Has anyone fit BBS RC's 18x10

[BimmerAddict]

On the rear??? If so show some pictures... And what you had to do to get them to fit.

[David Aye]

on the e36....dude its gonna be some major roll age on the fender...and the spacing has to be perfect.

[BL4CK-OUT]

I'm guessing the offset is 40 like my CH. If so, GOOD LUCK! I had a bitch of a time getting my 19x9.5 ET40 rears to fit with super slim 245/30/19 tires because I am lowered. If your car is dropped, you're going to have to flare out those fender arches a little bit, or get some crazy stiff suspension and not tuck the rear at all. It's going to be difficult.

[BimmerAddict]

the offset is actually 25!

[Motorsport3]

You'll need fenders like mine....(see sig)

At one point I was running 19 X 10.5 et25 in the rear with a 275/35/19 tire.

It will take a bit more than a baseball bat roll to do what you're trying to do.

[fsmtnbiker]

the offset is actually 25!

Not gonna happen, unless you want to pay a body shop to add an inch or two of fender. :)

[BL4CK-OUT]

^ Yup.

[calypso]

Not worth it, in my opinion, unless you go with flares. I have 18x9 ET 47's BBS's with 255's, and it's the absolute maximum tire/wheel I can fit.