PDA

View Full Version : intake close ups



ELIBEEMER
08-06-2007, 12:31 PM
just doing some research...

anybody have any CLOSE UP shots of the EURO Air Injection Rail that attaches to the EuroTBs?

I have been looking at realoem.com shots..and id just like to see some real actual pics......
http://www.realoem.com/bmw/diagrams/h/f/7.png

Thanks in advance

Thewiseguy
08-06-2007, 01:04 PM
just doing some research...

anybody have any CLOSE UP shots of the EURO Air Injection Rail that attaches to the EuroTBs?

I have been looking at realoem.com shots..and id just like to see some real actual pics......
http://www.realoem.com/bmw/diagrams/h/f/7.png

Thanks in advance

b30 or b32? what motor is that in you sig? Its got euro intake plenum but a us valve cover.

ELIBEEMER
08-06-2007, 01:04 PM
3.2l plis

BSH
08-06-2007, 02:48 PM
It looks like the OP is retrofitting the euro ITB's to a US motor.

morerevsm3
08-06-2007, 08:19 PM
you may find this helpful
http://forums.eurocca.net/showthread.php?t=11535

ELIBEEMER
08-06-2007, 09:11 PM
yes im post #147...

gobuffs
08-06-2007, 09:41 PM
Not sure what air injection you are talking about.

Are you running aftermarket engine management?

Mpowered02
09-02-2007, 11:19 PM
I have the piece you are looking for with the rest of my ITB parts at work. When I go back on Tuesday, i'll try to click a pic and post it. Anything in particular you're looking for for that part? It basically presses into the ports on the ITB's (sealed with orings) and has a larger port directed downward (between cyl's 3&4) for idle control, a smaller (vacuum line size) port for the fuel pressure sender, and a port on the side of the manifold for the brake booster line. Let me know specifically what you are looking to see and I can try to take pics tailored to what you're looking for...