Observer/Master Skeptic
Moderator
Sounds like the EWS is not aligned. See this thread.
http://forums.bimmerforums.com/forum...d.php?t=943436
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd FS
88M3 AW 43k miles Project
WTB: 3.5" Eurosport/Conforti CAI
end user of fossil fuels
Agree with Maui. Need to take it in to get it aligned
It's not speed that kills, it's the speed difference that does. Obviously you aren't going fast enough.
Turning Benjamins into noise since 1997
I read a list of the 100 things you MUST do before you die. Funny, "Yelling 'HELP'" didn't make the list!
Member
M3 Euro LTW --------> thanks for the wiring diagram..................
gobuffs and MauiM3Mania the EWS is aligned... what are i missing is the 3.2 wiring harnes to start up and finish the conversion. if anyone knows where I can get the wiring harnes let me now please!!
Last edited by joan667; 03-21-2011 at 11:39 PM.
Member
to finish the euro conversion i need the euro 3.2 wiring harnes LHD, if anyone knows please let me know....I have a 1 year trying to start and nothing. PLZ HELP ME
end user of fossil fuels
German eBay, German junkyards, BMW dealer
It's not speed that kills, it's the speed difference that does. Obviously you aren't going fast enough.
Turning Benjamins into noise since 1997
I read a list of the 100 things you MUST do before you die. Funny, "Yelling 'HELP'" didn't make the list!
Member
BMW E36 M3 Expert
Good luck trying to find a used LHD harness.. fewer out there than RHD, and they usually stay with the motors!
'99 Estoril Blue + Dove Grey ///M3 coupe
'04 Jet Black + Cinnamon ///M3 coupe
Member
Hi all, I am about to place an s50b32 into my 1993 e36 325i euro coupe. Apart from wiring in the ews, will I have any major problems??
Member
my m coupe is 2000 us and the s50b32 is z3m roadster 2000 the same year
i remove the EWS and still dosent start up but i have the wiring harness us version i need to change the pin of the harness
to make the wiring harness from us version to europe version
Last edited by joan667; 08-14-2011 at 11:58 PM. Reason: Automerged Doublepost
Observer/Master Skeptic
Moderator
Was the EWS removed or was it disabled?Originally Posted by joan667
Although I still think the problem is the EWS, you should review the appropriate ETMs of both the chassis and engine for pin placement as discussed on the first page of this thread.but i have the wiring harness us version i need to change the pin of the harness to make the wiring harness from us version to europe version
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd FS
88M3 AW 43k miles Project
WTB: 3.5" Eurosport/Conforti CAI
Member
Hi guys, I'm wondering if anybody has a ETM for a 94 3.0L LHD car? I can't find the ETM using google
My E30 swapper runs well, but i'm trying to figure out which coolant temp sensor is used for the cluster, and which one is used for the DME.
Member
Update in this thread.Hi guys, I'm wondering if anybody has a ETM for a 94 3.0L LHD car? I can't find the ETM using google
My E30 swapper runs well, but i'm trying to figure out which coolant temp sensor is used for the cluster, and which one is used for the DME.
Sent from my SM-G960U1 using Tapatalk
Posting Permissions
Reply With Quote
Bookmarks