Results 1 to 8 of 8

Thread: Installed New Depos HID's annoying "CHECK LOW BEAM"

  1. #1
    Join Date
    Jul 2004
    Location
    Tulsa,OK
    Posts
    234
    My Cars
    97 540, 02 745, 04 RX8,

    Installed New Depos HID's annoying "CHECK LOW BEAM"

    Well, I installed my new depo headlights with hid's and now everything works, but I get an annoying message about "CHECK LOW BEAM" all the time... except when I turn the lights on, the message disapears for a few minutes, then it beeps at me again...

    Did i not do something correctly?

    How can I correct this problem?

    My car is a 1997 540i, and the lights are DEPO, with DDM Tuning HID Kit...

    Thanks!

    BTW I did try searching but haven't found anything that would help me.


  2. #2
    Join Date
    Feb 2007
    Location
    Miami
    Posts
    796
    My Cars
    528i
    Did you get the error cancel decoders and are they installed correctly?

  3. #3
    Join Date
    May 2008
    Location
    cincinnati
    Posts
    2,031
    My Cars
    02 m5, cbr 929rr
    email the company you get them from.

    did you previously not have hids?

  4. #4
    Join Date
    Jul 2004
    Location
    Tulsa,OK
    Posts
    234
    My Cars
    97 540, 02 745, 04 RX8,
    I don't think i got the "Error Cancel Decoders" ... didn't know I needed them...

    I bought them from DDM Tuning... I will call them and inquire about the error cancel decoders... thanks!!!

  5. #5
    Join Date
    Oct 2005
    Location
    Minnesota
    Posts
    713
    My Cars
    1999 528iA Sport
    You need a resistor pack wired ahead of your ballast, compensates for the difference in resistance between your H7 lowbeam bulb and the ballast you have installed.
    More info here:
    http://www.bmwtips.com/tipsntricks/C...lowbeamfix.htm

    You have options:
    http://cgi.ebay.com/ebaymotors/HID-Bulbs-Out-Warning-Light-Canceller-Capacitor-H4-9006_W0QQcmdZViewItemQQcategoryZ36476QQihZ016QQite mZ260247108089QQrdZ1QQsspagenameZWDVW
    http://www.drivenmotoring.com/eShop/...tCode=RESISTER
    and OEM Hella from bavauto.com:
    http://www.bavauto.com//assets/produ...ting/87705.jpg
    I can't believe I've had my 528iA sport 14 years and counting . . .

  6. #6
    Join Date
    Feb 2007
    Location
    Miami
    Posts
    796
    My Cars
    528i
    They are 40.00 a set. DDM told me that most of the time they are needed, but not all the time. I needed them and installed them and I have no warning lights now. Hopefully that will fix your problem.

  7. #7
    Join Date
    Jul 2004
    Location
    Tulsa,OK
    Posts
    234
    My Cars
    97 540, 02 745, 04 RX8,
    I just called DDM and they're sending a pair to me!!! No charge!!! Excellent Customer Service... So far I'm happy with mu purchases from them... i'm on the waitlist for front & rear bumpers...can't wait to get them...

  8. #8
    Join Date
    Apr 2007
    Location
    San Jose
    Posts
    1,480
    My Cars
    2009 Jetta S
    funny, my Depos always tell me to check high beam. Or was it from the led plate lights great now I can't remember!
    SOLD1999 Silver Dinan 540ia: M5 Front Brakes,REMIXED Dinan CAI, stage 2 management and tranny software, Dinan exhaust with Resonator Delete, Dinan Stage 2 suspension, M5 rims 18x8 up front 18x9 in the rear wrapped in Continental Conti's 245/35/18's up front, 265/35/18's out back! 6000k P39's, w/ AE's, clear LED Tails, 6000k HID Projector Foglights.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •