The friendly dealer does not sell them as single items, but only the much more expensive door handles complete. The cheaper solution: ONE set of rubber trim for your outer door handle, 1 set = 4 pieces.
These will crack or, over time, it will just wear out. The last thing you want creeping inside your door handle is water & dirt. They are no longer soft.
It will fit all E32 - 7 series, E34 - 5 series, E36 - 3 series and the Z3 series.
Price: U.S. $ 30.00 per set including shipping by airmail, non-registered, non-trackable ex Japan. In case registered airmail is prefered, plus $5.00. 2 door set $ 18 shipped by airmail, non registered. For registered mail add $5. Delivery time: ex stock
Payment: Paypal.Should the parcel be subjected to import, customs, GST, VAT or sales tax, you are responsible to pay them. Send me a private message in case of interest with your complete shipping address and I will inform the Paypal account.
Installation: (examples)
http://workshop-manuals.com/bmw/3_se...left_or_right/
http://infinitier.ddo.jp/e32/page/ma...inte_50702.htm
1 comment for quality/fitting comparison vs the auction house stuff, more by users in the thread: Just want to let everyone know that Shogun's a great guy to work with. These are the best gaskets on the market. Don't buy the ones from eBay. They're plastic and don't fit properly. I spent an hour try to make them work and threw them out. The one Shogun sells are rubber and install literally in minutes. Thanks Shogun for a great product!
Here another good instruction for installation http://dd.jpn.org/BMW_HP/20060508/index.shtml
instructions for the E36 Coupe http://forums.bimmerforums.com/forum...4&postcount=12
Last edited by shogun; 04-13-2020 at 10:33 PM. Reason: update
Shogun tricks and tips for the E32 series are HERE!
Ok Guys.. I received the gaskets.. they look good. I'm decently mechanically inclined and I cannot figure out how to get this 'slider' off. Where the heck is it? I thought I found it but gave it a few knocks without any luck..
Any help?
look here http://www.bimmerboard.com/members/davidc/IMG_3531.JPG http://www.bimmerboard.com/members/davidc/IMG_3532.JPG Take a small, flat-blade screwdriver and pry open the inner cover on the side of the door.
http://www.bimmerboard.com/members/davidc/IMG_3533.JPG Then remove the outer ring. http://www.bimmerboard.com/members/davidc/IMG_3535.JPG Here you can see the end of the metal clip inside the door that holds the handle in place. Stick the tip of your screwdriver in there and push toward the front of the car (approximately 1" is all it takes). http://www.bimmerboard.com/members/davidc/IMG_3541.JPG http://www.bimmerboard.com/members/davidc/IMG_3543.JPG
The door handle can now be pulled away from the door. The rubber gasket just peels off of the back of the handle.
http://www.bimmerboard.com/members/davidc/IMG_3544.JPG The old gasket (top) and the new gasket (below). Reverse the steps to install the new rubber seals. A small L-shaped hex wrench or a box-end wrench work well to pull the metal clip back into place inside the door.
E36 they should be under a cover http://forums.bimmerforums.com/forum...4&postcount=12 http://forums.bimmerforums.com/forum...5&postcount=11
Last edited by shogun; 04-13-2020 at 10:40 PM.
Shogun tricks and tips for the E32 series are HERE!
I did mine yesterday. Look through the hole and find the small sheet metal piece in there. Put the paint can opener at the top and just off the edge of this. Push towards the outside of the door and forward. Move down a little each time and try again. You will hit it. It isn't visible in my 328ic. Took me 31 days for the drivers side and 3 minutes for the passenger side. When mine released you could see the outside panel release from the door.
Bought these on the 25th of December, Received them on January 4th! Awesome deal and a+ quality!
"...there’s nothing like the scream of an old straight six, a sound only comparable to a monster that eats children and rocks for breakfast and howls like a banshee when the loud-pedal is mashed." - Mike Burroughs
My door handle gaskets arrived today for my 1990 735i. Installation was very easy and they look great. And as a bonus, I now have some cool Japanese postage for my stamp collection.
Hey guys I my shipment for gaskets went out Feb 19th and I just got them last night (March 9th). So just be patient guys they WILL come it just takes awhile coming from overseas! The gaskets are great quality I'll be putting them on today!
Hi Shogun,
The gaskets arrived today . 8 days from Japan to Germany.
Thanks a lot, as soon as the weather here begins to cooperate and move above freezing I'll install them.
Here a video how to do on the E36, made by jbate and his comment:
This video will give you an idea of what you have to do while the handle is still in the door. First you need to pull the rubber cover back. I have seen a DIY where the guy used a paint gallon lid opener, I used a set of picks. The whole thing is done by feel because you can't see a damn thing.
http://www.youtube.com/watch?v=gGE7n...layer_embedded
Last edited by shogun; 04-04-2013 at 12:19 AM.
Shogun tricks and tips for the E32 series are HERE!
Thanks, Shogun!!
They arrived yesterday. I'm looking forward to installing them this week.
Lightning fast shipping and personable service to boot - most grateful!
d.
Thanks for great product, superior guidance, and delightful communication!
Installation completed with ease.
Thanks!! Got em today! Super fast shipping you rock bro!
Installed them yesterday, very easy, and looks great! Thanks Erich!
Received rubbers in perfect condition....thanks Shogun
Thanks for the gaskets!
Just want to let everyone know that Shogun's a great guy to work with. These are the best gaskets on the market. Don't buy the ones from eBay. They're plastic and don't fit properly. I spent an hour try to make them work and threw them out. The one Shogun sells are rubber and install literally in minutes.
Thanks Shogun for a great product!
Sent from my iPhone using BF.com
Shogun's the man. Buy dem gaskets. Extremely easy to fix!
Just wanted to report back that the gaskets arrived, according to my wife. I'm traveling until Memorial Day, but over video chat my wife showed me what showed up. They look perfect and I see others saying install is a breeze.
Many thanks to Shogun. Can't wait to install these in a week and a half when I get home.
Just got mine today, didn't take more than 20 minutes to do all four, even with some pretty thorough cleaning of both parts of the handle and the body underneath.
Many thanks to shogun, he had already shipped them out within a few hours of receiving payment, and they really are excellent quality -- perfect fitment. Definitely recommended over the cracked and now-useless gaskets so many of us probably have.
EDIT: As far as shipping goes, I sent him payment the evening of May 11 my time (morning of May 12 in Japan), and they were delivered today (May 18)....Japan to metro Atlanta GA in under 7 full days.
Last edited by Ars3nic; 05-18-2012 at 10:03 PM.
Wow quick shipping, got my set today, will install tomorrow..
Thanks
Awesome fit Shogun. First took some time to actually see the locking bar but the other 3 took a few minutes each!
Was going to take a picture of the old but there were none! All disintegrated with only minor bits still hanging on. Makes door closure no longer rattly sounds good.
Thanks
Now onto the lights issue .......... :/
1990 735il
I already ordered gaskets from ebay, what a mistake.
Trying to install them only caused me frustration. The build quality and precision is terrible, its so bad that I considered running car without handle gaskets at all. Its like you are trying to fit gaskets from some other car..
After finally installing them, they dont look very good, too much space around. I ll leave them on for now.
I ll buy these ones next time. I hope they are better quality and preferably made in japan.
Conclussion - Never buy ebay handle gaskets from thailand.
Bookmarks