Help with NCS Expert

[MilosBMW]

Does anybody know,what is the password for edit profil of NCS expertentool.I have version of 3.0.8 but it is incomplete.When I tried to install it,was an error "A LZH ARCHIVE NOT FOUND" ,but i can start it.
Missing file: c:/BMW/INSTALL/ARCHIVE/NCS/CABI_IPO.LZH
If somebody have this file and a password,please send me a mail, I have more diagnostic software to exchange.

[heizervr6]

I'm missing the exact same file and am d-loading 5 different versions of EDIABAS right now in the hopes that one of them has it. If I find it I'll let you know.

[MilosBMW]

Thanks Christian ,I appreciate it.Btw,did you get PCMCIA card?

[heizervr6]

No, not yet. I would expect it to arrive sometime next week. :)

[hime100]

hello

i also looking for "ncs expertentool edit profile" password

did you get it ?

Thanks

[CarbonFibre1212]

Does anybody know,what is the password for edit profil of NCS expertentool.I have version of 3.0.8 but it is incomplete.When I tried to install it,was an error "A LZH ARCHIVE NOT FOUND" ,but i can start it.
Missing file: c:/BMW/INSTALL/ARCHIVE/NCS/CABI_IPO.LZH
If somebody have this file and a password,please send me a mail, I have more diagnostic software to exchange.

Hi, I have the same problem. Have you resolve it - have you got a pass for NCS edit option?

[CarbonFibre1212]

Hi, the same problem - have you got a pass?

[rondo]

try( repxet )cheers.

[hime100]

hi
i looking for help and instruction how to use the software ncs expertentool . i am looking for profession knowledge.
i can offer a job for the proper person.
thanks

[ZeroG]

I can't recall exactly, but the password is berlin26 or something like that. I'll have to think about it and see if I can dig it up.

[weiss]

Does anybody know,what is the password for edit profil of NCS expertentool.I have version of 3.0.8 but it is incomplete.When I tried to install it,was an error "A LZH ARCHIVE NOT FOUND" ,but i can start it.
Missing file: c:/BMW/INSTALL/ARCHIVE/NCS/CABI_IPO.LZH
If somebody have this file and a password,please send me a mail, I have more diagnostic software to exchange.
hello, please send the install file of NCS Expert to me, thank you.

[invictus1]

Does anybody know,what is the password for edit profil of NCS expertentool.I have version of 3.0.8 but it is incomplete.When I tried to install it,was an error "A LZH ARCHIVE NOT FOUND" ,but i can start it.
Missing file: c:/BMW/INSTALL/ARCHIVE/NCS/CABI_IPO.LZH
If somebody have this file and a password,please send me a mail, I have more diagnostic software to exchange.
i can help you with that file.
need the install kit for NCS Expert in exchange

BR,
Invictus

[Zorotech]

Did any body got password.

[1968camaro]

I was able to get the following...

INPA V4.4.7

EDIABAS 3.2.4

NCS v3.0.8

NCS v3.0.8 loads, but when loading it I get the Missing file: c:/BMW
/INSTALL/ARCHIVE/NCS/CABI_IPO.LZH the file is in the folder it just does not appear to load? And when I start NCS it does not have the default profile just Code control unit, allow ZCS reading and Expert mode???

Did you all figure this out can someone give me some guidance? I just need to code and adapt a new steering angle sensor in an E46.
Thanks in advanced Josh
weberjw at hotmail

[clutchplate]

argh, I get it all running, and it can read my GM/SA/VN codes from the ecu's and such, but the problem is when I go to entre FA... it doesn't bring up the sa options that are configured ... :/ so frustrating ...

does anyone know how to get it to show the FA codes ? I need to change from auto to manual gearbox... pls help :/

[Manopartstech]

hi mates ...can any one tell me how can i get instructions about the NCS EXpert ...as i have just changed my lcm in E39 and i have red dot on the cluster ...and i belive the it can be fixed with the NCS EXpert ...i will be very thankful if some one helps me in doing that

[gabimm6]

hello i have bmw x5 e70 2009 year . i need know how to change USA's radio frequensy to Europian radio frequensy. via Ncsexpert mode program. Thank you

[rahul1979unl]

Hi Mate

do anyone have a site where i can get the ncsexpert which works, so that i can install it on my laptop

as i see everyone is looking for the password, i will need help with that.
i have a E60 and i want to get my nav working

[DICKHILL]

try( repxet )cheers.
I can confirm that this password works on my NCS-Expertentool V3.1.0! (: