H&R Spring question

[Tim95M3]

Alright, so I just got some H&R race springs, and supposedly the part number is supposed to read 50410.88 for the 95 model. This is what the front springs read, but the rears read 50412.88 . That number is what the 96-99 is supposed to read. Does this matter? did i get the wrong rears? I think the rears are the same anyways. Anyone?

[Tim95M3]

bump

[mike02]

call or email H&R and find out for sure. they have good customer service.

if the number on the springs is different i would call and find out. its probably just a new model or variation or something.

peace
MIke

[Vonbimmer]

I agree with Mike02. In addition the front springs are different in our 95's due to the spring hat being different, but I am fairly certain the back never changed since the rear suspension is the same 95 on. Hope that helps.

[Jrdeamicis]

I agree with Mike02. In addition the front springs are different in our 95's due to the spring hat being different, but I am fairly certain the back never changed since the rear suspension is the same 95 on. Hope that helps.

Well sort of...

The 96+ had double upper and lower outer ball joints.

The 95 had single ball joint up top and a rubber bushing on the bottom.

[Vonbimmer]

Very true, forgot about replacing mine with the later setup, but at least the arms are the same.

[Jrdeamicis]

Very true, forgot about replacing mine with the later setup, but at least the arms are the same.

I kept the regular 95 setup. I'm sure there are some advantages with the later ball joints but I did the same thing as you.

[art@rmeuropean]

Check out www.hrsprings.com (http://www.hrsprings.com), they have a list of all the part numbers for springs. If you did get the springs for 95 you will need new front spring hats, rears will be fine.