Carsoft Success!

[David Mc]

Weenick, try this driver with your USB adaptor 550374 (you will need to change the file extension from .pdf to .zip and extract it before use).

[E34ZombieHunter]

Very long time lurker here; mainly post a bit on BimmerFest, but time to join to get some help on Carsoft from people that sound very experienced from all that I have been able to skimmed through on my phone.
I bought Carsoft almost a year ago now, and have had some troubles getting it working, but had success through a docking system borrowed after my PC took a crap. Now moving away I have met some other people that need the aid of Carsoft, and I again need to use it.

I borrowed a computer from the person needing to borrow my software to get it setup, but it did not have a serial port, I purchased a serial to USB adapter that I had seen reccomened and successfully used to run Carsoft v6.5, but after getting the computer all setup, I discovered that the battery was toast, now again got another XP machine with a decent battery life for pulling diagnostic data, but am encountering some strange issues.

The Carsoft that come with my module contain the 10 files for a crack and have worked on 3 machines in the past with the proper port on them.
Now when I try to run the diagnostic sequence I get an error about Carsoft encountering an error and needing to close, followed by a crash of the program.
Reinstalled the program and now I can read live DME/EGS data, but if i try any other special function, or diagnostic, the program loads to 1/2 of the communication and gives the same error.

Right now Im using a Compaq PC, USB to Serial adapter with installed and configured software, followed by my cracked Carsoft v6.5( that has previously worked fine), into my 95 E34 540ia

If ANYONE could give any kind of guidance I would greatly appreciate it, whether it be download and do this, and check this, I ll double, triple I don't care how many times check if there is a chance that I can get this program back up and running to do diagnostic and not just the live data.

[SVD115]

does anyone have a good link for the sp1 download for carsoft?

everything seems super out of date that i'm coming across...

[David Mc]

Very long time lurker here; mainly post a bit on BimmerFest, but time to join to get some help on Carsoft from people that sound very experienced from all that I have been able to skimmed through on my phone.
I bought Carsoft almost a year ago now, and have had some troubles getting it working, but had success through a docking system borrowed after my PC took a crap. Now moving away I have met some other people that need the aid of Carsoft, and I again need to use it.

I borrowed a computer from the person needing to borrow my software to get it setup, but it did not have a serial port, I purchased a serial to USB adapter that I had seen reccomened and successfully used to run Carsoft v6.5, but after getting the computer all setup, I discovered that the battery was toast, now again got another XP machine with a decent battery life for pulling diagnostic data, but am encountering some strange issues.

The Carsoft that come with my module contain the 10 files for a crack and have worked on 3 machines in the past with the proper port on them.
Now when I try to run the diagnostic sequence I get an error about Carsoft encountering an error and needing to close, followed by a crash of the program.
Reinstalled the program and now I can read live DME/EGS data, but if i try any other special function, or diagnostic, the program loads to 1/2 of the communication and gives the same error.

Right now Im using a Compaq PC, USB to Serial adapter with installed and configured software, followed by my cracked Carsoft v6.5( that has previously worked fine), into my 95 E34 540ia

If ANYONE could give any kind of guidance I would greatly appreciate it, whether it be download and do this, and check this, I ll double, triple I don't care how many times check if there is a chance that I can get this program back up and running to do diagnostic and not just the live data.

If you are running v 6.5, have you installed SP1? (Check the dropdown menu "About Carsoft" - if it shows v6.5.05, SP1 is not installed, v6.5.06 has SP1 installed)

[E34ZombieHunter]

If you are running v 6.5, have you installed SP1? (Check the dropdown menu "About Carsoft" - if it shows v6.5.05, SP1 is not installed, v6.5.06 has SP1 installed)

It is showing that the v6.5.05, so mine must be without SP1, I have tried links before that did not have the correct amount of files or were dead links, is there a current file you could link or PM me with please?

[SVD115]

so, ive gotten my carsoft to work sometimes...and googling doesn't make it much easier unfortunately...heaps of info scattered everywhere!
so, i have it working-ish, it'll only read data off the 20pin under the bonnet, the OBD doesn't want to know me...
it'll occasionally read the modules, but if i try a full scan, it just says modules not responding, and then the individual scans don't work, but after start up, it'll read individual modules...

any advice?
Thanks.

[David Mc]

Make sure your antivirus is off.

