::Fitment:: 5x120.65 can it fit a 5x120

[Garrett M]

Can a 5x120.65 fit a 5x120 wheel?

[Massive Lee]

Your wheels are probably 5 x 4.75" from a Mustang or Corvette. Different hub bores and bolt pattern. No workie.

[M62pwrdE38]

There was just a thread on this like 2 weeks ago. http://forums.bimmerforums.com/forum/showthread.php?t=914579&highlight=120.65

[Mossman11]

The snow melted for a few days here so I test fitted my 17x8.5 and 17x9.5 vette sawblades on my 6'er this week and they work. They are ET55 I believe and I'm using 32mm spacers all around (the kind that bolt to the hub, and then have their own studs), that I had a machinist friend turn the outer lip on down to 70.5.

The rears fit fine actually with 255's fronts need a 3mm or so spacer with stretched 225's.

but the bolt pattern is fine, might be a little stress on the lugs but .3mm deflection aint that much, I'll let you know if any of them fall off.

[SizeItUp]

you can interchange those bolt patterns all day, as long as the offset and hub bore match. most wheels now have a 14mm hole so i will allow for the extra play. back in the day wheels only had a 12mm hole and thats when you had stud pulling problems