PDA

View Full Version : WTB GT Splitters


JLac
03-12-2003, 11:06 PM
Does someone have some GT splitters they want to sell?
The splitters that look like this guy's

http://www.geocities.com/marsfire0/pics/05.jpg
GotMpwr
03-13-2003, 01:17 AM
Autovogue sells these GT Splitters for $99.00 USD shipped! I believe you can contact Vic@MMS-Tuning for these products, since he is a Autovogue US dealer.

Hope this helps!
JLac
03-13-2003, 01:51 AM
Thanks a bunch!
Drea///M3
03-13-2003, 10:00 AM
Hey tahnx! I wonder if BGM3 saw this?
BGM3
03-13-2003, 12:23 PM
What material are they made of? If they are plastic than that's great!
Drea///M3
03-13-2003, 12:47 PM
Hey I'm looking into it....Waiting for a reply ..But if yours are of good quality and are a bit lower and about the same price or cheaper(The AutoVogue ones are ~$100-$140 a set, waiting for an answer as well on price), then I'd rather give a fellow board member my money.
alexd
03-13-2003, 02:05 PM
Not to mention I will be covering some in CF as well!!! ;)
Drea///M3
03-13-2003, 02:44 PM
You're killing me Alex!!!! I think I've turned into a CF junkie!

BTW, you should get the collar by Fri. He sadi he fabricated the box himself and it will hold up a 10 year old...You got any 10 year olds to try out his claim? I wanna see this box of his...Are ya gonna use it to send the collar to me? Thanx man!
Drea///M3
03-15-2003, 11:07 AM
Update..The Autovogue ones are made of fibreglass..
FredS
03-15-2003, 03:32 PM
How can I get a hold of Autovogue ?
JLac
03-15-2003, 03:38 PM
I tried to email the autovogue guy and its been five days and still no response. Is there any other way to get a hold of autovogue or an autovogue rep?
GotMpwr
03-15-2003, 04:22 PM
Here is the email from Autovouge.

Hi Sir,

The parts are not original they are made for us, out of Reinforced Fibre
Composite.

You can place the order over the E-mail but there is always a risk of
someone picking up your credit card details. It may be best if you want to
place the order to call me and place the order over the phone.

If you require any further assistance please do not hesitate to contact me
on the numbers below.

Kind regards,

Craig Walker
Senior Sales Advisor.

------------------------------------------------------------------
Autovogue UK Ltd.
Autovogue House
Unit5,
St. Albans Road,
Common Road Industrial Estate,
Stafford.
ST16 3DR.

Tel :- +44 (0) 1785 220101
Fax :- +44 (0) 1785 227102
Email :- sales@auto-vogue.fsnet.co.uk
website :- www.autovogue.com



Thanks for the recent enquiry.

The total cost of the corner splitters delivered to you would be £89.00,
delivery of these parts would be 7-10 days from receipt of the order.

If you wish to place the order please contact us so we can make some further
arrangements.

If you require any further assistance please do not hesitate to contact me
on the numbers below.

Kind regards,

Craig Walker
Senior Sales Advisor.

------------------------------------------------------------------
Autovogue UK Ltd.
Autovogue House
Unit5,
St. Albans Road,
Common Road Industrial Estate,
Stafford.
ST16 3DR.
Drea///M3
03-15-2003, 05:31 PM
Hey he quoted me a price!!!! The last time I looked NJ was closer to the UK than CA!!!!
JLac
03-16-2003, 10:00 PM
Since everyone wants these GT corner splitters, i wonder if we could all get a group buy on these. Someone ask around!
Drea///M3
03-16-2003, 10:04 PM
I'm holding out for BGM3's corner splitter replicas to come out...his will be made of ABS plastic which should be much more durable than fibreglass..
JLac
03-17-2003, 01:39 AM
Wait, BGM3 is selling his splitters or is he a vendor thats selling multiple splitters? How much would they run for? And could you get some pictures of his splitters?
alexd
03-17-2003, 07:39 AM
Anson-got the collar, it is in tact. Sunroof switch panel and glove box piece are almost done, they looks sweet as hell. I will send all pieces back in a box that will protect them very well. His box was very sufficient. I am already a CF junky!!!

BGM3 is fabricating them, he has a friend that is making them out of ABS. They will be the shit.

What is the status of these anyway?? Roman, give me a call when you can.
positivepower
03-17-2003, 08:07 AM
what is a splitter and what do they look like Pix?
BGM3
03-17-2003, 12:48 PM
Hey Guys,

All the information you need can be found on this thread:
Thread (http://www.bimmerforums.com/forum/showthread.php?s=&threadid=78152&perpage=25&pagenumber=1)

I'd like to post all updates there because this forums is more of a sales forum. So tune to that channel for all updates :D

In short the splitters I'm making are ABS and will also be available in carbon fiber(thanks Alex), will mount to stock mounting points and will require no additional modification.

positivepower - Splitters are two pieces which mount on the right and left side of the lip spoiler (the black piece on the bottom front of an M3 bumper). They help with down force and look cool.

Thanks Guys! :buttrock