[SVD115]

I don't have one
I purposely set this laptop up just for carsoft
No anti-virus or anything else that could affect the software

[figurefive]

Just wanted to post a thanks for the info in this thread. I was able to get Carsoft 6.5 working on my laptop over the weekend.

Using the info here I figured out the software provided with my eBay cable did not include SP1. I tracked down a Carsoft 6.5 download that included the SP1 installer. With the SP1 file now available I followed David Mc's instructions, and it worked like a charm.

I'm running Windows 10 Pro, so I set up VMWare Player (https://www.vmware.com/products/player) with a 32-Bit Windows 7 Ultimate virtual PC (Carsoft 6.5 won't run on 64-bit Windows). I use an ATEN USB to RS232 (http://www.aten.com/products/productItem.php?model_no=UC232A#.VqZDd1L3SFU) converter to provide the serial interface which VMWare is able to pass through to the virtual machine.

I've only used it to diagnose and clear an airbag light, but it went off without a hitch.

I'm due for an oil service and need to replace an O2 sensor, so I'll see how it does with clearing those warnings off the cluster this weekend.

[clauddr]

Hi David.

I just bought a carsoft interface 6.5 from ebay and I can.t make it work. I.m using a laptop on windows 7 64-bit(virtual machine with win xp) with usb to serial convertor. I've intalled the software accordingly to the instruction on this thread . The software version is the one with sp1.

I've turned off the antivirus, firewall, all but... when I try to diagnose the car "the module not respond" for every single module. I've tried on my 00' e39 and on my father's 97' e36, same thing on both cars.
Thanks in advance

[David Mc]

Carsoft v6.5 is 32bit software and is designed to work with a true serial port. Installing it on a Windows XP 32 bit virtual machine will resolve the first problem, but not the second as I have not found a USB to serial convertor that works with the software. Carsoft used to suggest using a PCMCIA card with an Oxford chipset, but I can't verify whether this actually works or not. I think you would probably be able to buy an old XP laptop with a true serial port cheap these days and that would be the best solution to your problem.

[sliverdream]

I am having 2 problems with my car first it has started in drive second i can smell fresh petrol from car when started from cold . It was recently tested nct ( mot in uk ) & passed it. Here is the scan of my car bmw e34 520i auto.
564213564214564215

Here is a link to another site i asked same question :
http://forum.bmw5.co.uk/topic/118811-car-scan/

[David Mc]

The car starting in drive looks like the selector lever is out of adjustment and the diagnostic result tends to verify this as a possible cause. The petrol smell is due to the temperature sensor error, which may have caused the fuel mixture to be unduly enrichened. Break out your workshop manual (or TIS) and check the gear selector lever adjustment, then run another diagnostic and see what errors pop up.

[bambangmuliyadi]

DB15 pin 1 to Round BMW 20 pin connector pin 7
DB15 pin 2 to Round BMW 20 pin connector pin 20
DB15 pin 3 to Round BMW 20 pin connector pin 17
DB15 pin 4 to Round BMW 20 pin connector pin 15
DB15 pin 5 to Round BMW 20 pin connector pin 16
DB15 pin 9 to Round BMW 20 pin connector pin 19
DB15 pin 15 to Round BMW 20 pin connector pin 14

Dear David,
The following conditions pinout mine:
DB15 pin 1 to Round BMW 20 pin connector pin 7 = Same
DB15 pin 2 to Round BMW 20 pin connector pin 20 = Same
DB15 pin 3 to Round BMW 20 pin connector pin 17 = Same
DB15 pin 4 to Round BMW 20 pin connector pin 15 = Same
DB15 pin 5 to Round BMW 20 pin connector pin 16 = Nothing
DB15 pin 9 to Round BMW 20 pin connector pin 19 = Same
DB15 pin 15 to Round BMW 20 pin connector pin 14 = Same

Disappearance cable DB15 pin 5 to BMW 20 pin connector pin 16, which causes no detection ECU / EGS when I scan?
Every time I scan always appear "Module Does Not respond" on ECU & EGS

[David Mc]

Yes, pin 16 is ignition signal, add another wire for the connection and your problem will be gone.

[bambangmuliyadi]

Dear David,
The following conditions BMW Carsoft 6.5 Interface mine:
DB15 pin 5 on the Interface no connection on pcb.

My interface is the same whether you use?

