PDA

View Full Version : M50 Motor + Tranny



BimerTunerz
03-13-2007, 01:04 AM
Hey i have a 1993 325is that was totaled recently, looking to sell the motor/tranny, hopefully maybe even the rolling chasis with driveline.. anyone doing a swap?
Motor's got 131K on it, but its pretty well known what that means for a bmw.. not much.. A few months ago i rebuilt the head, new valves,seals,etc. Compression's even all the way across (not sure the poundage, but if anyone really wants to know i can check). No oil leaks,doesnt burn any either..
Transmission is the GETRAG, fluid changed regularly, all gears are smooth and no effort shifting... Diff's stock, maintained well too.
Anyone lookig for a swap PM me give me an offer
Thanks

Flavcool
03-13-2007, 01:08 AM
Too far away for the motor, but how are the kidney grills? Are they the 92-95 fitment with the 96+ look? Foglights and foglight wiring?

BimerTunerz
03-13-2007, 01:54 AM
nah they're stock 92.. body shop replaced them a while back.. and only one survived the accident.. Got the fogs,brackets.. Wiring's good except it needs new receptacles.. otherwise intact

Flavcool
03-13-2007, 02:03 AM
nah they're stock 92.. body shop replaced them a while back.. and only one survived the accident.. Got the fogs,brackets.. Wiring's good except it needs new receptacles.. otherwise intact

What are the receptacles? All I know is that behind one of my foglights, the wire is cut and dangling, behind the other, no wire at all.

BimerTunerz
03-13-2007, 02:05 AM
the plugs that connect to the foglight itself.. Im guessing in your case this wouldnt work, more like if you had a totally bad harness.. My plugs are corroded.. :(