New lip: Reiger Cup lip w/ pics (nothing big :/)

[chr328is]

I broke a velocity splitter so I replaced those with an authentic Reiger Cup Lip (fake m3 gt or m3 ltw lip).

No one, ABSOLUTELY NOBODY, has these in stock but namotorsports dot net have them BARND NEW for only 189 (cheaper than anyone else has these lip ON SALE!

anyway, the same day I changed my oil, replaced my power steering hose, replaced the fittings on the hose next to it, cleaned my knn air filter, and drained/ changed my ATF fluid. so...

before
http://i14.photobucket.com/albums/a301/chr328is/akljdshf009.jpg

after
http://i14.photobucket.com/albums/a301/chr328is/akljdshf019.jpg

http://i14.photobucket.com/albums/a301/chr328is/akljdshf013.jpg

http://i14.photobucket.com/albums/a301/chr328is/akljdshf018.jpg

and yeah, asa ar1's with BBS caps :/

[JayB]

Good luck with yours...mine lasted all of..................... 1 day before I ripped it off.

[///M3Augy]

Looks great.

[mikese36]

Looks Nice!

[BMWALDO]

Hope you attached that tough.

Goodluck and I hope it lasts you a decent amount of time.

[GrieverM3]

looks hot ! :eyecrazy

[persian prince]

sweet

[BrodsterM3]

do you mind if i copy you???

lip and wheels.

[dynamik]

do you mind if i copy you???

:lol

[Bsaint]

wow those brakes look so small lol lip looks good tho

[fast1]

What reiger part number did you order?

[///Mitch3]

Sexual car. :thumbup:

[yod88]

nice
what suspension are you running?

[jszy25]

I love the 3rd picture, your car looks awesome.

[The-Great-328ic]

good luck with it

[Dino Antonov]

looks good

[Momikey]

Hey where did you get you're bumper, mirrors from the GB. Also what size are the wheels they look nice.

[Vaders]

That looks really nice! I hope you can manage to keep it in good shape.
I know that between speed bumps and being forced to enter driveways fast sometimes, (to avoid being rear-ended) would be the end for me.

[NSR AJ]

mine is pretty tough im sure if you installed it right it will be too

[Steinkek]

i just put mine on last week. i love it. i have not ripped it of yet!!!!

[NAMotorsports]

Thank you for the order, the car looks great! Who did the paint for you?

[///Mik3]

If you didn't already do this, i would actually remove the front bumper and install it using actual nuts and bolts w/ as wide a washer you can. When i first installed my ltw lip extensions, i originally just used the little clips that hold the oem lip in place. Yeah that proved to not be nearly strong enough. I later replaced them w/ bults/washers/ and nuts. This proved to be completely sturdy. They weren't going anywhere after that.

This would be your best bet to make sure driveways, speed bumps, parking blocks, and debris in the road don't rip that thing off, sending it right under your tires.

Looks good though. I'm definitely getting myself one whenever i get my next e36 M3.

[alkumaish]

sexy, but I wouldn't install one those because of the _evil_ speedbumps here :(

[SebsBlackBimmer]

If you didn't already do this, i would actually remove the front bumper and install it using actual nuts and bolts w/ as wide a washer you can. When i first installed my ltw lip extensions, i originally just used the little clips that hold the oem lip in place. Yeah that proved to not be nearly strong enough. I later replaced them w/ bults/washers/ and nuts. This proved to be completely sturdy. They weren't going anywhere after that.

This would be your best bet to make sure driveways, speed bumps, parking blocks, and debris in the road don't rip that thing off, sending it right under your tires.

Looks good though. I'm definitely getting myself one whenever i get my next e36 M3.

This guy speaks the truth. Thats how Im running mine currently, and that thing isnt going anyway. Its also tough a nails. Ive had mine for about 6 months. As long as your careful and always....ALWAYS concious that you have a lip that low you'll be fine.

[HulkManJ99]

looooks gooooood!

[E36 PWR]

drive careful

[urban328is]

looks good.
btw 99.9% of people, meaning everyone but bf.c guys will never know those aren't bbs lol.

[99CosmosM3]

Looks really good

[chr328is]

What reiger part number did you order?

From namotorsports dot net the part # is RI49018. But some companies have it listed under just 49018, but those companies dont have it in stock though, and sell it for more- Trust me I tried everywhere


do you mind if i copy you???

lip and wheels.

dude, I copied like 50% of everyone here. No one cares, and if they do :stickoutt


looks good.
btw 99.9% of people, meaning everyone but bf.c guys will never know those aren't bbs lol.

haha. I know, half of the forums have AR1's anyway


mine is pretty tough im sure if you installed it right it will be too

I did. I used all the screws/ washers/ clips (like 16 of em) that it came with, along with the metal support bar. I had the car on ramps/ jack stands anyway cuz i changed my oil and powersteering hose


Thank you for the order, the car looks great! Who did the paint for you?

No paint. You guys provided a quality reiger product which matches the stock m3 lip, mouldings perfectly.

and thank you guys for the free 1 day shipping, and all yur help.

[dynamik]

what is this made out of? abs? or fiberglass

[chr328is]

what is this made out of? abs? or fiberglass

abs, its a real reiger peice

[dynamik]

abs, its a real reiger peice

you got it painted?

[urban328is]

you got it painted?


No paint. You guys provided a quality reiger product which matches the stock m3 lip, mouldings perfectly.

and thank you guys for the free 1 day shipping, and all yur help.

;)

[ZbmwR]

looks great!

[Naw T 3]

Best lip ever. Mine lasted over 1year before i sold my car. Looks great!

[NAMotorsports]

We have plenty of these in stock so if you want to order, just follow the link below!

http://www.namotorsports.net/detail.cfm/part_cd/RI49018 - Rieger BMW E36 M3 GT-Look Spoiler lip - $189.98 plus shipping

This part can be painted as well as shown in the picture.

[russiamutha]

are those 18s?

[marcus3]

looooks gooooood!

Very gooooooood :buttrock

[TehPandaShow]

Ohoh...

[bb0ytom]

you know what you should do with the lip? go buy some fiberglass cloth and fiberglass resin and line the inside of the lip w/ 1-2 layers of the cloth and resin. it will become a little heavier, but much more studier. I did this to my lip when i first recieved it because i thought it felt rather flimsy and soft, and it's been holding up great since. my car is relatively slammed as a Daily driver as pictured in my sig. that's just my 2 cents.

[cooljess76]

Does anyone know if it would be possible to slightly modify this thing to work without the OEM lip? My car is pretty low as is and if I were to mount it to the factory lip it would only be 1" from the ground.

[xjeeper]

Yeah, could this work with the factory m3 lip removed??

Also, can you feel any difference in stability at higher speeds? Can you tell it is on there and functioning?

[spare]

Very tough looking, looks great :)

[Citizen328ci]

i like it, becareful you dont rip it off!