564685564686564687564688564689

[David Mc]

I really had to go digging to find my old Carsoft interfaces as I have not used them for years. One of them looks identical to yours - externally, but apart from using the same main processor chip, internally it is very different. Carsoft interfaces use different serial port functions to those used by INPA interfaces, so it is possible that rather than detecting a true ignition signal from your car, it emulates an ignition signal. There are so many variants of Carsoft v6.5 interfaces in use that it is impossible to guess how your particular device achieves this - but I suspect that it is via the internal circuit design. The DB15 connector provides the connection to your car, but it is what your computer "sees" from the serial connection end of the interface that will determine whether it recognises an ignition signal.

The front of the circuit board on my interface is screen printed "BMW Intreface v1.6" and on the back "OBD FACTORY 101". I'm guessing that my unit is an old version of the one you have as the ATMEL chip is a different shape (AT89C4051-24PU with identical number of pins) and has a bank of 7 resistors mounted next to it. The 3 terminal positive voltage regulator mounted above the main Exilinx XC9536 chip is also a full-sized L7805CV, but is designated as IC3, the job of which appears to be done by a little 8 pin IC on your unit.

[bambangmuliyadi]

Thanks David,
This time I was able to connect my DME, E36 M40 (318i 1992).
The problem has been there on the RS232, because I use a USB-RS232, a variety of USB-RS232 converter I have purchased but none managed to connect to my DME.
I assemble T5730 (Thin Client base), and have a real RS232 port (com1), and i have managed to connect to all the modules in my E36.
The bottom line for cars with OBD1 interfaces must use real RS232

Many Thanks to David for his guidance.


573924 573923 573922 573922

[daniusound]

Where can i found Sp1file? Did you find it?

- - - Updated - - -

Sp1 file needed, PM. Thanks in advance

- - - Updated - - -

Did you find SP1 file? PM please

[David Mc]

Look here https://www.dropbox.com/s/w1u54g7z84elojd/BMWv65SP011ENG.exe?dl=0

[Dotcom1970]

Hi there. Sorry if these questions have been asked, but looking for a concise answer!

Just purchased a carsoft 6.5 serial interface, but I'm having issues installing the supplied software. I'm running a windows 10 x64 laptop (Dell Latitude D630) with an inbuilt serial port, but the supplied software only wants to work on x86 and get an error about CCMV32AA.exe not being compatible. I notice that the official carsoft software is now V12.

I can see talk of getting it to work under Win 7 x64, but the links are either out of date or password protected.

Any help would be greatly appreciated

[David Mc]

Carsoft v6.5 was only designed to work with cars built before April 2004. Later versions (i.e. after v7.0) require a security dongle to work at all - I won't go through my thoughts on the later versions here, but there are lots of better options available. The software is 32 bit and requires a true serial port to work correctly - as virtually every copy of v6.5 software I have ever seen is a pirated version, the functionality varies from zero to 100%. The only way I can imagine you installing this software successfully on a 64 bit system, would be to install it to run in compatibility mode for Windows XP SP3. You need to install v6.5.0, then SP1, which will update the software to v6.5.06.
Personally for the amount of functionality you will get from the software, I would suggest using your Carsoft interface as a wheel chock. If you want a computer based diagnostic software solution, consider purchasing either an ADS/OBD (199*-2006) or K+DCAN (2000 - 2010) interface and using INPA (and/or DIS) or ISTA/D (DIAGNOSTICS only). For a wireless solution look at Carly for BMW Pro which will do diagnostics and some coding. A Carly Gen 2 interface for iOS will give you model coverage from 199*-current or you can use a bluetooth interface with adapter cable set for Android systems.
You can see Carly in action here https://www.youtube.com/watch?v=-KjUiUOTxS8&feature=youtu.be

[mapkrk]

Hello, I have been trying to read DME or Live DME or EGS modules on E34 520i late 95' and I get "no response from module" all the time. It works just fine on other cars but I have to admit this one is the oldest I have worked on. Anyone knows if the car is too old to read DME and EGS modules or some issues with OBD1 ? I would appreciate any help, thank you.

[Mx310]

Finally, after 3 months of experimenting, copying and deleting files, computer harddrive purging and reprogramming I have succeeded in making Carsoft 6.5 SP1 work with my E36!

I can now conduct diagnostics and read live data and have access to all of those nice little extras like door lock programming etc..

Could you send me the program I only find a torrent of 4 files. Thank you!
mp
(Sry english)

[ErrolMapham]

Hi
Can you please tell me where I can find BMW_Interface_Tester.exe Carsoft reports "Unit does not respond" I think it may be my USB/Serial Port adapter but I would like to run BMW_Interface_Tester.exe

[David Mc]

You will need to unzip the file using WinRAR https://www.dropbox.com/s/cg9tnwf5colx3jf/BMW%20Interface%20Tester.rar?dl=0

[mattburnout]

You will need to unzip the file using WinRAR https://www.dropbox.com/s/cg9tnwf5colx3jf/BMW%20Interface%20Tester.rar?dl=0 Hi David Mc, I'm post from Italy, can you help me to connect my laptop with ads\obd interface with my M3 E36? I've installed the DIS V57 but not read the ecu of the car

[David Mc]

I assume that your M3 is a Euro-spec S52 engine. Please confirm the build date of the car and I will look at the wiring diagram for the diagnostic port to determine if the issue is with your car or the interface you are using (I assume you are using an ADS interface, running in ADS mode and have disabled any antivirus software and firewalls on your laptop).

[mattburnout]

I assume that your M3 is a Euro-spec S52 engine. Please confirm the build date of the car and I will look at the wiring diagram for the diagnostic port to determine if the issue is with your car or the interface you are using (I assume you are using an ADS interface, running in ADS mode and have disabled any antivirus software and firewalls on your laptop).


M3 E36 S50B30 1993 I've a ADS\OBD interface, have a avast antivirus but is shuting off when run the diagnostic software, the same thing with windoxs xp firewall, I connect the usb \ com adaptor in the usb and I configure to result a COM1, I start virtual machine with the diagnostic software, search diagnostic >> 3 series >> E36 >>> and then all model before 1998, but the software tell me waiting and not show me any result

606543 this is my ads obd interface

[David Mc]

Matt, your car is pre-OBD 2. You can read more about accessing the on-board diagnostic system here https://www.slideshare.net/gumepesa/bmw-3-e36-series-workshop-manual-bentley-publishers (pages 50 & 51) and here http://www.pelicanparts.com/BMW/techarticles/Mult-Code_Reading/Mult-Code_Reading.htm

[90awdtsi]

Does anybody have a copy of the 10 files in crack folder? because mine only came with 4 files.

[Absurds]

Hello, recently I bought BMW E32 V12. I am restoring it and I want to have proper tool for cars electronic maintenance. I choose Carsoft 6.5 form Ebay with 20 pin and COM connection. But have no successes. The final result you can see in picture below, please help me :) : http://gemini.lt/carsoft65.jpg

[Absurds]

Hello, recently I bought BMW E32 V12. I am restoring it and I want to have proper tool for cars electronic maintenance. I choose Carsoft 6.5 form Ebay with 20 pin and COM connection. But have no successes. The final result you can see in picture below, please help me :) :

AND i believe i have wrong installation files. Can any one shere Carsoft 6.5 + SP1 + Crack? Thank you.

[ecooney]

AND i believe i have wrong installation files. Can any one shere Carsoft 6.5 + SP1 + Crack? Thank you.

I'm also after this software. I bought my M3 back after selling it over 7 years ago. I still have the diagnostic connector and dongle etc just no software.

[SWELLJILL]

i think this carsoft is a fraud. no hardware interface and they are saying it will not work with an USB interface kcan or other interface...

[cfreak]

I've got an 740i E38 1994 and an 325i E36 1992.

At first i had major issues trying to connect to my E36 but after countless of trial and error i got it to work.
Sadly i slid of the road years ago with the E38 but all is good now, besides ABS/ASC light is on. I've tried to connect to this car but it just don't work. I got a Free version Carsoft 6.5.0.6 SP1, Bought Carsoft V12, INPA, Dis, connection-cables in overflow and XP with working COM-port. The only thing i know about this E38 is that the Immobilizer has been disconnected completly by previous owner
Carsoft respond *Module does not respond* on everything. Very very soon i'll hand this thing over to someone and pay them.
I really need a expert on this issue

[chinist]

Our good friend and legendary mentor/author of this thread, I have just now learned has passed away this Feb. after a 2 year battle with cancer. sorry to hear it.

[DesktopDave]

Our good friend and legendary mentor/author of this thread, I have just now learned has passed away this Feb. after a 2 year battle with cancer. sorry to hear it.

David Mc?!? That's really sad news. RIP, he'll certainly be missed. Is there a donation thread anywhere for his family/charity/etc.?

