PDA

View Full Version : Dyno Day at New England Dyno & Tuning Inc. May 3rd!!



bimmer143
04-03-2003, 10:32 AM
Well, we have setup a Dyno Day at New England Dyno for May 3rd. Anyone interested in joining us can sign up at www.nedyno.com . Just click on dyno day signup and pick the DTMPower Dyno Day!! It'll be all on video between CMT and I!!

edboc
04-03-2003, 10:42 AM
http://www.dtmpower.net/forum/showthread.php?s=&threadid=91988&perpage=15&pagenumber=1

edboc
04-03-2003, 11:26 AM
This is from Robert at NE Dyno. He posted this on the DTM thread:
okay guys I'm not registered to post on any of those other boards but if you guys can get interest on the other boards that would be great. The bigger the turn out the better its always nice to meet new people.

You can also copy this info about our dyno days.


New England Dyno and Tuning gives you the opportunity to test your car on the state of the art in-ground Dynojet Dyno.
If you can get ten people to come and confirm then we can classify it as a dyno day. We allow anywhere from 3-6 pulls and you can perform minor changes between pulls (like swapping air intakes, adjusting fuel pressure etc.. to see what makes more hp).
If you have no mods on your car this is the best time to dyno your car and get a baseline as you add mods and dyno the car again you can actually see what the gains were. Don't always believe the manufacturers claimed performance increase.
If there are 10 or more members dynoing their cars at the event the cost is $65.00 per car for up to six runs on each car, If you want to also check your Air/Fuel ratio we charge an addition fee for Wide Band O2 hookup. We throw a free barbecue (burgers, hotdogs, soda and chips) We also give you the option of driving your own car on the dyno.

We have a Nitrous Filling Station in the shop. We also offer special pricing on Nitrous on Dyno Day Events.

If you want to make an appointment for dyno tuning call or e-mail for more information. We do all tuning on the dyno we tune the following systems F.A.S.T/SpeedPro, Accel DFI, Motec, Electromotive including the TEC 2 as well as many other aftermarket system. We also can burn chips on site now.

We updated the webpage recently, check out some of the customers cars that we have dynoed.

Robert
www.nedyno.com
www.speedshop.org