INPA 5.0.2 EDIABAS 6.4.7 register ??? [Archive] - Bimmerforums

jean019

09-15-2007, 06:55 PM

eleet

09-15-2007, 10:33 PM

This was made by some criminals who are selling the keys for hundreds of dollars.

Real version has no such buggery!

Please PM me for the crack.

jean019

09-16-2007, 09:24 AM

Thanks, new user on ecu forum ;-))))

msuwa

11-09-2007, 03:42 AM

Hi I have the same trouble running this software..

simplextibi

11-12-2007, 04:50 PM

Hey guys could someone give me also this crack

thank you

Ocha

02-14-2008, 12:36 AM

Hey simplextibi you ever get anything working on the 535?

///Criss

02-21-2008, 09:20 PM

Does this work on XP? Can I use USB to Serial on this?

KITU

04-16-2008, 03:11 AM

Hey guys could someone give me also this crack

thank you:embarrasm

MilosBMW

04-16-2008, 06:20 AM

Hey guys could someone give me also this crack

thank you:embarrasm
I have a crack and I`ll send readme how to crack.I need NCS Expert working,and some tutorial about it.PM me

ASAed330

05-23-2008, 06:33 AM

This was made by some criminals who are selling the keys for hundreds of dollars.

Real version has no such buggery!

Please PM me for the crack.

Where can I download the INPA 5.0.2/EDIABAS 6.4.7 files with the crack? Or can you provide them? Any help would be much appreciated. :thumbup:

MS54

12-16-2008, 04:19 PM

Hi Guys

I bought Ediabas INpa over the net with a license. I since changed my laptop and now the software wont work as i need another license. The problem is the supplier says they cannot help has they dont sell the software anymore. So i'm stuck with something that doesn't work after paying for it. Can one of you who offered please mail me the readme on how to crack it? I have been searching for some time now and your assistance would be much much appreciated.

Thanks!

kiran

12-31-2008, 04:07 PM

send me your e-MAIL PLEASE

power27

01-04-2009, 07:45 AM

Have you now a link for download? :)) I ordered the OBD Cable and now i need the software :)))

fileoffset

03-23-2009, 05:17 PM

Does anyone here know how to use this?

I have done a complete installation and set the settings (STD:ODB - PORT 3) and when I load Inpa it doesn't show any errors, it just flashes away (black/white upper left) and does nothing else.

Clicking on 'Script' gives me an error.

Any ideas?

vegasin00

03-26-2009, 01:53 PM

Hey guys,
I have been trying to find a working version and keep coming a cross garbage programs. Anyone have one they could share? :help

najatouma

04-04-2009, 05:43 AM

Hi,
I just got the INPA 5.0.2 EDIABAS 6.4.7, installed it, but when I start, it gives me a popup with a number, like "66E89R41", and nothing happens ...
What's the way to resgister the program ???

thanks
hi jean how are you doing I need the inpa software can you send to me
thank you
best regards
naja

Tonester

04-19-2009, 04:27 AM

I'm also looking for a good/working version of INPA.. i have the carsoft 6.5 hack but its junk.

Thanks!

airbone

04-19-2009, 08:31 PM

alpinadan

05-28-2009, 02:54 PM

Hi, could I have a copy as well please

bre

07-18-2009, 03:50 PM

Hi! Could someone please send me a link from where I can download Inpa/Ediabas including NCS Expert ?

daz123

07-23-2009, 07:45 AM

hi guys, could someone please send me a working copy and all thats needed to get the inpa software working. I already have the leads etc. Cheers.

drummrr

08-05-2009, 10:00 AM

I got the cables. Does anyone have a good link to download the software? Thanks for the help.

aise

10-10-2009, 06:26 AM

...

NOONANB

10-16-2009, 06:34 AM

Hi there I am also looking for inpa sofware any help
appreciated

rivera2669

10-28-2009, 08:48 PM

Hi I,m looking for inpa software any help. please

David Mc

10-29-2009, 04:08 AM

There is a Folder called "NCS" here http://forums.bimmerforums.com/forum/showpost.php?p=14972175&postcount=607
the word you need is INPA .

BMWsupport

11-09-2009, 03:54 PM

Ive got my package in the mail few days ago. INPA/Ediabas Cd's and cables.
The problem i'm having is that i cannot install EDIABAS.
INPA works fine, just don't seem to find install / setup file for EDIABAS software.
Who can tell me is EDIABAS compatible w win2k pro?

dankad

11-22-2009, 09:42 AM

There is a Folder called "NCS" here http://forums.bimmerforums.com/forum/showpost.php?p=14972175&postcount=607
the word you need is INPA .

Hi David,
Do you know the actual password for downloading the inpa Rar files/
Does this Inpa use the same interface as carsoft? I mean the same cables and all?

Thanks again,
Dan

David Mc

11-22-2009, 03:32 PM

You can run INPA with Carsoft cables, but will require a different interface. Read the link, then follow all the steps - you already have all the info you need.

BMWsupport

11-26-2009, 01:27 PM

Where could i download EDIABAS setup?

chris f

12-18-2009, 04:02 PM

I have EDIABAS version 6.4.7.0 which includes INPA 5.0.2.0
If anyone wants to host it, i'll post it up.

David Mc

12-18-2009, 04:11 PM

Chris, I can host it, please email me for details.

chris f

12-18-2009, 04:13 PM

Cant email you buddy, my original account was frozen so I had to recreate one, now i'm a newbie with no permissions!

you can email me at info at bmw-sport.net

ASAed330

12-18-2009, 10:21 PM

Chris f please host it up somehow. Thanks!

chris f

12-19-2009, 07:13 AM

Nearly done!

Just one more file to go, its been going really slow for some reason

Done, click HERE (http://www.bmw-sport.net/viewtopic.php?f=41&t=31)

darkislight

12-19-2009, 08:38 AM

pm me the password

thanks

ASAed330

12-19-2009, 11:07 AM

Nearly done!

Just one more file to go, its been going really slow for some reason

Done, click HERE (http://www.bmw-sport.net/viewtopic.php?f=41&t=31)

I can't pm you for the password. Those who have the password please pm me. Thanks!

dpgrand

01-02-2010, 01:15 PM

Can someone pm me the password as well?
thanks!

huttey

01-16-2010, 08:55 PM

I would appreciate the password too, if someone could PM or post it I would be eternally greatful.;)

shiipseki

01-25-2010, 07:44 PM

Could someon1 please pm me password
Thanks! :)

floashu

02-09-2010, 01:12 PM

hi.can you send me too that crack please?pleaseee
adrior26@yahoo.es
thanks

David Mc

02-09-2010, 02:57 PM

Go to the Easy GT folder on the 4shared website (as per details on page 25 of the "Carsoft Success" thread), INPA 5.02/EDIABAS 6.4.7 is there.

davidgsk

03-03-2010, 08:09 PM

Hi;

Can anyone tell me can INPA work on the latest F01,02 and F10??

thx

bookicool

05-10-2010, 02:46 AM

:help
I have EDIABAS version 6.4.7.0 which includes INPA 5.0.2.0
If anyone wants to host it, i'll post it up.

fxstsb

08-19-2010, 08:37 PM

I am new to this BMW diagnosis. I have an E66. I think I want INPA. I see 6-4.3 is out there. Will that work with my 66? Suggestions? Thanks.

IcemanBHE

08-19-2010, 11:22 PM

I think I would install INPA 3.01/Ediabas 6.4.3 and then upgrade to INPA 5x/Ediabas 6.4.7.

But....Im not sure....but you need a funky interface for the E66 to read all the modules....

and I dont know which one.

David Mc

08-20-2010, 05:51 PM

You don't need a crack for INPA, just burn the software to a disk and follow the ENGLISH SETUP.pdf.

tacairlift

11-03-2010, 09:56 PM

Could some PM me the password...Thanks

David Mc

11-04-2010, 04:27 AM

Nobody can PM anything to you until you have 10 posts and PM/email enabled.

FAL

11-06-2010, 01:31 PM

Hi;

Can anyone tell me can INPA work on the latest F01,02 and F10??

thx

Hello,

The newest INPA versions, work on the F01/F02, but i haven't had any files for the F10 yet.

Regards,
FAL

Beemer187

11-06-2010, 03:49 PM

Hello,

The newest INPA versions, work on the F01/F02, but i haven't had any files for the F10 yet.

Regards,
FAL

Can you use the ISTA/P v39 files for INPA.
I have F001, F010, F025 or are those files something else. Maybe you could add them to INPA EA-90X.

FAL

11-11-2010, 10:29 AM

Can you use the ISTA/P v39 files for INPA.
I have F001, F010, F025 or are those files something else. Maybe you could add them to INPA EA-90X.

