RTABs are up next, anything else?

[IppoJ]

RTABs are next on my to-do list. Is there anything else I should do while I'm under there?
I've got ~94k now.

[SKooT1027]

Theyre a pretty direct job i felt. Hardest part is getting the old ones out. I highly recommend some kind of puller. We used a sawzall .. it was a pain.

[IppoJ]

Theyre a pretty direct job i felt. Hardest part is getting the old ones out. I highly recommend some kind of puller. We used a sawzall .. it was a pain.
I think the local CCA chapter has the tool that I can borrow.
What would you guess, 3 hour job?

[MattE30]

I think the local CCA chapter has the tool that I can borrow.
What would you guess, 3 hour job?

Less, if you have the puller and air tools. It took me about 3 hours, and I didn't have the rtab puller.

[SKooT1027]

Yeah could be significantly less with the puller and air tools. Also depends if you are going stock replacements or powerflex. I did the powerflex, they took no time at all to slide on. I think it took us a solid 3-4 hrs but we didnt have a puller and we had a problem in between so we were running to stores and such for tools that we broke

[Kaiv]

I guess the diff and rear subframe bushings would be a good idea.

There's also another smaller bushing and a bearing on the trailing arm. Haven't heard of anybody replacing those on the forums.