Page 5 of 13 FirstFirst 12345678910111213 LastLast
Results 101 to 125 of 309

Thread: e36 n/a 1/4 mile archives w/ standings

  1. #101
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    No, The engine is an US S52 OBDI

    i wish i hade the Euro, but my S54 is on the stand waiting to kill all E36 N/A Records

    but first i will break the record of N/A 1/4 mile Run with this S52 US
    Last edited by MR.E36i; 12-07-2008 at 12:47 AM.
    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  2. #102
    Join Date
    May 2005
    Location
    Virginia
    Posts
    4,417
    My Cars
    1980 Firebird
    Quote Originally Posted by fishforlife View Post
    she has and will continue to lose more weight...she should be 2450lbs with me in at at the track. i also plan on having a new transmission/gears/headers/cams/tune
    maybe a paint job

    depending upon where the bar is set i may have to revise my goals
    it is basically stripped down completely isn't it? Are you going with ebay headers?

    I think when TRM comes out with a tune for OBD2 then I will end up getting that tune and then also doing 3.73lsd, DR's, midpipe and headers for some weight loss and then I will be done as far as NA goes. For me, I would be happy with a 13 flat or high 12 when it is all said and done as far as NA goes.

    I could get my car down to a really low weight, but I just don't want to strip it out like that. I will be happy if I can be the fastest n/a M Coupe on the boards. That's really my goal and I want to do it without cams.
    “If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government, and which against the usurpations of the national rulers may be exerted with infinitely better prospect of success than against those of the rulers of an individual State. In a single State, if the persons intrusted with supreme power become usurpers, the different parcels, subdivisions, or districts of which it consists, having no distinct government in each, can take no regular measures for defense. The citizens must rush tumultuously to arms, without concert, without system, without resource; except in their courage and despair.” – Alexander Hamilton, Federalist No. 28

  3. #103
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    [quote=fishforlife;

    Hey Man

    Stop calling her she, she will not do any good number if you keep calling her she


    can you guy's finde me cheep CF Hood, am looking for one
    Last edited by MR.E36i; 12-07-2008 at 04:13 AM.
    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  4. #104
    Join Date
    Feb 2008
    Location
    Fircrest
    Posts
    3,184
    My Cars
    13 5.0| 11 SHO| 97 M3/4
    im getting a 3.91 and my M50 install in the next month, ill report back. i dont like being the slowest M in the listing,

    im expecting 14.2's@99. we'll see.

    425whp/401wtq and 3496lbs - Race car
    97 M3/4 -Daily

  5. #105
    Join Date
    Apr 2005
    Location
    Louisilanta
    Posts
    2,350
    My Cars
    hybrid
    Quote Originally Posted by Tony Soprano View Post
    im getting a 3.91 and my M50 install in the next month, ill report back. i dont like being the slowest M in the listing,

    im expecting 14.2's@99. we'll see.

    you should be able to achieve that easily, although the M50 manifold is really only going to adjust your trap speed. The torque curve with the obd2 manifold is really nice for drag racing i.m.o.
    I did 13.7@100 with exhaust/flywheel, obd2 stock. Although the car put down 226/229 which was really strong
    Alpha-N ///M - Youtube

  6. #106
    Join Date
    Sep 2007
    Location
    Sarasota
    Posts
    2,222
    My Cars
    97 M3/4 2001 SVT Lightin
    Quote Originally Posted by Tony Soprano View Post
    im getting a 3.91 and my M50 install in the next month, ill report back. i dont like being the slowest M in the listing,

    im expecting 14.2's@99. we'll see.
    I picked up a .1 or .2 after the swap after the M50.

    r/t - .303
    60' - 2.249
    330' - 6.253
    1/8 - 9.520
    mph- 74.31
    1000' -12.310
    1/4 - 14.676
    mph - 93.63


    For some reason it was still 80 degrees at BMP at 9pm and 3 miles east of there 69 degrees.
    Also it was weird how I picked up .2 buy going full soft on the pss9s.This seems pretty weird to me to.
    I swear this has to be one of the slowest tracks on the east coast.

    __________________
    Last edited by racer m; 12-19-2008 at 09:44 AM. Reason: Automerged Doublepost
    BFC O.T. Weekday drunks club Member#17


  7. #107
    Join Date
    Oct 2005
    Location
    Virginia Beach, VA
    Posts
    13,327
    My Cars
    99 M3, 01 F350
    I really need to head to the strip fish and see what my M can do..
    "Torque is like cowbell... you can never have too much." - Michael Cervi


  8. #108
    Join Date
    Oct 2005
    Location
    Virginia Beach, VA
    Posts
    13,327
    My Cars
    99 M3, 01 F350
    for sure man.. I still have some time here in Iraq... but I'll definately see what's up ...

