View Full Version : E36 with 24mm offset?
Bromaguire
02-05-2007, 11:36 PM
Can I run a 18x9.5 with a 24mm offset in the rear on my m3? My fenders are rolled already too.
KarlSpackler
02-06-2007, 12:38 AM
Yes, easily
Bromaguire
02-06-2007, 01:22 AM
No spacers or anything else will be needed and they won't rub?
Don Nguyen
02-06-2007, 03:48 AM
first of all, do you know what spacers do?
98M3_4
02-06-2007, 04:22 AM
Uh, spacers would lower your effective offset and then most likely you'll rub
DJ Genius
02-06-2007, 04:27 AM
If fenders weren't rolled, would it still be available to run 20-25 offset on E36?
Basicaly, if you have your wheel high enough offset wouldn't matter, right? Cause the wheel is not going under the fender.
Bromaguire
02-06-2007, 08:11 AM
first of all, do you know what spacers do?
Yes I no what spacers do, its sort of given away in its name if I didn't. I was unsure of how an offset effectes a rim. Thanks for the answers though.
Bromaguire
02-06-2007, 08:50 AM
Will 275/35/18 tires fit in the back ?
KarlSpackler
02-06-2007, 08:54 AM
Will 275/35/18 tires fit in the back ?
Most deffinately
Don Nguyen
02-06-2007, 02:46 PM
spacers won't do anything to help you from not rubbing from a wheel that has a low offset already
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.