BimmerPerfStore
06-22-2007, 01:44 AM
We are proud to introduce the new Rogue Engineering E46 M3 X-Pipe exhaust midpipe. A perfect compliment to the E46 M3 Rasp Pipe and El Diablo exhaust system.
This soon to be released section 2 midpipe for the E46 M3 will include their exciting optional new EVC Sound Control Valve. NOW you can have that exotic sound were previously only found in systems that cost in excess of $5,000 for about 1/2 the cost!
https://www.nexternal.com/bimmer/images/reevcmidpipe-350.jpg (https://store.nexternal.com/bimmer/images/reevcmidpipe-800.jpg)
Click for a larger image
Click here (http://store.bimmerperformancestore.com/Product479) for the RE Section X-pipe in our online catalog.
OK...SO WHEN CAN I HAVE ONE???
Limited Production
We anticipate delivery of the X-pipe to begin late August 07. WE WILL ANNOUNCE WHEN WE CAN START TAKING PRE-ORDERS. Preorders will get first priority in shipping after arrival, and it's likely this exciting new product could be sold out before they even arrive.
WHY ORDER FROM BIMMER PERFORMANCE STORE?
Our advanced order management system allows us to authorize your card ONLY and reserve your product WITHOUT charging your credit card. That means you will NOT be incurring credit card interest or be forced to pay for your RE X-pipe months before you receive it. Authorizing your card does reserve the credit for the transaction, but your card won't be charged until it's time to prepare for shipping.
OK...tell me more about this new X-pipe!!
X Marks the Spot
We're excited to finally release information on our much anticipated Section 2 X-Pipe for the E46 M3. Like all RE products, we wanted to ensure that our new section 2 x-pipe was both high quality as well as functional.
Whereas the factory section 2 utlitizes two 60mm diameter tubes, with a "H" crossover and small resonator, the RE X-pipe maximizes gas velocity by merging the two smaller tubes into one larger 76mm tube before splitting back into two before the rear muffler. This efficient system allows for gas velocity to equalize from cylinders 1-3 and 4-6, before entering the muffler chamber. This exhaust merge improves sound as well as gas velocity.
Look! It's magic!
As an added feature, we've incorporated an external "dump" at the end of the X-pipe for total user controllable sound. The optional EVC valve allows the user to control the exhaust sound from stock (completely closed) to racebike loud (completely open) from within the inside of the vehicle. It takes only 5 seconds to fully open to fully closed.
Rogue Engineering X-Pipe Section 2
The RE X-Pipe is made to fit exactly like factory. Features of RE X-pipe include:
Weighs only 12 lbs. with included blockoff plate (factory is 22 lbs.)
Optional Electronic Valve Control (EVC) valve allows for user controlled exhaust sound levels with touch of a switch
100% T-304 stainless steel, full TIG welded construction.
Will not change ground clearance
Will not void factory warranty
Will not affect emissions
No permanent modifications required for installation
EVC Kit
The optional EVC sound control kit includes the following:
EVC Valve (6061-T6 Aluminum body and plate, stainless steel butterfly/shaft,High Temp Steel Gears)
Custom wiring harness, specifically designed for internal console mounting in E46 M3
Custom momentary rocker switch
Stainless steel downturn exhaust tip (diverts exhaust gases towards the ground)
Completely produced in the US (warranty information about the EVC valve to be posted)
This soon to be released section 2 midpipe for the E46 M3 will include their exciting optional new EVC Sound Control Valve. NOW you can have that exotic sound were previously only found in systems that cost in excess of $5,000 for about 1/2 the cost!
https://www.nexternal.com/bimmer/images/reevcmidpipe-350.jpg (https://store.nexternal.com/bimmer/images/reevcmidpipe-800.jpg)
Click for a larger image
Click here (http://store.bimmerperformancestore.com/Product479) for the RE Section X-pipe in our online catalog.
OK...SO WHEN CAN I HAVE ONE???
Limited Production
We anticipate delivery of the X-pipe to begin late August 07. WE WILL ANNOUNCE WHEN WE CAN START TAKING PRE-ORDERS. Preorders will get first priority in shipping after arrival, and it's likely this exciting new product could be sold out before they even arrive.
WHY ORDER FROM BIMMER PERFORMANCE STORE?
Our advanced order management system allows us to authorize your card ONLY and reserve your product WITHOUT charging your credit card. That means you will NOT be incurring credit card interest or be forced to pay for your RE X-pipe months before you receive it. Authorizing your card does reserve the credit for the transaction, but your card won't be charged until it's time to prepare for shipping.
OK...tell me more about this new X-pipe!!
X Marks the Spot
We're excited to finally release information on our much anticipated Section 2 X-Pipe for the E46 M3. Like all RE products, we wanted to ensure that our new section 2 x-pipe was both high quality as well as functional.
Whereas the factory section 2 utlitizes two 60mm diameter tubes, with a "H" crossover and small resonator, the RE X-pipe maximizes gas velocity by merging the two smaller tubes into one larger 76mm tube before splitting back into two before the rear muffler. This efficient system allows for gas velocity to equalize from cylinders 1-3 and 4-6, before entering the muffler chamber. This exhaust merge improves sound as well as gas velocity.
Look! It's magic!
As an added feature, we've incorporated an external "dump" at the end of the X-pipe for total user controllable sound. The optional EVC valve allows the user to control the exhaust sound from stock (completely closed) to racebike loud (completely open) from within the inside of the vehicle. It takes only 5 seconds to fully open to fully closed.
Rogue Engineering X-Pipe Section 2
The RE X-Pipe is made to fit exactly like factory. Features of RE X-pipe include:
Weighs only 12 lbs. with included blockoff plate (factory is 22 lbs.)
Optional Electronic Valve Control (EVC) valve allows for user controlled exhaust sound levels with touch of a switch
100% T-304 stainless steel, full TIG welded construction.
Will not change ground clearance
Will not void factory warranty
Will not affect emissions
No permanent modifications required for installation
EVC Kit
The optional EVC sound control kit includes the following:
EVC Valve (6061-T6 Aluminum body and plate, stainless steel butterfly/shaft,High Temp Steel Gears)
Custom wiring harness, specifically designed for internal console mounting in E46 M3
Custom momentary rocker switch
Stainless steel downturn exhaust tip (diverts exhaust gases towards the ground)
Completely produced in the US (warranty information about the EVC valve to be posted)