View Full Version : WTB 4 bolt M3 driveshaft
Mark Francis
02-01-2003, 10:50 AM
Im looking for a 4 bolt M3 driveshaft from a 5 speed. Please email me at mark.francis@epinei.com Thanks!
Mark Francis
02-02-2003, 08:12 AM
Bump
332 RustBucket
02-02-2003, 12:14 PM
sent email
ClubSport332ti
02-03-2003, 06:13 PM
I need a 4 bolt 1997-1999 ///M3 driveshaft too
Mark Francis
02-03-2003, 06:16 PM
The 1997-1999 M3's have the 6 bolt driveshaft with the joint at the back. I have one for sale for $175 if you are interested. The 4 bolt is from a 1995.
ClubSport332ti
02-03-2003, 07:25 PM
I am totally confused now. Everyone says I need a 4 bolt to match a 4 bolt differential that is on all ti's, M coupes, Z3's and e30's. Which side are you talking about that has the 4 bolts? Can you take a picture for me please. What year is your car? You have a 1997-1999 drive shaft for sale? I am assuming you need a 95 driveshaft right? And you purchased a 1997-1999 drive shaft????
ClubSport332ti
02-03-2003, 07:40 PM
Mark I think you have it backwards, 4 bolts are from 1997-1999. What year is your car? Also why do you need a 6 bolt flange? thanks
Mark Francis
02-03-2003, 08:48 PM
I have a 6 bolt driveshaft that will not work with my 4 bolt diff. The car has a M3 gearbox (5 speed) with a 4 bolt M3 differential with a quaiffe. I thought I needed just a normal M3 driveshaft and I didnt know that there was a differance. I also have an M3 street car (1997, M3/4 5 speed) that has a 6 bolt differential. I lookes at it just to see. I just bought a 1995 driveshaft from an M3 5 speed that is a 4 bolt. When I say 4 bolt, Im talking at the diff. They are all 3 bolt at the trans but the M3 is a bigger bolt circle than a 325. So now I have what I need but I have an extra M3, 6 bolt driveshaft.
Mark Francis
02-03-2003, 08:55 PM
Oh yea, you asked why I needed a 6 bolt flange, thats because I could have put it on the diff Im building and used my 6 bolt driveshaft.
Mark Francis
02-03-2003, 09:02 PM
Hi again Compact,
Did you put in an M3 trans or a 325 trans? I also have an extra 1995 325 driveshaft available. Thanks!
ClubSport332ti
02-03-2003, 09:54 PM
I have a ///M3 ZF transmission. My Differential input flange is 4 bolt. So I definately need a 4 bolt driveshaft. Thanks, Mark
tonym
08-18-2005, 06:24 PM
I have one if you haven't found one yet!
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.