95s52- what are your mods? I will probably be going up to sac raceway again soon to try to get a 13.5 1/4 pass with my f-ed up engine. We should set something up where we get a few forum members out to the track =)
Dave- put me in on the 13s list. All my info is in my sig.
13.701 @ 103mph, 2.108 60 ft
Last edited by m3luckyoo; 02-18-2010 at 11:50 AM.
Yellow 1995 BMW M3 1 out of 8,515. Build Date: 10/94
Engine- S52 OBD1 Swap, TRM Chip, 21.5 lb. inj., 3.5 HFM/ECIS, AA catback exhaust
Transmission- Aluminum flywheel, 3.23 Diff
Suspension: H&Rs and Bilsteins, Powerflex/ AKG Bushings, X-Brace, UUC Swaybarbarians
Rims: 18x8.5 BBS RCs FORGED
Brakes: Brembo Rotors, Hawk Pads, Steel Brakelines
Dynojet RWHP: 250.9 TQ: 237.72 CA SMOG LEGAL POWER! =)
Best 1/4 mile: TBD
Weight: 2650 lbs w/ 1/4 tank of gas
UUC EVO III SSK | M50 Intake Manifold | Conforti 3.5" CAI | AA Software | 3.5" HFM (unplugged)
Fan Delete | Strömung Exhaust | UUC Stg2 Ltw Flywheel | X-Brace | AA Track Pipe | 3.46 Differential
1/4 mile: 13.3@104.2mph; 8.6 in 1/8; 2.04 60' | Best 1/8 mile: 8.3@83mph; 1.81 60'
Dyno: 242rwhp/232rwtq SOLD
Here's my best run of last night...
Mods:
3" AA Intake
AA Track pipe
AA Gen 3 Exhaust
Crack Pulley
AA Flywheel
AA Clutch
Full car, spare, all interior pieces, etc...
99 TitanSilber ///M3
13.90 @ 101 mph
i updated/added the last three. its great to see the growing participation in drag racing.
Powertrain: Big Bore 87mm S50| Boost Logic Gen 2 Mani | BorgWarner S366 | CP 8.5:1 pistons | Eagle Rods | O-Ringed block | Tial 50mm | Precision 46mm | LINK G4 standalone | ZF| F1 stage 3 clutch/15lb ltwfw| UUC Black TM/E| Vorshlag MM's | 3.23LSD w/AKG race bushings| AKG race subframe bushings| 'Bear Motorsports' Re-enforced subframe | Walbro 525lp fp| VPD pulleys| 4'' DP into 3.5 straight pipe"||
Handling: FK konigsports| '95 M3 strut mounts| Rogue Engineering RSM's| UUC RTAB's| 20mm front spacers| 2915lbs Full interior
Aesthetics: M3 bumpers| 18''x 8.5/9.5 BBS LMs| ZKW's| 50w 6000k HID| Smoked Corners| 50% wndshld/5% all around| M3 sedan seats F&R| Black headliner| Black/Grey suede door panels| ZHP knob| M3 steering Wheel|
Mods: obd1 s52, SS replica headers, SS race mid-section, SS exhaust, euro intake, 3.5" hfm, turner tune, 24lb injectors, uuc flywheel, m5 clutch.
well im still chirping 2nd...just not spinning for half a second anymore. Still on the same old federal 595's I bought used years ago. One side is at about 30% and the other side is about 60% because of the peg leg 1-2 shifts....
Im waiting on my friend to send me a pair of 8.5 ds2's with re-o1r's but hes taking forever! A local friend has some kumho spt's for $100 almost brand new so i just might go with those since I cant afford new tires right now. The stock clutch is starting to get more worn, I feel the grabbing point getting higher lately.
what slicks were you running again?
Powertrain: Big Bore 87mm S50| Boost Logic Gen 2 Mani | BorgWarner S366 | CP 8.5:1 pistons | Eagle Rods | O-Ringed block | Tial 50mm | Precision 46mm | LINK G4 standalone | ZF| F1 stage 3 clutch/15lb ltwfw| UUC Black TM/E| Vorshlag MM's | 3.23LSD w/AKG race bushings| AKG race subframe bushings| 'Bear Motorsports' Re-enforced subframe | Walbro 525lp fp| VPD pulleys| 4'' DP into 3.5 straight pipe"||
Handling: FK konigsports| '95 M3 strut mounts| Rogue Engineering RSM's| UUC RTAB's| 20mm front spacers| 2915lbs Full interior
Aesthetics: M3 bumpers| 18''x 8.5/9.5 BBS LMs| ZKW's| 50w 6000k HID| Smoked Corners| 50% wndshld/5% all around| M3 sedan seats F&R| Black headliner| Black/Grey suede door panels| ZHP knob| M3 steering Wheel|
Last edited by 95s52; 02-21-2010 at 04:29 AM.
Mods: obd1 s52, SS replica headers, SS race mid-section, SS exhaust, euro intake, 3.5" hfm, turner tune, 24lb injectors, uuc flywheel, m5 clutch.
"Torque is like cowbell... you can never have too much." - Michael Cervi
Last edited by 95s52; 02-22-2010 at 02:00 AM. Reason: Automerged Doublepost
Mods: obd1 s52, SS replica headers, SS race mid-section, SS exhaust, euro intake, 3.5" hfm, turner tune, 24lb injectors, uuc flywheel, m5 clutch.