    I ran 13.9 @ like 99 when I had the car out in Hawaii. I went out with some buddies on a friday night before they closed the strip down, and was messing around with them.. Nothing serious on the mods, but I did have the passenger seat out, and back end stripped

    For sure though.. Get the car set up with all the new goodies (safety mostly, seats/harness) and I'll see what I can do and get out to the strip

    my bad.. didnt see the actual question...

    I should be home 1st/2nd week of april. I have to check into my next command first of May at Great Lakes Naval Station (North Chicago) and should be settled in by the end of May hopefully with either an appt/house...

    keep in touch for sure
    Last edited by 99MPower; 12-24-2008 at 09:24 AM. Reason: Automerged Doublepost
    "Torque is like cowbell... you can never have too much." - Michael Cervi


  9. #109
    Join Date
    May 2005
    Location
    Virginia
    Posts
    4,417
    My Cars
    1980 Firebird
    Quote Originally Posted by S52Mcoupe View Post
    you should be able to achieve that easily, although the M50 manifold is really only going to adjust your trap speed. The torque curve with the obd2 manifold is really nice for drag racing i.m.o.
    I did 13.7@100 with exhaust/flywheel, obd2 stock. Although the car put down 226/229 which was really strong
    The gearing matched with the M50 manifold will be a really nice change from what he has right now. If that LSD in the 3.91 is strong you will get a much better 60ft and therefore a much better ET.
    “If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government, and which against the usurpations of the national rulers may be exerted with infinitely better prospect of success than against those of the rulers of an individual State. In a single State, if the persons intrusted with supreme power become usurpers, the different parcels, subdivisions, or districts of which it consists, having no distinct government in each, can take no regular measures for defense. The citizens must rush tumultuously to arms, without concert, without system, without resource; except in their courage and despair.” – Alexander Hamilton, Federalist No. 28

  10. #110
    Join Date
    Jan 2009
    Location
    USA
    Posts
    31
    My Cars
    Yugo, Lada
    Quote Originally Posted by m3chaser View Post
    Nope. Diff is 3.23lsd right now. I am currently in the market for one but nothing as of yet.

    The times that I have in my sig and that vid I posted are with only intake and m50 manifold. Nothing else.

    I think when I get a 3.73lsd and DR's I will run loow 13's. We will see.
    what were your symptoms when your clutch was slipping?

  11. #111
    Join Date
    Jun 2005
    Location
    New York
    Posts
    317
    My Cars
    90 e30m, 99 323, 93 e36 race car,00 dinan m5
    Quote Originally Posted by fishforlife View Post
    bump for ebrahim's achievement
    12.7
    nice, 2650lbs with driver, those #'s get me motivated, time to dust off the car n lower the 12.6 #, as soon as the snow melts, lol , any vid of that run 12.7

  12. #112
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    Quote Originally Posted by bimmertc20 View Post
    nice, 2650lbs with driver, those #'s get me motivated, time to dust off the car n lower the 12.6 #, as soon as the snow melts, lol , any vid of that run 12.7
    Quote Originally Posted by fishforlife View Post
    bump for ebrahim's achievement
    12.7

    Thanks Guy's, i have video but the time screen was not working that time,
    i will Add it later in this post,

    by the way the car was able to do more than that time but we where happy with the record and we left,

    bimmertc20:-
    Hope to see good number

    Fishforlife:-
    we whant to see another 12sec pass

    lets see whos going to hold the Best Record
    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  13. #113
    Join Date
    Dec 2005
    Location
    Melbourne, Australia
    Posts
    1,903
    My Cars
    E24, E34 x2, E36
    nice to see some quick times.

    us aussies are going back to the strip in a few months as its still way to hot here (117degF yesterday!!).

    im ordering some schrick284 cams, fitting one of those sexy CF plenums, and getting someone to tune it on the dyno.

    hopefully I will see some times well into the 12sec zone.

    fingers crossed
    BMW’s
    90 E34 M5
    84 E24 M635csi standalone ecu with coil on plug
    94 E34 540i/6 SC 5-17psi Flex fuel/standalone ecu
    97 Z3 2.8
    97 E36 M3 euro SC still u/c


    OTHERS
    11 Audi S5 APR stg2
    19 Volkswagen Amarok V6


  14. #114
    Join Date
    Jun 2005
    Location
    New York
    Posts
    317
    My Cars
    90 e30m, 99 323, 93 e36 race car,00 dinan m5
    Quote Originally Posted by MR.E36i View Post
    Thanks Guy's,

    by the way the car was able to do more than that time but we where happy with the record and we left,

    bimmertc20:-
    Hope to see good number

    Fishforlife:-
    we whant to see another 12sec pass

    lets see whos going to hold the Best Record
    we felt there was more when we did the 12.6 too, but the diff was acting up, glad to see more car n.a in the 12's with bolt-on, our track is still closed, u need to give us a # to aim for when it opens,

