justaddcoffee
08-30-2007, 10:08 PM
hey, i was considering a set of 5mm spacers, but since they aren't deep enough to be hubcentric, i'm wondering if anyone make thinner spacers, like 3mm, so the hub is still exposed enough to mount the wheel properly.
the 255s on the rear are running maybe a millimeter (at best) away from my exhaust and suspension. problem is that a solid set of 10mm would move the tire too far out, and it would rub. 5mm would fit, but only if i switch to wheel bolts which don't center the wheel very well by themselves. so i'm hoping to find some smaller spacer.
anyone?
the 255s on the rear are running maybe a millimeter (at best) away from my exhaust and suspension. problem is that a solid set of 10mm would move the tire too far out, and it would rub. 5mm would fit, but only if i switch to wheel bolts which don't center the wheel very well by themselves. so i'm hoping to find some smaller spacer.
anyone?