Bov Sucks! No Pphhhssstttt!!!

[izzy325is]

my fucking bov does not make the sound that everyone wants. it is working and i tried to tighten it from that screw on the top but at a idle it still leaks a little air and when i shift or let off the throttle it slowly lets the air out. any good recommendations of a loud and good bov. i know there isn't much to them but i need one that wont open until about 22 in/hg because my idle is between 19-20 so i don't want any air coming out at idle and when i let off at wot it goes down to about 27 in/hg thanks everyone

[jrhaile]

:shifty

[Geno325is]

lazer sounds

[T-Rex]

http://www.takakaira.co.jp/accessories/nightpager/nightpager.html

[Flexall]

http://www.takakaira.co.jp/accessories/nightpager/nightpager.html

Hahahhaahaaaa!!!!!! :lol Thanks for the laugh. I needed that.

Flexall :D

[5mall5nail5]

S P A C E S H I P S

[Dorito125]

who needs a bov? look at the title of this thread..

heres what you do. you hit the gas.. vrooom!! you pass some little mexican kid and you only see a blur, you hit 7k throw in the clutch and let off the gas and YELL!!

PSHHHHHHHTTTT!!

problem solved.

[Bears]

I don't know why but the title of this thread killed me... :rofl:

[M52 POWER!]

They sell ebay speaker kits that emulate this sound sir ;) Best part is you can program different PSSSSSSHHHHHT noises!!!!!!!!!!!!!!!!!!!!!!

[YellowBed]

Are you using a MAF?

[izzy325is]

dude sometimes you guys are just dicks!!! it wasn't a shitty question i was trying to find a bov that was loud. i have a turbo and bov who the hell want's a fucking speaker. yeah i'm using a maf. is there a certain one i should change to. i'm still using my stock maf from the m50. for those of you that are making fun of this thread go fuck yourself. sorry for the language but this forum is to ask questions that what i'm doing don't post just to make fun of the people that don't have as much knowledge as other people. so any REAL help thanks if you just want to talk shit then don't post it .

[Geno325is]

dont get all butthurt- need thick skin in the FI forum, get an SSQV or TYPE-s

[SiGmA]

My Tial 50mm is "loud" but not really loud. It lets people know I'm boosted for sure however. Just make sure to get a -9psi spring, I had a -11psi and experienced compressor surge and the BOV not opening on low-boost throttle release, as in when I was at light throttle, making like 1-2psi, it wouldn't open.

[izzy325is]

ight whats the ssqv i know the type s is a greddy but i don't know the ssqv. what difference will the maf make? is that something i need to be looking into?

[izzy325is]

what is your vaccumm at idle?

[7808]

your a ricer

get a dsm bov for $30

[resisTm3]

lol wow

vroooom ppsssshhhhTttt!

[JordanMD88]

Are you making enough boost to even need a BOV :) Lets see some pics :(

[Sa///M3]

:rofl PPpsshhtt! Sorry, the title is just too funny .

[YellowBed]

Bovs don't work with mafs.... You ricer :)

[JordanMD88]

Bovs don't work with mafs.... You ricer :)

shows how much you know... I think most guys on here have a MAF and a NON Recalculating BOV.... I know I do... and ALL ACTIVE AUTO KITS,TT, ICS, and TRM kits

[YellowBed]

Allot of people here put there oil drain below level, and
in an almost horizontal position too.

[e34m535t]

The difference is with a Blow through setup its cool to vent.

[gerry_miranda]

Why do you need a sound?

[Bears]

and I continue to die everytime I see this thread title :rofl:

[xcelerate]

1st of all, what kind of bov do you have? Second what is your boost? Third what's the location of your bov?

The loudest bov that I've ever used is Turboxs RFL. But now I'm using HKS SSQ, wich is also loud. But they all depends on your boost, the higher the boost the louder it goes.

The bov doesnt' really leak on vacum unless your the piston inside the bov is leaking. That's why I switch to HKS co'z its using a different set up inside. But like what I said RFL if you want a real lound one.

[JordanMD88]

The difference is with a Blow through setup its cool to vent.

Yea All of the kit's I have mentioned before are Draw through with Atmospheric vent.. :)

[Shuasha]

Yea All of the kit's I have mentioned before are Draw through with Atmospheric vent.. :)
Actually, TT or most NickG tuned setups are blow-thru.

[JordanMD88]

Actually, TT or most NickG tuned setups are blow-thru.

I stand Corrected :)

What MAF does he use the 803 or 809? For blow thru

[redlinerjetta]

If its old you may need to oil it. and adjust from soft to hard. the harder you go the harder it is to open. the softer the easier it opens. but you need to get it where it dosent leak at idle first. And make sure your boosting. no pressure no blow off.

[Kevlar]

:silly:freak

[Bigsalgt]

dude sometimes you guys are just dicks!!! it wasn't a shitty question i was trying to find a bov that was loud. i have a turbo and bov who the hell want's a fucking speaker. yeah i'm using a maf. is there a certain one i should change to. i'm still using my stock maf from the m50. for those of you that are making fun of this thread go fuck yourself. sorry for the language but this forum is to ask questions that what i'm doing don't post just to make fun of the people that don't have as much knowledge as other people. so any REAL help thanks if you just want to talk shit then don't post it .
WOW :eek:! Post some pictures of your setup! I find it hard to believe your boosting your vehicle with the Stock MAF! How many PSI are you running?

[izzy325is]

i'm boosting 8psi. i have my bov in between my fmic and my maf. like i said. it works like it is supposed to i know the power is there i just want it to be known that i have a turbo. i'll try to post pics.

[izzy325is]

http://by109w.bay109.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=1665e56a-e204-4fa2-a50d-dbde601edc0e&Aux=4|0|8CA0EA10EACB8A0| (http://by109w.bay109.mail.live.com/mail/ReadMessageLight.aspx?Action=ScanAttachment&AllowUnsafeContentOverride=False&AttachmentIndex=0&AttachmentDepth=0&FolderID=00000000-0000-0000-0000-000000000001&InboxSortAscending=False&InboxSortBy=Date&IsMessageSafe=True&MessageCodePage=1252&ReadMessageId=1665e56a-e204-4fa2-a50d-dbde601edc0e&n=1801463961)

[izzy325is]

how do i post a pic on here?

[JordanMD88]

put your link inside the brackets :)

[vazqued2]

i'm boosting 8psi. i have my bov in between my fmic and my maf. like i said. it works like it is supposed to i know the power is there i just want it to be known that i have a turbo. i'll try to post pics.

http://cgi.ebay.com/ebaymotors/2-HONDA-CIVIC-INTEGRA-TURBO-KIT-BADGE-EMBLEM-EMBLEMS_W0QQcmdZViewItemQQcategoryZ33643QQihZ023QQ itemZ360004583051QQrdZ1QQsspagenameZWDVW

[izzy325is]

what link do i put inside the brackets

[Big Bronze Rim]

what link do i put inside the brackets
The url of the pic from wherever you are hosting it. You have to host the pic somewhere, you can't just link it from your PC.

[RRdawho?]

8 psi on a stock M50 MAF? what turbo are you running?

[RRdawho?]

WOW :eek:! Post some pictures of your setup! I find it hard to believe your boosting your vehicle with the Stock MAF! How many PSI are you running?

Bout to say the same thing.

That being said, my bov opens up even if I'm just revving the engine at neutral and let the gas go a bit.

[tlmitf]

if you want the fluttering sound (puts on flamesuit) dont run a bov.

If you want a nice loud dump sound, your going to be needing to run more than 8psi.

[LeMansGTS]

i thought i was alone in the world...:stickoutt