  15. #115
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    Quote Originally Posted by bimmertc20 View Post
    we felt there was more when we did the 12.6 too, but the diff was acting up, glad to see more car n.a in the 12's with bolt-on, our track is still closed, u need to give us a # to aim for when it opens,
    Wish you All the Best,
    this 12sec Pass will be Replaced with high 11 SOON


    It's nice to See Bimmers are Moving towords 12 and 11 sec with their Bolt ON E36,

    i hope the Turbo/SC/Noz guy's will not cry later
    Last edited by MR.E36i; 02-08-2009 at 09:55 AM.
    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  16. #116
    Join Date
    Jun 2005
    Location
    New York
    Posts
    317
    My Cars
    90 e30m, 99 323, 93 e36 race car,00 dinan m5
    Quote Originally Posted by MR.E36i View Post
    Wish you All the Best,
    this 12sec Pass will be Replaced with high 11 SOON


    It's nice to See Bimmers are Moving towords 12 and 11 sec with their Bolt ON E36,

    i hope the Turbo/SC/Noz guy's will not cry later
    i'll b shooting for the 11's with this baby by next month, 90 e30 M3, i've a stroker 3.4 building to replace this motor after i get it running how i want
    Attached Images Attached Images

  17. #117
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    Quote Originally Posted by bimmertc20 View Post
    i'll b shooting for the 11's with this baby by next month, 90 e30 M3, i've a stroker 3.4 building to replace this motor after i get it running how i want
    WOOOOW All the BEST , am in the SAME Project but planing to fit it in my E36, but still on wiring study,

    are you going to run this with the stock wiring/ECU or standalone???
    Last edited by MR.E36i; 02-08-2009 at 12:30 PM.
    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  18. #118
    Join Date
    Sep 2008
    Location
    Brooklyn, NY, USA
    Posts
    18
    My Cars
    1997 BMW M3

    12sec pass

    I hear time moves 1 second slower where you are. lol. CONGRATS MAN. I love the competition. I'll be moving the bar alot higher when the track opens. No engine swap for me. I'm currently 3120lbs with driver. I may go on a diet. By the way, where are you located?

  19. #119
    Join Date
    Sep 2007
    Location
    Sarasota
    Posts
    2,222
    My Cars
    97 M3/4 2001 SVT Lightin
    ninja edit track was closed due to some Top Alcohol dragsters, and Pro Mods getting ready for a race there for this weekend
    Last edited by racer m; 02-14-2009 at 12:20 AM.
    BFC O.T. Weekday drunks club Member#17


  20. #120
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    Quote Originally Posted by Raymond97 View Post
    I hear time moves 1 second slower where you are. lol. CONGRATS MAN. I love the competition. I'll be moving the bar alot higher when the track opens. No engine swap for me. I'm currently 3120lbs with driver. I may go on a diet. By the way, where are you located?

    Good Luck,

    Am in Bahrain (Close to Dubai )
    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  21. #121
    Join Date
    Feb 2007
    Location
    Bahrain
    Posts
    156
    My Cars
    BMW E36 M3 Euro
    update Mr.E36i ??

  22. #122
    Join Date
    Jun 2005
    Location
    Powder Springs, Georgia
    Posts
    3,689
    My Cars
    2000 328ci
    Hmm. I have not had a chance to run mine. MR. E36 give more info about your skinny front and rear slick set up.

  23. #123
    Join Date
    Apr 2006
    Location
    BAHRAIN
    Posts
    531
    My Cars
    E36 S54 soon
    Quote Originally Posted by swollix View Post
    Hmm. I have not had a chance to run mine. MR. E36 give more info about your skinny front and rear slick set up.
    Weld Racing Light Weight WHEELS , they are mostly used by Mustangs and Camaros 8,5"

    front size are 135/70/15
    Rear is 225/50/15

    FOllLOW UP MY RE-BULID THRED
    -Re-bulding a Drag Race E36 M3 convertible
    - Fully Moded S54 N/A Going IN
    ..STAY TUNED..

  24. #124
    Join Date
    Jun 2005
    Location
    Powder Springs, Georgia
    Posts
    3,689
    My Cars
    2000 328ci
    Quote Originally Posted by MR.E36i View Post
    Weld Racing Light Weight WHEELS , they are mostly used by Mustangs and Camaros 8,5"

    front size are 135/70/15
    Rear is 225/50/15

    How do they fit over your brakes?

  25. #125
    Join Date
    Nov 2007
    Location
    Sacramento, CA
    Posts
    1,513
    My Cars
    95 m3
    dave, my man, props on moderating the thread, but it looks like you robbed swollix out of 12th on the standings.

    there is a local guy selling a set of basketweaves. how happy are you with your strip wheel/tire set up? the guy wants $200 for 4 rims.

Page 5 of 13 FirstFirst 12345678910111213 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •