What tools will to change pads and rotors?

[T///MW]

Anything special beyond the obvious that any of you have found helpful?

Thanks

[BS05ZHP]

http://racepad.com/

Seems to document everything really well.

Go to the "Tech' section.

Hope this helps,

Jeff B.
95 Cosmos M3

[Jim O.]

Tools to change pads and rotors:

7mm short hex socket for caliper guide pins
6mm (or 5mm?) hex socket for rotor retaining screw
16mm socket for caliper bracket
straight screwdriver for popping off the anti-rattle spring
7mm wrench for caliper bleed screw (if you're going to bleed your brakes)
Turkey baster for removing excess fluid from the reservoir
C-Clamp for pushing piston back into caliper
Bungee cord to suspend caliper from spring
Brake bleeder (if you're going to bleed your brakes) - check out Jim Powell's instructions on how to build one at <http://www.apexcone.com/Bleeder/bleeder.html>

Jim

[T///MW]

thanks - looks like I am in good shape...

[RotaryBzzz]

Sorry to resurrect an old thread but anyone know ballpark time to do this minus shagging wheels?

On my accord, it's like 1hour/axle WITH wheel removal/mount/torque and only basic jack/jackstands (no lift). Excluding rotor turning of course.

[aaronsdropzone]

I am a tool, and I change my own brake pads...