I have a dumb question regarding exhaust

[k04]

I know this may be a dumb question, but I wanted to make sure that I am not making a mistake. I have a friend that is trying to sell a car that has a straight pipe for my stock system with UUC muffler on it. His car '95 3.0 my car '99 3.2 Will the flanges at the header and everything back mate up? I appreciate your help in this matter. I will post a picture later of the system as I am not sure nor is he if its a custom system or manufactured, he does think it is manufactured.

Thanks.

[fivaxis]

Cat back I'm pretty sure is the same but I don't know about where the headers bolt up.

[L3R E36]

its the same from the headers back

[Rennmeister M3]

The major difference is you have more O2's and the air pump.

[k04]

The major difference is you have more O2's and the air pump.

as far as install goes for me is this going to be a major problem?


Thank you all for your help

[M III Pilot]

You'd have to get another O2 bung welded in, do whatever is needed to get the airpump working.
I don't have one so haven't looked at how they work, or how they're connected.

[RRSperry]

Do you mean putting a 96+ on a 95 or the other way?

Yes the manifold flanges will fit. You will need to have a O2 sensor bung welded in pre cat, and get 2 O2 sensor bung plugs for the post cat holes. The 95 exhaust support by the transmission will not fit. (I haven't done anything about it yet, I need to see how a 96 is set up)

I have no idea why you would want to put a 95 section on a 96+.. Unless you really don't like the new owner.

[k04]

well my buddy is trying to sell a car that is more street then mine but with a straight through exhaust with two race mufflers and nothing else. I was going to get a system made similar to that and was trying to save some headaches, but I am starting to think I should just get a system made. because this may be a huge headache in it self.