egebhardt
01-28-2008, 10:35 AM
Well....... I did a dumb move. I was trying to bleed my new Clutch Slave outside of the transmission housing. I pushed too much on the clutch pedal and the inners popped out. I should have bled it by hand. I've pushed really hard but have not been able to get it back in. The washer/sleeve on the outside does not look like it can be replaced. I put the old slave back in and bled it, followed by 50 clutch pedal pumps (once in the housing). The 50 pumps were necessary because these are self-bleeding slaves. At first the clutch pedal feels soft, then it got stiff, as before.
http://i185.photobucket.com/albums/x300/egebhardt_photos/ClutchSlave.jpg
http://i185.photobucket.com/albums/x300/egebhardt_photos/ClutchSlave.jpg