Removing the driver headlight assembly????

[RVAE34]

There is a black evap canister or something behind the driver side headlight assembly. It is blocking access to the rear screw that holds the assembly in place. Anyone have any ideas how to get access to this screw or how to remove the black canister with two hoses coming out the top? I tried to take a pic, but you can't see it in the photo.

[HE53]

There is a black evap canister or something behind the driver side headlight assembly. It is blocking access to the rear screw that holds the assembly in place. Anyone have any ideas how to get access to this screw or how to remove the black canister with two hoses coming out the top? I tried to take a pic, but you can't see it in the photo.

There is a 10 or 8mm bolt holding the clamp on the cannister. Loosen it a little and you can slide the cannister up and out of your way. Or.. if you have a super long screw driver you can get the screw out with that if you're good.

[RVAE34]

Great!!! thanks!!!!!

TSX retrofit this weekend.

My Prolumen 5000k H1's will be for sale if anyone wants. May trade for 3k's

I am keeping my ballasts and got the wiring harness plus Phillips D2S 5000k bulbs :)

The phillips are 35W 85V bulbs and the Prolumen ballasts are 35W 88V :)

[pgrindstaff]

I did it the hard way I guess by using a short 2 or 3 inch phillips head and worked out the hidden screws. Definitely not the easy way but one solution nonetheless.

[MaxSteel]

Yeah I had trouble with the guy when I was installing my smilies. Just used a wrench and extensions to get at the two bolts holding it to the chassis.