No fair you are on slicks! I am going to go back to the track sometime soon with some new Direzza star specs and hopefully 1st to 2nd won't spin as much.
If I had some mickey thompsons and my clutch held I would launch the car at 6000rpms and hit a 1.7 60ft and run 12's!
In all seriousness though, congrats on the new time! What rpm were you launching at?
“If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government, and which against the usurpations of the national rulers may be exerted with infinitely better prospect of success than against those of the rulers of an individual State. In a single State, if the persons intrusted with supreme power become usurpers, the different parcels, subdivisions, or districts of which it consists, having no distinct government in each, can take no regular measures for defense. The citizens must rush tumultuously to arms, without concert, without system, without resource; except in their courage and despair.” – Alexander Hamilton, Federalist No. 28
Haha, thanks. But those are hardly the ideal drag racing tires. Like I said, I bought them for $50. Just to give you an idea, in 2004/05 they where used on a Miata for road racing. Then a guy used them on his 450hp drag Intrgra for 3 seasons. Then then sat for a year or two. That being said, I still believe they have a few 1.6's left in them. Although due to my incompetence, I've never been able to take them there. I launched them anywhere from 4k-6k. The clutch didn't like the 6k start. I put a new one in this wed, but now its throwing a CE..
Also, I wish I was a shifting/launching god like you.
Mods: obd1 s52, SS replica headers, SS race mid-section, SS exhaust, euro intake, 3.5" hfm, turner tune, 24lb injectors, uuc flywheel, m5 clutch.
Ah I see. Those are good 60fts then if the tires have been used that much. Shifting quick isn't hard, but it takes practice. Try sitting in a seat and do the motions as fast as you can and then go practice in the car.
Now you need to break in that new clutch so don't go shifting really quick until 500 miles (if it's a stock clutch). Hopefully I will be able to get a 1.8 flat 60ft this year and beat your time, but I feel like my clutch might be hurting. It held up just fine when I went from 1st to 2nd and 2nd to 3rd when racing a G37 last night so hopefully it's ok.
“If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government, and which against the usurpations of the national rulers may be exerted with infinitely better prospect of success than against those of the rulers of an individual State. In a single State, if the persons intrusted with supreme power become usurpers, the different parcels, subdivisions, or districts of which it consists, having no distinct government in each, can take no regular measures for defense. The citizens must rush tumultuously to arms, without concert, without system, without resource; except in their courage and despair.” – Alexander Hamilton, Federalist No. 28
When are you planning to hit the strip next? I feel like there is a little rivalry developing between you me and jworms. You had the fastest time between us, then I did that 13.34. Then you put your diff in and passed me with the 13.29. Then worms beat my time by .004. I went out and shaved another .1xx passing up the both of you. The three of us are with a .122 of each other. Like I've told Johnathan, the ball is now in your court
I've mentioned it to you before, but I'll say it again. You wouldn't believe how often your accomplishments of a low et with a low trap are brought up amongst my friends. I would really love to see you abandon your ls1 plans and and invest some money into that s52 of yours. With your driving skill, I'm sure you can be in the mid 12's with a few bolt ons and a tune.
Last edited by 95s52; 02-22-2010 at 12:01 PM.
Mods: obd1 s52, SS replica headers, SS race mid-section, SS exhaust, euro intake, 3.5" hfm, turner tune, 24lb injectors, uuc flywheel, m5 clutch.
Wow that is a very big compliment. Thank you very much.
The LS1 plans are down the road in a couple years so the S52 will still be here for a while. When TRM comes out with a tune for OBD2 I may buy it because I think my car can benefit from a good tune. I may end up doing the raceland headers and custom midpipe (for weight savings) because those are cheap options with good results.
I do think that as my car sits now I could manage a 13.2 flat or high 13.1 if I was able to get a 1.80 60ft, but I need better tires than the UHP Exclaims I have right now. If I were to get DR's then I probably could get those 60fts but I kinda want to do it on street tires.
“If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government, and which against the usurpations of the national rulers may be exerted with infinitely better prospect of success than against those of the rulers of an individual State. In a single State, if the persons intrusted with supreme power become usurpers, the different parcels, subdivisions, or districts of which it consists, having no distinct government in each, can take no regular measures for defense. The citizens must rush tumultuously to arms, without concert, without system, without resource; except in their courage and despair.” – Alexander Hamilton, Federalist No. 28
for what it's worth, i probably won't get another shot at it until around november when conditions are better...that's also assuming i don't completely break my car before that ( http://forums.bimmerforums.com/forum...3#post18729923 )
isn't it great? sure, it's fun to have our friendly banter about who will do it first, but the best part is that it looks like we're all going to get there eventually...with [hopefully] many more to come, some of which will probably raise the bar even further! i can't wait!
completely agree! i would love to see what he could do with a couple more mods. i think he's definitely got what it takes to be the one who runs 12s with the least amount of work done. that in itself is one hell of a bar to set!
UUC EVO III SSK | M50 Intake Manifold | Conforti 3.5" CAI | AA Software | 3.5" HFM (unplugged)
Fan Delete | Strömung Exhaust | UUC Stg2 Ltw Flywheel | X-Brace | AA Track Pipe | 3.46 Differential
1/4 mile: 13.3@104.2mph; 8.6 in 1/8; 2.04 60' | Best 1/8 mile: 8.3@83mph; 1.81 60'
Dyno: 242rwhp/232rwtq SOLD
what happened to the list?
Bookmarks