WTB: RMS Stage II SC Kit - OBD1 Preferred [Archive] - Bimmerforums

PDA

View Full Version : WTB: RMS Stage II SC Kit - OBD1 Preferred

Shuasha

12-19-2007, 01:54 AM

This is going on my soon-to-be 532iT.

xinline6x

12-19-2007, 04:19 AM

What is your budget, i may be able to get you one. let me know

Shuasha

12-19-2007, 10:23 AM

What is your budget, i may be able to get you one. let me know
The whole reason I want a used one is that RMS has been screwing people over left and right. If you're looking to broker for a new kit, then forget it. :)

If it's used, then the price will be dictated by the completeness of the kit. I don't need software, I'm going with NickG for that.

5150taxi

12-19-2007, 03:58 PM

I have a complete stage 2 setup, but I only want to sell the stage 1. Are you interested in a stage 1 setup?

Shuasha

12-19-2007, 04:32 PM

I have a complete stage 2 setup, but I only want to sell the stage 1. Are you interested in a stage 1 setup?
Sorry, need the whole thing. This is a daily driver so the aftercooler is a must.

Shuasha

12-26-2007, 01:01 PM

Bump!

GG///M3

12-26-2007, 03:35 PM

pm me I have a friends stage 1 sitting here he wants to get rid of.

Shuasha

12-26-2007, 06:21 PM

pm me I have a friends stage 1 sitting here he wants to get rid of.
Gotta be Stage 2, sorry. The Air/Water part is a bitch to find. :)

M3klee

12-26-2007, 10:33 PM

gg//m3 i sent u a pm im lookin for one too but for a obdII

DADx2

12-26-2007, 11:49 PM

This is going on my soon-to-be 532iT.

Are you going to try to hold out for a complete Stage II ?

I am asking because I have some RMS brackets that might be valuable if you begin to try to piece one together.

I have the plate that bolts to the head unit, the thick bar stock that bolts to the bottom, small stabilizer bracket, long allen bolts, spacers, idler pulley, 6 inch and 5.25 inch crank pulleys, and maybe a few other small things. The part I DON'T have is the arm that goes across the front from the vanos area to the top of the plate.

I would show you a pic, but I am not at home until tomorrow.

J

Shuasha

12-27-2007, 01:44 AM

Sorry, I really don't want to deal with piecing a kit together.

5150taxi

12-27-2007, 02:36 PM

How soon are you looking to get one... I might get rid of the stage 2, but I need to decide if I am going to go a different route first,...

Shuasha

12-27-2007, 03:16 PM

How soon are you looking to get one... I might get rid of the stage 2, but I need to decide if I am going to go a different route first,...
I have plenty of time.

DADx2

12-27-2007, 06:00 PM

Sorry, I really don't want to deal with piecing a kit together.

Ok, I totally understand. If I happen to see one (where you may not ordinarily look), I'll let you know.

Jim

5150taxi

12-31-2007, 06:49 PM

Ok, the time has come to sell my complete RMS stage 2 with 3K miles on everything. Pm me an offer...

I also have all my other "Go Fast" parts for sale.

RMS Headers
Full built Head (Ridiculously done, 100 X better than stage 3 vac)
Bav coils
ect...

MRMARSH

12-31-2007, 06:53 PM

i have a dinan stage 2 sitting in my room but not too sure what im guna do with it =)

Shuasha

01-01-2008, 02:50 AM