Looking for Euro

[Ant118]

Where do you guys find these motors. Im looking for either a S50B30 or S50B32 with or without tranny's. I would like the 3.2 over the 3.0 but im not picky. Ive been looking on www.mobile.de (http://www.mobile.de) and www.autoscout24.de (http://www.autoscout24.de) for a while and im not really finding anything.

[gobuffs]

http://abloriginalparts.com/

[NAZ1998BMWM3]

Heres a link to a place that looks like there know what there doin! rebuilt race engines start at 14,500! but you can get one with 20-40k on um for as low as $6,500........


http://www.bimmerworld.com/html/e36-m3-euro-32l-engine-package.htm



The ultimate E36 engine from the Evo M3. This engine makes 321Hp and 258 ft-lb of torque from the factory with stock reliability. These engines are sold complete with Euro headers, 6 throttle body intake, and all electronics. Most of our engines have 20,000 to 50,000 miles, but we have had some with as few as 4,000. Fits all E30 and E36 cars, prices start at $8,000. TECH NOTE - These cars came with an updated drive-away theft protection system, consisting of a specially coded key and various electronics to prevent operation without this key. This system is easily swapped into 95 production date and newer E36 cars if the correct parts are provided, but can be difficult to transplant into older models. We can provide additional parts to circumvent this system and make installation plug and play. Please email or call to purchase one of these engines. There are several compatibility issues involved. We want to work with you to make sure you have the correct parts for your car, so we do not have this package available for online ordering. All of our Euro engines come from left-hand drive cars so you don't have to spend $1,000+ on a RHD engine harness and related parts.

there ya go dude, theres alittle from there web site, check it out!:)

[JamesM3M5]

Got mine from James at Bimmerworld years back, couldn't be happier. Since then I've tracked it a bunch and changed the rod bearings and oil pump (VAC upgrade). Very torquey, very powerful, STOCK driveability and reliability. No fussing with cams, manifold upgrades, oil pump/oil pan/oil cooler upgrades, etc etc on US motors and then having to deal with tuning and driveability issues once you get all those parts bolted on.

[byl]

I know of a B30 with approx 70k on it for $2.5k but need some bottom en work, nothing major, pin wrist (something like that) and bearing shell.

[Thewiseguy]

As much as I like the guys at bimmerworld, I recently got a motor from Alex Lipowitch from ALBoriginalparts.com. I couldnt be happier!