FS: PERFECT StopTech 332mm Front BBK...Red, Drilled Rotors, Stainless Lines, Axxis Pa

[RJM5]

Selling the Big Brake Kit off of my 330i ZHP...

StopTech 13" 332mm BBK

ST-40 4 Piston Calipers in Red
332x32mm Drilled Floating Directional Rotors - 2 Piece
Stainless Steel Lines
Axxis Ultimate Pads
Rotors have no warpage, lip, etc...perfect and show little to no wear whatsoever!
Less than 10k miles..these brakes are as new!
StopTech says they only fit 330i/ci's...but many people run them on 323/325/328s with 17" or larger wheels.
Original List Price $2095!

[RJM5]

For some reason I can't attach or insert pictures!!

PM me for many pics...

[osborni]

not enough posts. Use something like photobucket.com

[RJM5]

I have them hosted on another site already..

Looking for $1400 btw...

[RJM5]

Now on eBay, Item number: 280129974123.

Thanks,
Ray

[xinline6x]

is this the same caliper used on e36's? is it possible to buy just a different bracket from brembo to fit the e36?

[RJM5]

Yes, it is the same ST-40 caliper. If you call StopTech they always say it is impossible to fit the kit from one vehicle to another, but I'd imagine you can get different carriers and be good to go...

-Ray

[DTM325]

it should work.....the e46 330 is a direct bolt on.

[RJM5]

it should work.....the e46 330 is a direct bolt on.

There we go! Thanks for the info....

[DTM325]

i said SHOULD....

with that said i might be intrested.....:devillook\

shoot me a pm with price shipped.

~Chase

[SG_M3]

it should work.....the e46 330 is a direct bolt on.

for a 3 series kingpin, not the M3 kingpin. You'll need m3 specific brackets if you want to fit them to m3 king pins.

[DTM325]

for a 3 series kingpin, not the M3 kingpin. You'll need m3 specific brackets if you want to fit them to m3 king pins.

my car's non-m...so then it "should" work? or do the ZHP uses m3 kingpins?

[RJM5]

Pics added^

[farzad97m3]

are these still for sale?