Matt Kern
02-09-2007, 11:53 AM
We have a special offer that I would love to extend to our customers today. In doing some house cleaning, we realized we still have 3 Lunar L1500 amplifiers. These amps retail for $489.95, which is $120 OVER the retail price of our BSW 300.2 amplifier. In order to clear these out, I would like to extend an offer to anybody who is interested in one of our dual 10" subwoofer systems. The first 3 people who call to place an order for a dual 10" subwoofer system may substitute the Lunar L1500 500 watt rms amplifier at NO ADDITIONAL CHARGE!!!
If you are a bass head and want to wake the dead, this setup is going to be right up your alley! This amp is simply amazing in both power and quality. If any of you have ever heard of Lunar amplifiers, then you know what I'm talking about. Lunar amplifiers are hand-built by the same engineer that designed the famous 'old school' Rockford Fosgate amplifiers of the 80's and early 90's, such as the Punch 150, etc.
Lunar L1500:
1 Ohm Mono 500watts x 1
2 Ohm Mono 315watts x 1
4 Ohm Mono 125watts x 1
Over Current Shut Down
Over Temperature Shut Down
SPL Data Input Equipped
Can Be Used As Master Or Slave Unit
0-180 Phase Selectable
LUNAR Exclusive Frequency Compensated Self Exciting Pulse Width Modulated Output Circuit For High Effeciency And Outstanding Sound Quality.
Cone Compensating Circuit Controls Cone Movement As Low As 5hz.
Fuse: 70 amp
Measurements 3.5"x10"x5"http://i177.photobucket.com/albums/w203/BavSound/Lunar1.jpg
http://i177.photobucket.com/albums/w203/BavSound/Lunar2.jpg
http://i177.photobucket.com/albums/w203/BavSound/d210basspackage3.jpg
http://i177.photobucket.com/albums/w203/BavSound/d210basspackage2.jpg
http://i177.photobucket.com/albums/w203/BavSound/d210basspackage1.jpg
Patented,Three Surface, Forced Convection Cooling System
Thermostat controlled fan moves cool air around the internals of the Amplifier, then forces the air over two layers of the heatsink.
Patented, Two Piece Heatsink
Maximum heat dissipation due to the large surface area of the upper and lower heatsink.
Adjustable, Chip Programmable Crossover
The Amplifiers are supplied with 88hz low pass and 106 hz high pass chips in the crossover. Mono Blocks are supplied with 88hz low pass chips. These frquencies can be adjusted by changing the chips inside the Amplifier to fit your needs.
Double Sided FR4.062 Epoxy and Fiberglass Circuit Board
The circuit board is very durable and able to tolerate abuse and high temperatures.
22 Kohm Input Impedence
Compatible with all head units that have RCA outputs. This impendence is easily driven by head units with low voltage outputs.
High Temperature Low Impedence Filters
Primary power supply filtering is accomplished by using these high quality filters.
Proven Through Hole Technology
All holes are plated through which maximizes connections between components and circuit board.
Heavy Duty Output Devices
Output Devices are a common failure in most units. LUNAR uses the heaviest (TO-247) output devices on the market to eleminate this common failure.
Discrete Gain Controls
Each channel has a dedicated gain control to insure proper balance.
Low Resistance Active Global Feedback
This eliminates unwanted movement of the speaker cone. (CONE CONTROL MEANS BETTER SOUND!)
Designed and Manufactured in the U.S.A.
All Amplifiers are designed and manufactured in Opelousas, Louisiana.
If you are a bass head and want to wake the dead, this setup is going to be right up your alley! This amp is simply amazing in both power and quality. If any of you have ever heard of Lunar amplifiers, then you know what I'm talking about. Lunar amplifiers are hand-built by the same engineer that designed the famous 'old school' Rockford Fosgate amplifiers of the 80's and early 90's, such as the Punch 150, etc.
Lunar L1500:
1 Ohm Mono 500watts x 1
2 Ohm Mono 315watts x 1
4 Ohm Mono 125watts x 1
Over Current Shut Down
Over Temperature Shut Down
SPL Data Input Equipped
Can Be Used As Master Or Slave Unit
0-180 Phase Selectable
LUNAR Exclusive Frequency Compensated Self Exciting Pulse Width Modulated Output Circuit For High Effeciency And Outstanding Sound Quality.
Cone Compensating Circuit Controls Cone Movement As Low As 5hz.
Fuse: 70 amp
Measurements 3.5"x10"x5"http://i177.photobucket.com/albums/w203/BavSound/Lunar1.jpg
http://i177.photobucket.com/albums/w203/BavSound/Lunar2.jpg
http://i177.photobucket.com/albums/w203/BavSound/d210basspackage3.jpg
http://i177.photobucket.com/albums/w203/BavSound/d210basspackage2.jpg
http://i177.photobucket.com/albums/w203/BavSound/d210basspackage1.jpg
Patented,Three Surface, Forced Convection Cooling System
Thermostat controlled fan moves cool air around the internals of the Amplifier, then forces the air over two layers of the heatsink.
Patented, Two Piece Heatsink
Maximum heat dissipation due to the large surface area of the upper and lower heatsink.
Adjustable, Chip Programmable Crossover
The Amplifiers are supplied with 88hz low pass and 106 hz high pass chips in the crossover. Mono Blocks are supplied with 88hz low pass chips. These frquencies can be adjusted by changing the chips inside the Amplifier to fit your needs.
Double Sided FR4.062 Epoxy and Fiberglass Circuit Board
The circuit board is very durable and able to tolerate abuse and high temperatures.
22 Kohm Input Impedence
Compatible with all head units that have RCA outputs. This impendence is easily driven by head units with low voltage outputs.
High Temperature Low Impedence Filters
Primary power supply filtering is accomplished by using these high quality filters.
Proven Through Hole Technology
All holes are plated through which maximizes connections between components and circuit board.
Heavy Duty Output Devices
Output Devices are a common failure in most units. LUNAR uses the heaviest (TO-247) output devices on the market to eleminate this common failure.
Discrete Gain Controls
Each channel has a dedicated gain control to insure proper balance.
Low Resistance Active Global Feedback
This eliminates unwanted movement of the speaker cone. (CONE CONTROL MEANS BETTER SOUND!)
Designed and Manufactured in the U.S.A.
All Amplifiers are designed and manufactured in Opelousas, Louisiana.