I need a new 02 sensor for the 95. How hard is this to do? anything special I need to know about it?
the stealership wants 290 to do this. I can get an 02 sensor for 85 bux.
easy or not?
99 cobra vert
621rwhp/464rwtq
PUMP GAS, 15 PSI NON-INTERCOOLED
It's pretty easy, all you need is a 22mm or 7/8" flarenut wrench and possibly some penatrating oil/spray to grease the skids.
==============================
'92 BMW 325is - Alpine White
==============================
"A bad peace is even worse than war."
-- Tacitus
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-- George Orwell
and patience.......
on my last car, i used a wrench, and sledge-hammer. otherwise, simple diy.
'97 M3
And be ready to donate some knuckle skin if you're not careful.
Otherwise a 15 min task.
: Good excuse to by mechanics gloves - 2 pair for $25 at Costco.Originally posted by WannaM
And be ready to donate some knuckle skin if you're not careful.
Otherwise a 15 min task.
==============================
'92 BMW 325is - Alpine White
==============================
"A bad peace is even worse than war."
-- Tacitus
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-- George Orwell
piece of cake
I used a friggen crescent wrench.. A little bit of a beeesh because the size of the wrench. If I had the right tool, it would have taken 5 minutes.
If you can rent the o2 sensor tool from AutoZone, by all means please do so. It is so much easier with it. Here's a tip, when you're screwing on the new sensor into the pipe, make sure you follow the wires closely. The wires will tend to twist and by the time you screw it all the way, one or more wires would be stripped.
John
05 MCS (200.75whp/179.83wtq)
■ ALTA ■ GIAC ■ MINIMANIA.COM HEADER ■ INVIDIA ■ B&M ■ R-SPEED ■ M7 ■ LOTF ENGINE DAMPER ■ ASA AR1 ■
I tried, but wasn't able to use an o2 sensor socket - not enough clearance on top.Originally posted by mace
If you can rent the o2 sensor tool from AutoZone, by all means please do so. It is so much easier with it. Here's a tip, when you're screwing on the new sensor into the pipe, make sure you follow the wires closely. The wires will tend to twist and by the time you screw it all the way, one or more wires would be stripped.
==============================
'92 BMW 325is - Alpine White
==============================
"A bad peace is even worse than war."
-- Tacitus
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-- George Orwell
if youre still looking to buy a O2 sensor, I have a brand new one for sale... $75 shipped and I take paypal.
Email me at jonsibal@cox.net if youre interested.
Bookmarks