View Full Version : Maxed out M Motor
KraZy007
03-08-2001, 01:40 AM
How much hp can one squeeze outta a 3.0 M3 engine? For example, a 3.0 with these mods:
Schrick headers
Schrick cams
Larger Injectors
Euro HFM
exhaust
CAI
throttle body
pulley/flywheel (one or the other)
what kinda hp/tq figures can i expect and 0-60 1/4 times? anyone got a guess?
Jimmy
C.Yang
03-08-2001, 04:56 AM
Im not exactly sure, but if I would have to guess, I'd say around 270 to the wheels.
Kritpoon
03-08-2001, 05:23 AM
Maybe around 310hp and maybe 260 ft-lb max (at the crank) ....
I have about 250 rwhp with all that you mention except Shrick headers and pulley or flywheel. Torque is at about 238 on my OBDI 3.2. No guess on 0-60...sorry
KraZy007
03-08-2001, 10:15 PM
DGM3,
You have cams too? On an odbII car? Which cams are they? Thanks
jimmy
Originally posted by KraZy007
DGM3,
You have cams too? On an odbII car? Which cams are they? Thanks
jimmy
No, he said "OBD1" 3.2..he's probably making a bit more torque than you'll be, but maybe not...he said what I would have guessed--250rwHP (I guess 245-255, depending on how good your engine is and adapts to mods). My GUESS, at stock weight and a 3.15:1 diff, is that 0-60 will be about 5.2-5.3 seconds consistently (measuring with Radar gun, not GTEC), with a quartermile of probably 13.6-13.7 seconds consistently...maybe reaching a trap speed of 102-103mph..CYA>PM3
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.