Parting out a 1995 BMW m3 s50 engine (cams, lifters, crank, etc)

**SQ Bimmer** · 05-28-2008, 02:17 PM

I have a few e36 m3 engines (US 1995 3.0L s50 240 hp) with various miles that I am parting out. One of the s50 engines has 170k miles and is from an automatic car with perfect compression, currently running strong in my track car. I can sell this longblock intact for $1800 (OBO I guess).

Here's pics of some of the parts:
http://bavparts.com/pics/misc/s50_parts/

Part-out prices are as follows, and include shipping (through the end of the month) unless otherwise noted.

$350 - s50 cams with trays and caps *CAMS SOLD OUT - KEEP CHECKING BACK*
$275 - s50 crank (4 available)
$125 - s50 rods (3 sets available)
$100 - S50 pistons (3 sets available)
$40 - 24 lifters (or $2 each)
$60 - VANOS unit *NO KNOWN GOOD VANOS UNITS AVAILABLE*
$10 - VANOS oil line
$30 - oil filter housing
$30 - oil pump
$20 - oil pickup
$45 - m/s50 oil pan
$20 - lower front timing case cover
$50 - crank pulley/harmonic dampener
$50 - "threaded ear" starter
$30 - non-threaded ear starter
$90 - a/c compressor
$10 - belt tensioner (each)
$40 - OBDI exhaust manifolds
$225 + shipping - blank head
$125 + shipping - blank block
$90 - m/s50 intake manifold
$50 - all OBDI 6 cylinder vacuum and water lines with ICV
$40 - ICV
$40 - throttle body
$15 - engine mounting brackets (price each, no rubber mounts)
$100 - OBDI 6 cylinder VANOS automatic wiring harness
$150 - OBDI 6 cylinder VANOS manual wiring harness
$150 - 413 DME no chip
$40 - fuel rail with regulator
$40 - OBDI valve cover
$60 - 6 coil packs

PM or email me for package pricing.

I also have e30 conversion kits, including E34 oil pan, E34 oil pickup, E34 dipstick tube and dipstick.

I believe that's most of the engine besides some sensors here and there. Can meet almost anywhere in LA. Can ship these parts anywhere in the US and Canada. PM or email bavparts @t gmail d0t com.

**M-alicious** · 05-28-2008, 04:37 PM

good deals, good luck.

**93Coupe325is** · 05-28-2008, 05:20 PM

Um..why part it? How much for the whole thing assembled?

**Chuck6902** · 05-28-2008, 06:33 PM

I want the harness and the MAF...PM sent.

**SQ Bimmer** · 05-28-2008, 06:44 PM

Parting it because of the oil leak. It's worth more in parts than it is assembled with an oil leak.

If someone wants it intact, add up all those numbers and that's how much you can have it for.

PMs replied to.

**dannyboyrules** · 06-02-2008, 08:38 AM

How much for shipping crank to 95828?

**SQ Bimmer** · 06-02-2008, 02:07 PM

Originally Posted by dannyboyrules

How much for shipping crank to 95828?

PM sent.

**rennfahrer** · 06-02-2008, 05:51 PM

where is the oil leak coming from?
is the head straight and not cracked/warped?

**Motorsport3** · 06-02-2008, 10:49 PM

Was it leaking from the valve cover?

If not, how much shipped to 20164?

**mikese36m** · 06-02-2008, 11:18 PM

Interested in the AC Compressor. PM me and let me know about Shipping

**SQ Bimmer** · 06-03-2008, 01:57 PM

Originally Posted by rennfahrer

where is the oil leak coming from?
is the head straight and not cracked/warped?

Head has been sold.

Originally Posted by Motorsport3

Was it leaking from the valve cover?

If not, how much shipped to 20164?

I believe it was leaking from the front timing case cover, or the front of the oil pan.

PM sent regarding valve cover.

Originally Posted by mikese36m

Interested in the AC Compressor. PM me and let me know about Shipping

PM sent.

**Unleashed603** · 06-03-2008, 02:39 PM

When you say shortblock, do you mean a complete shortblock? or just a stripped down block?

**SQ Bimmer** · 06-03-2008, 02:57 PM

Originally Posted by Unleashed603

When you say shortblock, do you mean a complete shortblock? or just a stripped down block?

Stripped. Anything is possible though, I am not tearing down the block unless I sell the parts. If you want the complete bottom end we can work something out.

**Unleashed603** · 06-03-2008, 03:53 PM

Originally Posted by SQ Bimmer

Stripped. Anything is possible though, I am not tearing down the block unless I sell the parts. If you want the complete bottom end we can work something out.

alright, thanks. I just bought a 95' M3 with a rod through the block. I need to tear it apart and see exactly what i need. I will let you know, thanks

**SQ Bimmer** · 06-03-2008, 05:25 PM

Do it quickly, the crank and rods are sale pending...

**Keaton** · 06-03-2008, 06:36 PM

oh shit! still got the cams?
pics?
porsche1977924s@yahoo.com

shipping to Tempe AZ 85282

PM'ed

**Motorsport3** · 06-03-2008, 06:50 PM

Paypal sent for Valve cover.

**SQ Bimmer** · 06-03-2008, 08:12 PM

OP updated

**nibratch** · 06-03-2008, 11:25 PM

is that ac compressor still available?

**SQ Bimmer** · 06-04-2008, 03:02 PM

Yup, gave a couple people my paypal info for it, never received a payment. Money talks, PM sent.

**andrezbim** · 06-09-2008, 10:38 AM

will take ex manifolds and MAF.. price shipped to 44278?

**SQ Bimmer** · 06-11-2008, 03:30 PM

Lots of requests for cranks, rods, pistons, etc. No $ talking...

**Motorsport3** · 06-17-2008, 03:53 PM

I got the valve cover in excellent shape! Thank you! Its all cleaned up and off to powdercoat.

Feedback is done.

**tg633233kimo** · 06-18-2008, 09:51 AM

Do you still own the cams?
Thank you so much!

**Alvaro320** · 06-18-2008, 03:21 PM

the crank is in std measure?? is in good conditions?? could you send it to Argentina?? im very intrested in a crank like this to convert my little m20 into a m20b30... please answer me by email or pm

thankss Alvaro

Thread: Parting out a 1995 BMW m3 s50 engine (cams, lifters, crank, etc)

Thread Tools

Parting out a 1995 BMW m3 s50 engine (cams, lifters, crank, etc)

CA Parting out a 1995 BMW m3 s50 engine (cams, lifters, crank, etc)

Bookmarks

Bookmarks

Posting Permissions