PDA

View Full Version : 93 325is sputters at mid to high RPMs???



NAZ1998BMWM3
08-20-2007, 01:39 AM
My friends 93 325is sputters from about 2000 RPMs up, Its not to bad just alittle powerless when this happens. Its sortof a off on type of thing, doesn't happen all the time just every now and then, you know what im sayin.

Parts replaced:
knock sensers
coils
hot temp senser
plugs about 6 months ago

what the hell is wrong with this car, it was like this before I sold it to him a year ago.

Im thinking it might be the injectors as I think there the ones it came with from the factory.

172K miles on the clock



thanks!

thenewBMWguy
08-20-2007, 01:52 AM
i dont know what you mean by sputters, be more specific.

but my car (randomly) kind of gives out at like 3000RPM. it feels like it stops, and then not even a second later it goes all out again, its wierd. is that kind of what you are talking about. i have an autotragic too so thats probably my problem.

schwarzlle36
08-20-2007, 03:04 AM
i have a similar problem but only when my car is cold. it sputters from 1.5-2k rpm. I have replaced the knock sensors, camshaft sensor, crank sensor, air temp sensor, coolant temp sensors, plugs, coils, cleaned icv vavle, cleaned injectors. Seems like the only thing I havnt done is change the maf, this is a $330 part so if that doesnt work i might drive my car off the cliff

BR Random
08-20-2007, 10:16 AM
Cam Shaft position sensor( I think thats what it was called). Cylinder shapes thing left of the oil filter case. check the wires to it. That was my problem. the wires broke. Caused a jerk/loss of power at about 3-4k rpm.

axthrower
08-20-2007, 10:36 AM
bad MAF, cracked intake book, vacuum leak?

BR Random
08-20-2007, 10:37 AM
Take your pick

NAZ1998BMWM3
08-20-2007, 03:07 PM
I'll have to check the cam senor, the MAF was just changed, and I already told him to change his intake boot cuz it is cracked alittle around the vac lines.

Christina3575
08-02-2011, 01:26 AM
My car does the same thing but to add to it, it randomly jolts. I've changed to MAF and nothing, changed the injectors, nothing. I DONT KNOW what to do! HELP?