Results 1 to 13 of 13

Thread: S52/M52 Exhaust Manifolds/Headers

  1. #1
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD

    S52/M52 Exhaust Manifolds/Headers

    Up for sale is one S52 header/exhaust manifold set. These come with the o2 sensors that are attached (see pics). The forward one has a dent, I assume from the removal of the engine though I cannot be sure. The picture looks exaggerated, but it is there. I would just run them, but I am removing them for cleaning, so might as well swap out. These do still have the EGR ports, but could be welded up for use for OBDI cars or EGR delete cars. Other then the dent, there is no noticeable damage.

    OPTIONAL: I will media blast and powder coat these high-temp black for the buyer at a charge of $70 if you choose.

    I am asking $40.00+ actual shipping

    Please feel free to PM or email me if you have any questions. Thanks!



    http://i229.photobucket.com/albums/e...f/IMG_0427.jpg
    http://i229.photobucket.com/albums/e...f/IMG_0428.jpg

    More pics upon request.
    Last edited by IraSummers; 07-31-2008 at 09:48 AM.

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  2. #2
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    bump

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  3. #3
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    no interest?

  4. #4
    Join Date
    Aug 2007
    Location
    Waipahu,HI
    Posts
    346
    My Cars
    1995 325I
    Curious to know if these would work on a 95 M50 motor (with stock exhaust for now)? Thanks. PG.
    H&R springs/GR2 shocks/Custom TMS JC chip/S50 cams/21.5lb injectors/Shorty headers/Stromung cat-back/5 speed swap/Dr Vanos Stg II/Sachs clutch kit/3.15 LSD/KN af/BW silicone t-body boot/TMS sways/TMS UDP/TMS drilled rotors/SS lines/PBR pads/Depo Gen-IV 55w 6k dde hid h/l's/Apexcone Crystal 35w 6k hid fogs/hi-beam with fogs mod/FDM/LBF delete/UUC goodies.

  5. #5
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    It will bolt up to the head, you need to have the EGR ports welded up. As far as bolting to your piping, I'm not sure. I know alot of the m50/s50 guys upgrade to this as it's much cheaper then headers and nearly the same gains, but I'm not sure how it's piped. You may want to search that. Make me an offer and you can try it out =D.

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  6. #6
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    Price changed.

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  7. #7
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    bump

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  8. #8
    Join Date
    Aug 2006
    Location
    San Diego/760
    Posts
    1,096
    My Cars
    97 e39 540i 94 e36 325is
    those wholes are actually for the secondary air pump, but free bump

    Bilstein Sports/ H&R Race/ UUC Swaybarbarians/ AA ECU/ Cosmos V.2 CAI
    Custom Catback/ Depo Projectors & Clears

  9. #9
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    Quote Originally Posted by L3R E34 View Post
    those wholes are actually for the secondary air pump, but free bump
    thanks.

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  10. #10
    Join Date
    Jan 2003
    Location
    MN
    Posts
    4,954
    My Cars
    E70d
    I broke my 4-5-6 header, if you don't want to 'part it out' I will just take both.. I dont mind the dent since I won't be using it.

    What do you think?

  11. #11
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    Quote Originally Posted by GEN3RIC View Post
    I broke my 4-5-6 header, if you don't want to 'part it out' I will just take both.. I dont mind the dent since I won't be using it.

    What do you think?
    They would be useless seprated. How does $40 shipped sound? I can send both or only one and trash the other. Let me know, I prefer pay pal. See sig for my address.

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  12. #12
    Join Date
    Aug 2007
    Location
    boone nc
    Posts
    898
    My Cars
    98 E36, 86 Fiero V8, 83 300SD
    still here.

    Summers Show & Go
    Powder Coating, Sand Blasting, and Custom CAIs

    Euro Dyne | Euro Dyner's Deal of the Week!!!

    [My Car and Track Pics]

  13. #13
    Join Date
    Jan 2003
    Location
    MN
    Posts
    4,954
    My Cars
    E70d
    Sold to me. Thanks for the deal.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •