when i say all black interior pieces, i mean every piece you would need to do a full interior color change swap. Please pm me since i'm not able to pm you. Also didn't see if its a sport but if so id like the wheel.
need the 2 rear window regulators!!! Thanks mannn
E39 5er, bilstines/H&R springs, M-parallels staggered, smoked tails,'02 bumpers, painted mouldings.
I guess newbys can't post pics here? I have a few but my camera was full so I couldnt shoot everything..if you get me your email address I can shoot you a pic of the car..
I do have the rear regulators at this time...
The interior wood trim is all good expect one small crack on the piece to the left of the driver between the door and the steering wheel.
The top pieces on the roof are all good and it is jet black...
I have the complete black interior change over minus the seats. The driverside door panel has a small issue with the coin holder apparently someone at the yard wanted the change and didnt know how to open it so the spring is muffed up a little. I have not attempted to repair it though.
The plastic directly above the license plate is damaged where the trunk was hit...
I forgot to look under the rear cup holder but I will be back over there at my first chance, sorry
This is my email euromotorwerks@verizon.net I cant get the pms to work either?
Airbag on driverside is blown...so wheel is no good unless you have bag?
Last edited by awd5sp; 10-11-2008 at 02:02 PM.
dibs on teh arm rest it self as long is it didnt come with a bulit in phone!!!
UNDER CONSTRUCTION
- 2000 528i Sport -
Got any questions about my car? Feel free to PM me!
I'm the owner of the car but I don't have the vin with me as I'm out right now...
Simple request. The interior door handle wells.. they're held in by one screw. This screw is covered by a small piece of black plastic. I need two of those small plastic screw covers. If they're not included with the stuff knux11 wants I'll take 'em.
Bookmarks