Hello,

No, you can use ISTA-P files for updating NCS, WinKFP, etc., but as far as i know, the diagnostic .IPO files are unique to INPA and therefore can't be updated. I'm still working on it...

Regards,
FAL

jabber

01-09-2011, 05:09 AM

hi
i bought an ediabas lead from ebay the software that came with it has no install program i have downloaded a version from 4 shared but some of it is in german and it will not run all actions as it comes up with a file missing message it is inpa 5.0.2 any ideas where i am going wrong
thanks

David Mc

01-09-2011, 05:21 AM

Go back to the 4shared site, NCS folder and use the password INPA to download INPA v3.01/EDIABAS v6.4.3 and ENGLISH SETUP.pdf. Install that version, then update to v5.02/6.4.7, which is only an update version.

jabber

01-09-2011, 05:55 AM

thanks for the reply the 4 shared site i got it from has a different password can you give me the correct link or point out the post with it in
thanks

David Mc

01-09-2011, 06:12 AM

NCS folder http://www.4shared.com/dir/3U37f2mH/NCS.html (http://www.4shared.com/dir/3U37f2mH/NCS.html) password is INPA

jabber

01-09-2011, 08:10 AM

thank you for your help

BlackHawk1942

01-28-2011, 01:20 PM

Could somebody be so nice and PM me the PW for the Files hosted by "chris_f"? I really need a working EdiaBas 5.0.2 and INPA 6.4.7.

Thanks for the help!

David Mc

01-29-2011, 04:44 PM

There is a copy here http://www.4shared.com/dir/tOkwXK-l/INPAv502_EDIABAS_v647_UPGRADE_.html use help as the password.

YAH

02-13-2011, 07:03 PM

[QUOTE=kiran;15141977]send me your e-MAIL PLEASE[/Q
it is shuayah@gmail.com

jivro

02-16-2011, 01:25 AM

Hello David, thanks a lot for sharing your expertise, just downloaded Inpa/ediabas v6.4.3 ei all parts 1-3 but could not see install folder pls were could I get this install.exe. I also downloaded the update inpa 5/ and tried to use instalatoin exe file from there but getting errors.Need help.
Thanks for everything.

David Mc

02-16-2011, 02:42 AM

Download the ENGLISH SETUP.pdf and all will be revealed, the setup program for INPA is Instprog.exe but you need to do a few other things as well.

jivro

02-16-2011, 04:44 PM

Thanks
I've the English setup.pdf but missing INPA is Instprog.exe and could you suggests whats other files missing.

d4rkchocolate

02-16-2011, 07:31 PM

Thanks
I've the English setup.pdf but missing INPA is Instprog.exe and could you suggests whats other files missing.

as david clearly says in the engish pdf, u basicly, you open up the v6.4.3 in the C: drive go to install run Instprog.exe then select your language, and its self explanatory from there. :)

jivro

02-16-2011, 11:13 PM

My friend I extracted all 3 parts to c/dvive but there no install folder nor inspro.exe file, so I don't know where am going wrong only the .nrg file

David Mc

02-17-2011, 04:02 AM

After you unzip the files using WinRAR, you will see a folder named Referenz. This contains more folders, one of which is named INSTALL. Instprog.exe is in the INSTALL folder.

d4rkchocolate

02-17-2011, 10:02 AM

My friend I extracted all 3 parts to c/dvive but there no install folder nor inspro.exe file, so I don't know where am going wrong only the .nrg file

aaaaah the NRG... i had that too. what i did was use a disc burning program

like nero, or if your using mac toast titanium roxio....

then it will burn a disc image to your cd or dvd then, you can go into the referenz file and see the instalpr.exe

mpowerr

10-03-2011, 03:14 AM

NVM, figured it out...

NWFLBimmer

06-25-2012, 10:18 PM

can someone point me in the direction to down load ediabas 643 inpa 502? finding a site to download is impossible without taking the chance on a virus. So many games out there. please send me a private message.

jayster0966

06-25-2012, 11:09 PM

You can try downloading from the torrent in the thread below. It was put up by a fellow member here on the forums and the programs do work.

http://forums.bimmerforums.com/forum/showthread.php?t=1852196

iyad

06-10-2014, 03:25 AM

hi i want the crack for inpa please?ليس لهذا الموقع تقييم