[toybro]

I know that it does not fall out. But my problem remains unresolved. How to make extra ignition detection here?
https://imgur.com/a/daBTR11.jpg
https://i.imgur.com/hvvsmjt.jpg
https://i.imgur.com/YEK3HlM.jpg
I connect Pin 16 in ADS to Pin 6 in DB9 but still not work. Voltage on ADS 12,55V, but on left/right leg of transistors is 0,7v

[Annddrriy]

If I buy INPA cable can it communicate with all module 20pin diagnostic plug ?

[palm26]

David Mc,

is it in any way possible to repost CarSoft 5.6 and the crack? I know you posted it many years ago, but it would be a great help for me.
Cheers, Rob

[MParallel]

Our good friend and legendary mentor/author of this thread, I have just now learned has passed away this Feb. after a 2 year battle with cancer. sorry to hear it.


David Mc,

is it in any way possible to repost CarSoft 5.6 and the crack? I know you posted it many years ago, but it would be a great help for me.
Cheers, Rob

Unfortunitely, David MC is no longer with us.

RIP.

[tiMASTER]

This is sad news!

David was a huge asset to the forum and a wealth of knowledge for us all.

[BMWManiac]

I can't believe I'ved owned my E36 this long and never got around to do this, and I'm even more saddened by the fact that I've gone through most of these pages and overwhelmed by the knowledge of David and to come to the last page to see the horrible news....

Is the software available still for download from a credible source?

[george77ro]

Please upload the program. The link is no longer relevant. Thank you

[DesktopDave]

Carsoft65.zip (https://www34.zippyshare.com/v/ujWcBDem/file.html)

[tribouth]

Hello,

Link has expired, can you share the archive again?

Thanks in advance

[tribouth]

Hello Guys, any one of could help me by chance?

Thx a lot

Thomas

[udo]

You will need to PM me for the password as somone made a mess of the site by uploading about 30 files making it necessary to have it password protected.

Hi David,

can I send you a pm and you send me a zip file with a working Carsoft6.5? I need it for my e34.
timo

- - - Updated - - -

Hi dave, can you send a pm with the zip file Carsoft65.zip (https://www34.zippyshare.com/v/ujWcBDem/file.html)? Bye timo and udo.

[Annddrriy]

If I buy INPA cable and use com port 1 on Windows XP can it communicate with all module 20pin diagnostic plug ? Thanks !

[DesktopDave]

Hi David,

can I send you a pm and you send me a zip file with a working Carsoft6.5? I need it for my e34.
timo

- - - Updated - - -

Hi dave, can you send a pm with the zip file Carsoft65.zip (https://www34.zippyshare.com/v/ujWcBDem/file.html)? Bye timo and udo.

Couldn't find the file, sadly. A recent backup snafu wiped out lots of old stuff.

All is not lost, it looks like hard copies are still available on eBay. Just search for KBUS carsoft, you'll get a lot of hits. Something like this (https://www.ebay.com/itm/133982082601?hash=item1f31f45629:g:4igAAOSwb4Rh0dA 4) should do the trick nicely.

[bennyg]

The carsoft 6.5+SP1+crack archive is still up there on the high seas

Only 2 seeders so availability might be spotty
I searched a Tpbproxy list and eventually found one that wasn't a scam mirror riddled with ad redirects, used utorrent to open the magnet link, it was done in about a minute

I haven't had much time to play with it but it installed on a Win11 x64 laptop and updated ok and shows v6.5.06 within the app. All I had in the house was an obsolete PA088U based USB to RS232 adapter. I installed a win11 certified driver from a different adapter with the same internals. In the driver options (in Device Manager) I changed it to use COM1 port. I bought the "BMW compatible adapter V6.5" from eBay, it shows a green power light when plugged into 20pin port and red on the 3 KLine pins, regardless of ignition position (!)

While there are no communication error popups in the carsoft program, I haven't had any success getting a response from any module in my 1993 RHD euro 540i, I will update this post if I do.

[lennyk]

BUMP! Anyone still responding to this thread that has a copy of the Carsoft 6.5 sp1 plus crack folder that can upload it for me.. The Pirate bay torrent listing although it has 3 seeds, doesnt appear to work any longer. Thanks in advance.

[lennyk]

Update: I have Carsoft 6.5.06 running now but it’s telling a bunch of modules are not present. What could be the cause. And those that present errors it states to read error memory but I there doesn’t appear to be an option to do so unless I’m missing something here? Any ideas?